IBM certifications I C2180-376시험을 패스해서 자격증을 취득하려고 하는데 시험비며 학원비며 공부자료비며 비용이 만만치 않다구요? 제일 저렴한 가격으로 제일 효과좋은Pass4Test 의 IBM certifications I C2180-376덤프를 알고 계시는지요? Pass4Test 의 IBM certifications I C2180-376덤프는 최신 시험문제에 근거하여 만들어진 시험준비공부가이드로서 학원공부 필요없이 IBM certifications I C2180-376덤프공부만으로도 시험을 한방에 패스할수 있습니다. 덤프를 구매하신분은 철저한 구매후 서비스도 받을수 있습니다.
NO.1 A solution designer has requested that several queues on a z/OS queue
manager be
defined with index
type set to message ID, i.e.,
INDXTYPE(MSGID). Why would a designer use this setting?
A. It creates a
permanent index of MSGIDs that are currently in use for this queue.
B. It
allows MQGET commands to have significantly improved performance when
getting
messages by
message ID.
C. It ensures that any new MSGIDs are
unique as well as making the retrieval of messages
based on
message ID
more efficient.
D. The queue manager will keep an index of MSGIDs that have
already been used to make
sure that the
message ID is unique when a new
message is put.
Answer: B
NO.2 A solution designer is considering
different API options for a new WebSphere MQ
application. Only
IBM
supported WebSphere MQ programming options should be considered. Which
one of the
following is not
supported by IBM?
A. XMS
B. JMS
C.
Perl
D. WebSphere MQ classes for .NET
Answer: C
NO.3 A solution
designer is evaluating distribution scenarios and wants to understand
the
circumstances
where messages are not delivered as expected. Which of
the following are reasons that a
message is
placed on the DLQ?
A. A
trigger monitor is unable to start the triggered program
B. The destination
queue is full when the program puts the message to the local queue
C. The
queue manager is quiescing when the program puts the message to the queue
D.
A sending message channel agent is unable to perform data conversion when
required for
the
message
E. The program tries to put a message to an
invalid local queue
Answer: A D
NO.4 An application creates documents
in PDF format, which are subsequently transmitted
via WebSphere
MQ to a
number of other servers in the network. Each server runs its own queue
manager.
The
documents received by some servers are consistently
corrupted, whereas on other servers
the
documents are intact. Other
message traffic seems unaffected. What is the most likely
source of
this
problem?
A. The environment variable MQCCSID specifies an incorrect
value on the affected servers.
B. Incompatible message compression parameters
are configured on the sending and
receiving channel
agents.
C. The
network connection to the affected servers is unreliable and a message retry
exit was
not specified
on the sending channel agent.
D. The affected
servers run different CCSIDs from the servers creating the documents and
the
message
descriptor specifies MQMD.Format as QSTR? causing message
conversion.?QSTR?
causing message
conversion.
Answer: D
NO.5 An
application queue is triggered for trigger type of DEPTH. Following this,
what
action should the job
or program that was started as a result of the
trigger take before it ends, so that the queue
will be
triggered again the
next time that trigger depth (TRIGDPTH) is reached?
A. It needs to use MQSET
or an ALTER QLOCAL command to reset triggering (TRIGGER)
for the queue.
B.
It needs to reset trigger depth (TRIGDPTH) for the queue through an MQSET or
ALTER
QLOCAL
command.
C. It needs to reset trigger depth (TRIGDPTH) and
triggering (TRIGGER) for the queue,
using MQSET or
an ALTER QLOCAL
command.
D. No action needs to be taken. The queue manager will create the
next trigger message
when the
current depth of the queue once again
reaches trigger depth (TRIGDPTH).
Answer: A
NO.6 There are multiple
instances of a cluster queue. Which of the following is
recommended practice
for the
default binding (DEFBIND) parameter?
A. Allow the local WebSphere
MQ administrators to define default binding as they think best
for
each
instance of the queue.
B. Require the WebSphere MQ administrators to
set default binding to the same value for all
instances of
the queue in
the cluster.
C. The solution designer should consult with the development
team and local WebSphere
MQ
administrator to determine how best to
configure default binding of each queue manager.
D. The best option is to
accept the default setting for default binding on each queue manager,
as it
should
have been given the optimal setting by its WebSphere MQ
administrator.
Answer: B
NO.7 In designing a solution with
availability in mind, the designer is considering the
following
two
alternatives, one using a cluster queue and the other using
a shared queue. In each
scenario, Queue
Managers QMA and QMB will both be
capable of running Application A. In the first scenario,
Application
A
will run on QMA and QMB on Windows accessing cluster queue QA. In the
second scenario,
Application A
will run on QMA and QMB on z/OS accessing
shared queue QA. Which of the following
describes the
availability
scenarios in the situation where QMA fails?
A. For Windows, the delivered
messages on QA that Application A on QMA did not get to
process
are
available for processing by Application A on QMB
B. For z/OS, the
delivered messages on QA that Application A on QMA did not get to
process
are
available for processing by Application A on QMB
C. For
Windows, messages from QA that were in flight on QMA when it failed are
made
available for
processing on QMB
D. For z/OS, messages from QA that
were in flight on QMA when it failed are unavailable for
processing
by
QMB
Answer: B
NO.8 A bus company is implementing a solution which will
display in real-time the arrival
information of the
next bus on the bus
stop sign. Each bus is sending information about its position at
regular
intervals. What
is the best way of implementing this solution
given that there is limited bandwidth for
communication? The
bus stop
sign:
A. subscribes to messages published by the bus
B. queries a central
system for bus position using SOAP over HTTP
C. replicates its own database
every few minutes with a database stored on a central system
D. sends a
message with a request every few minutes to a central system in order to
query
bus position.
All replies are compressed.
Answer: A
manager be
defined with index
type set to message ID, i.e.,
INDXTYPE(MSGID). Why would a designer use this setting?
A. It creates a
permanent index of MSGIDs that are currently in use for this queue.
B. It
allows MQGET commands to have significantly improved performance when
getting
messages by
message ID.
C. It ensures that any new MSGIDs are
unique as well as making the retrieval of messages
based on
message ID
more efficient.
D. The queue manager will keep an index of MSGIDs that have
already been used to make
sure that the
message ID is unique when a new
message is put.
Answer: B
NO.2 A solution designer is considering
different API options for a new WebSphere MQ
application. Only
IBM
supported WebSphere MQ programming options should be considered. Which
one of the
following is not
supported by IBM?
A. XMS
B. JMS
C.
Perl
D. WebSphere MQ classes for .NET
Answer: C
NO.3 A solution
designer is evaluating distribution scenarios and wants to understand
the
circumstances
where messages are not delivered as expected. Which of
the following are reasons that a
message is
placed on the DLQ?
A. A
trigger monitor is unable to start the triggered program
B. The destination
queue is full when the program puts the message to the local queue
C. The
queue manager is quiescing when the program puts the message to the queue
D.
A sending message channel agent is unable to perform data conversion when
required for
the
message
E. The program tries to put a message to an
invalid local queue
Answer: A D
NO.4 An application creates documents
in PDF format, which are subsequently transmitted
via WebSphere
MQ to a
number of other servers in the network. Each server runs its own queue
manager.
The
documents received by some servers are consistently
corrupted, whereas on other servers
the
documents are intact. Other
message traffic seems unaffected. What is the most likely
source of
this
problem?
A. The environment variable MQCCSID specifies an incorrect
value on the affected servers.
B. Incompatible message compression parameters
are configured on the sending and
receiving channel
agents.
C. The
network connection to the affected servers is unreliable and a message retry
exit was
not specified
on the sending channel agent.
D. The affected
servers run different CCSIDs from the servers creating the documents and
the
message
descriptor specifies MQMD.Format as QSTR? causing message
conversion.?QSTR?
causing message
conversion.
Answer: D
NO.5 An
application queue is triggered for trigger type of DEPTH. Following this,
what
action should the job
or program that was started as a result of the
trigger take before it ends, so that the queue
will be
triggered again the
next time that trigger depth (TRIGDPTH) is reached?
A. It needs to use MQSET
or an ALTER QLOCAL command to reset triggering (TRIGGER)
for the queue.
B.
It needs to reset trigger depth (TRIGDPTH) for the queue through an MQSET or
ALTER
QLOCAL
command.
C. It needs to reset trigger depth (TRIGDPTH) and
triggering (TRIGGER) for the queue,
using MQSET or
an ALTER QLOCAL
command.
D. No action needs to be taken. The queue manager will create the
next trigger message
when the
current depth of the queue once again
reaches trigger depth (TRIGDPTH).
Answer: A
NO.6 There are multiple
instances of a cluster queue. Which of the following is
recommended practice
for the
default binding (DEFBIND) parameter?
A. Allow the local WebSphere
MQ administrators to define default binding as they think best
for
each
instance of the queue.
B. Require the WebSphere MQ administrators to
set default binding to the same value for all
instances of
the queue in
the cluster.
C. The solution designer should consult with the development
team and local WebSphere
MQ
administrator to determine how best to
configure default binding of each queue manager.
D. The best option is to
accept the default setting for default binding on each queue manager,
as it
should
have been given the optimal setting by its WebSphere MQ
administrator.
Answer: B
NO.7 In designing a solution with
availability in mind, the designer is considering the
following
two
alternatives, one using a cluster queue and the other using
a shared queue. In each
scenario, Queue
Managers QMA and QMB will both be
capable of running Application A. In the first scenario,
Application
A
will run on QMA and QMB on Windows accessing cluster queue QA. In the
second scenario,
Application A
will run on QMA and QMB on z/OS accessing
shared queue QA. Which of the following
describes the
availability
scenarios in the situation where QMA fails?
A. For Windows, the delivered
messages on QA that Application A on QMA did not get to
process
are
available for processing by Application A on QMB
B. For z/OS, the
delivered messages on QA that Application A on QMA did not get to
process
are
available for processing by Application A on QMB
C. For
Windows, messages from QA that were in flight on QMA when it failed are
made
available for
processing on QMB
D. For z/OS, messages from QA that
were in flight on QMA when it failed are unavailable for
processing
by
QMB
Answer: B
NO.8 A bus company is implementing a solution which will
display in real-time the arrival
information of the
next bus on the bus
stop sign. Each bus is sending information about its position at
regular
intervals. What
is the best way of implementing this solution
given that there is limited bandwidth for
communication? The
bus stop
sign:
A. subscribes to messages published by the bus
B. queries a central
system for bus position using SOAP over HTTP
C. replicates its own database
every few minutes with a database stored on a central system
D. sends a
message with a request every few minutes to a central system in order to
query
bus position.
All replies are compressed.
Answer: A