Pass4Test덤프공부가이드는 업계에서 높은 인지도를 자랑하고 있습니다. Pass4Test제품은 업데이트가 가장 빠르고 적중율이 가장 높아 업계의 다른 IT공부자료 사이트보다 출중합니다. Pass4Test의 Genesys Certification GE0-807 덤프는 이해하기 쉽고 모든 Genesys Certification GE0-807 시험유형이 모두 포함되어 있어 Genesys Certification GE0-807 덤프만 잘 이해하고 공부하시면 시험패스는 문제없습니다.
NO.1 If you wish to allow recording on a call, and recording is configured for
two devices on the call.
Which one of the following scenarios is
possible?
A. Call recording will be started when both of the devices signal
EventEstablished.
B. Call recording will be started only on the device that
first signals EventEstablished.
C. Call recording will only be started when
either one of the devices first signals Eventreleased.
D. Call will not be
recorded
Answer: B
NO.2 What Type of DN has to be created for SIP Server or Media
Server integration using MSML?
A. Trunk Group
B. Voice over IP
Service
C. Routing Point
D. Communication DN
E. Voice over IP
Port
F. No DN is necessary. Just the SIP Server option "msml-support=true"
needs to be set
Answer: B
NO.3 What is the SIP Server supported
methods for initiating two-step call transfer? (Choose 2
answers)
A.
INVITE
B. PUBLISH
C. INITIATE
D. REFER
E. MESSAGE
Answer:
A,D
NO.4
Which protocol is SIP Server using in communication with Media Server?
A. CTI
protocol
B. T-Lib
C. SIP
D. H.323
E. voice XML
Answer:
D
NO.5
What does the parameter 'confrole=monitor' in the INVITE message sent to Media
Server
indicate about this participant?
A. is a customer
B. is an
agent
C. is a supervisor doing silent monitoring
D. is a supervisor doing
whisper coaching
E. has to be monitored by recording
Answer: D
NO.6
Which of the following are valid parameters of the Announcement Treatment?
(Choose 2
answers)
A. Language
B. ID
C. Music_DN
D.
Duration
Answer:
A,B
NO.7 When using
the REFER method, where would you specify the party the call is being
transferred
to?
A. Refer header URI
B. To: header
C. contact:
header
D. REFER To: header
E. Is not specified in the REFER
messages
Answer: A
NO.8 What is the meaning of the option 'sip-port'
in the Tserver" section in 'options' tab of the SIP
server?
A. It is the
port used by SIP Server to communicate with other T-lib clients such as URS,
StatServer,
etc
B. It is the port used by SIP Server to communicate with
other SIP devices such as Media Server, SIP
Endpoints, Gateways etc. using
SIP signaling only
C. It is the port used by SIP Server to communicate using
SNMP protocol with a NMS software
D. It is the port used by SIP Server to
communicate with other SIP devices such as Media Server, SIP
Endpoints,
gateways etc. using RTP/RTCP protocol
E. It is the port used by SIP Server to
communicate with other SIP devices such as Media Server, SIP
Endpoints,
F.
Gateways etc. using both RTP/RTCP protocol and SIP signaling.
Answer:
A
two devices on the call.
Which one of the following scenarios is
possible?
A. Call recording will be started when both of the devices signal
EventEstablished.
B. Call recording will be started only on the device that
first signals EventEstablished.
C. Call recording will only be started when
either one of the devices first signals Eventreleased.
D. Call will not be
recorded
Answer: B
NO.2 What Type of DN has to be created for SIP Server or Media
Server integration using MSML?
A. Trunk Group
B. Voice over IP
Service
C. Routing Point
D. Communication DN
E. Voice over IP
Port
F. No DN is necessary. Just the SIP Server option "msml-support=true"
needs to be set
Answer: B
NO.3 What is the SIP Server supported
methods for initiating two-step call transfer? (Choose 2
answers)
A.
INVITE
B. PUBLISH
C. INITIATE
D. REFER
E. MESSAGE
Answer:
A,D
NO.4
Which protocol is SIP Server using in communication with Media Server?
A. CTI
protocol
B. T-Lib
C. SIP
D. H.323
E. voice XML
Answer:
D
NO.5
What does the parameter 'confrole=monitor' in the INVITE message sent to Media
Server
indicate about this participant?
A. is a customer
B. is an
agent
C. is a supervisor doing silent monitoring
D. is a supervisor doing
whisper coaching
E. has to be monitored by recording
Answer: D
NO.6
Which of the following are valid parameters of the Announcement Treatment?
(Choose 2
answers)
A. Language
B. ID
C. Music_DN
D.
Duration
Answer:
A,B
NO.7 When using
the REFER method, where would you specify the party the call is being
transferred
to?
A. Refer header URI
B. To: header
C. contact:
header
D. REFER To: header
E. Is not specified in the REFER
messages
Answer: A
NO.8 What is the meaning of the option 'sip-port'
in the Tserver" section in 'options' tab of the SIP
server?
A. It is the
port used by SIP Server to communicate with other T-lib clients such as URS,
StatServer,
etc
B. It is the port used by SIP Server to communicate with
other SIP devices such as Media Server, SIP
Endpoints, Gateways etc. using
SIP signaling only
C. It is the port used by SIP Server to communicate using
SNMP protocol with a NMS software
D. It is the port used by SIP Server to
communicate with other SIP devices such as Media Server, SIP
Endpoints,
gateways etc. using RTP/RTCP protocol
E. It is the port used by SIP Server to
communicate with other SIP devices such as Media Server, SIP
Endpoints,
F.
Gateways etc. using both RTP/RTCP protocol and SIP signaling.
Answer:
A