현재 경쟁율이 심한IT시대에  HP Certification I HP0-P20 (HP-UX 11i v3 System Administration )   자격증 취득만으로  경쟁이 심한 사회에서 자신만의 위치를 보장할수 있고 더욱이는 한층 업 된 삶을 누릴수 있을수도 있습니다. Pass4Test 에서 여러분은  HP Certification I HP0-P20 (HP-UX 11i v3 System Administration )  관련 공부가이드를 얻을 수 있습니다. Pass4Test는 IT업계엘리트 한 강사들이 퍼펙트한 HP Certification I HP0-P20 (HP-UX 11i v3 System Administration )  문제집을 만들어서 제공합니다.  Pass4Test 에서 제공하는  HP Certific ation I HP0-P20 (HP-UX 11i v3 System Administration )  문제와 답으로 여러분은 한번에 성공적으로 시험을 패스 할수 있습니다.   Pass4 Test 문제집을 선택함으로 여러분의 시간도 절약해드리고 무엇보다도 많은 근심없이 심플하게 시험을 패스하여 좋다는 점입니다.Pass4 Test에는 아주 엘리트한 전문가들로 구성된 팀입니다.   Pass4Test 는 아주 정확하게 또한 아주 신속히  HP Certification I HP0-P20 (HP-UX 11i v3 System Administration )  관한 자료를 제공하며, 업데이트 될 경우 또한 아주 빠르게 뉴 버전을 여러분한테 보내드립니다. Pass4 Test는 관련 업계에서도 우리만의 브랜드 이미지를 지니고 있으며 많은 고객들의 찬사를 받았습니다. HP Certification I HP0-P20 (HP-UX 11i v3 System Administration )   인증시험 패스는 아주 어렵습니다.하지만 Pass4Test의 자료로 충분히 시험 패스할 수 있습니다.만약 Pass4Test 선택여부에 대하여 망설이게 된다면 여러분은 우선 우리 Pass4Test 사이트에서 제공하는  HP Certification I HP0-P20 (HP-UX 11i v3 System Administration )  관련 자료의 일부분 문제와 답 등 샘플을 무료로 다운받아 체험해볼 수 있습니다. 체험 후  Pass4Test에 신뢰감을 느끼게 됩니다. Pass4Test는 여러분이 안전하게   HP Certification I  HP Certification I HP0-P20 (HP-UX 11i v3 System Administration )   시험을 패스할 수 있는 최고의 선택입니다. Pass4Test을 선택함으로써 여러분은 성공도 선택한것이라고 볼수 있습니다.

 

 

NO.1 Which command determines the patches and associated filesets that are currently installed on the
system?
A. check_filesets
B. swlist -l product | grep -i ph
C. swlist -l depot | grep -i ph
D. swlist -l product | grep -i patch
E. swlist -l patch [fileset]
Answer: E

NO.2 Which command boots a vPar, called p1, when at the MON> prompt?
A. vparboot -p p1
B. vparload -p p1
C. vparstart -p p1
D. vparrun -p p1
Answer: B

NO.3 Which file contains the LVM configuration information for LVMv1?
A. lvmpvg
B. lvmtab
C. lvmconf
D. lvminfo
Answer: B

NO.4 What is the minimum Operating Environment (OE) version that includes the Java tools HPjconfig and
HPjmeter?
A. High Availability OE (HA-OE)
B. Base OE (BOE)
C. Virtual Server OE (VSE-OE)
D. Data Center OE (DC-OE)
E. Technical Computing OE (TCOE)
Answer: B

NO.5 DRAG DROP
Click the Task button. Match the patch names with the correct patch functionality. (The HP-UX patch
name format is: PHxx_yyyyy.)
Answer:

NO.6 What are the features and benefits of HP Integrity server's EFI (Extended Firmware Interface).? (Select
two.)
A. provides a shell and scripting support
B. is only required when the system runs vPars
C. enables the hardware to boot different vendors' operating systems
D. holds the kernel of the operating system
E. provides a Boot Maintenance Manager for simultaneous operating system instance boot
Answer: AC

NO.7 Issuing the command make_net_recovery -s <Ignite-UX_server> will create a recovery archive.
What is included in this archive? (Select two.)
A. all customized configuration files needed to rebuild the system
B. LVM configuration information for the root volume group
C. a boot image to bring up the system again
D. an archive of all files and directories contained in the file systems in vg00
E. a bootable client of Data Protector to recover all lost files from the backup server
Answer: BC

NO.8 Which information is provided by the swlist default output? (Select two.)
A. product/bundle size
B. version number
C. state of the product/bundle
D. description of the product/bundle
E. special install instructions
Answer: BD

NO.9 You are performing a cold installation of HP-UX using the Advanced Installation option. On which
menu tab can you add additional disks to the root volume group?
A. Basic
B. Software
C. System
D. File System
E. Advanced
Answer: D

NO.10 DRAG DROP
Click the Task button. Match each patch bundle with its description.
Answer:

NO.11 What are the new features of the HP-UX 11i v3 mass storage stack? (Select two.)
A. It automatically creates the device files for a new device.
B. It automatically installs the kernel drivers for a new device.
C. It provides different load balancing policies for devices.
D. It increases the maximum I/O paths per device to 6.
E. It automatically recreates the LVM structure for a replaced disk.
Answer: AC

NO.12 Which command identifies known security vulnerabilities on the system?
A. swa scan
B. swa ident
C. swa report
D. swa sec_chk
Answer: C

NO.13 What are the major modes for HP-UX Software Assistant?
A. display, get, set, and delete
B. report, get, step, and clean
C. list, get, install, and remove
D. export, import, install, and remove
Answer: B

NO.14 You are upgrading a supported version of HP-UX to 11i v3. You check and resolve the prerequisites
and then you back up your system. What is the next step in the upgrade process?
A. Use update-ux from the command line to start the update.
(for example: update-ux -s /dvdrom HPUX11i-BOE)
B. Update your system using the update-ux Terminal User Interface (TUI).
(for example: update-ux -i -s /dvdrom)
C. Use swinstall to update your system.
(for example: swinstall -s /dvdrom HPUX11i-BOE)
D. Use swinstall to install the latest version of the Update-UX bundle on the target system.
(for example: swinstall -s /dvdrom Update-UX)
Answer: D

NO.15 When you boot from an Ignite server, you initially see a small menu with all HP-UX releases available
on the Ignite server. Which command is used to change the options of this menu?
A. auto_adm
B. make_config
C. dbprofile
D. instl_adm
Answer: A

NO.16 Which technology does the Intel Itanium2 processor use?
A. Super Scalar Reduced Instruction Computing
B. Complex Instruction Set Computing
C. Reduced Instruction Set Computing
D. Explicitly Parallel Instruction Computing
Answer: D

NO.17 You have expanded an existing LUN in your EVA storage. The LUN belongs to an HP-UX 11i v3 LVM
volume group (VG). You want to expand the volume group to reflect the new LUN size. What is the most
efficient way to accomplish this?
A. Create another physical volume and extend your current VG.
B. Back up, remove, create and restore the data to reflect the new size.
C. You cannot expand a physical volume when using LVM.
D. Use the vgmodify command to change the physical volume attributes.
Answer: D

NO.18 Which file systems are included with the HP-UX 11i v3 Base Operating Environment?
A. HFS and Base JFS
B. HFS and VxVM
C. HFS and Online JFS
D. Base JFS and ext3
E. Online JFS and memfs
Answer: A

NO.19 DRAG DROP
Click the Task button. Place an "X" next to the supported update paths from HP-UX 11i v2 to HP- UX 11i
v3 and from the original Operating Environments (OEs) to the new OEs.
img-000 (exhibit):
x (exhibit):
A.
Answer:

NO.20 Which new features of HP-UX 11i v3 potentially increase the overall I/O performance compared to
previous releases of HP-UX 11i? (Select two.)
A. sx2000 chipset support
B. agile device addressing
C. native multipathing
D. Unified File Cache (UFC)
E. persistent device special files
Answer: CD