Pass4Test는 많은 분들이 IT인증시험을 응시하여 성공하도록 도와주는 사이트입니다.  Pass4Test 는 많은 IT전문가들로 구성되었습니다. Pass4Test 의 덤프는 모두 엘리트한 전문가들이 만들어낸 만큼 시험문제의 적중률은 아주 높습니다. 거의 100%의 정확도를 자랑하고 있습니다. 아마 많은 유사한 사이트들도 많습니다. 이러한 사이트에서 학습가이드와 온라인서비스도 지원되고 있습니다만  Pass4Test 는 이미 이러한 사이트를 뛰어넘은 실력으로 업계에서는 우리만의 이미지를 지키고 있습니다. Pass4Test 는 정확한 문제와 답만 제공하고 또한 그 어느 사이트보다도 빠른 업데이트로 여러분의 인증시험을 안전하게 패스하도록합니다.여러분은 아직도   HP HP0-P20 (HP-UX 11i v3 System Administration ) 인증시험의 난이도에 대하여 고민 중입니까? 아직도  HP HP0-P20 (HP-UX 11i v3 System Administration ) 시험 때문에 밤잠도 제대로 이루지 못하면서 시험공부를 하고 계십니까? Pass4Test제품을 사용하시면  빠른 시일내에 많은 공을 들이지 않고 여러분의 꿈을 이룰수 있습니다.Pass4Test 사이트에서 제공하는   HP HP0-P20 (HP-UX 11i v3 System Administration )  관련자료의 일부분문제와답등 샘플을 무료로 다운받아 체험해 봄으로  Pass4Test 에 믿음이 생기게 될 것입니다.  HP HP0-P20 (HP-UX 11i v3 System Admi nistration ) 인증시험을 응시하려는 분들은  Pass4Test  학습가이드의 문제와 답으로 안심하시고 자신 있게 응시하시면 됩니다. Pass4Test 는 여러분이 100%  HP HP0-P20 (HP-UX 11i v3 System Administration )  인증시험을 패스할 수 있다는 것을 보장합니다.

 

 

NO.1 What is the minimum Operating Environment (OE) version that includes the Java tools HPjconfig and
HPjmeter?
A. High Availability OE (HA-OE)
B. Base OE (BOE)
C. Virtual Server OE (VSE-OE)
D. Data Center OE (DC-OE)
E. Technical Computing OE (TCOE)
Answer: B

NO.2 Which command identifies known security vulnerabilities on the system?
A. swa scan
B. swa ident
C. swa report
D. swa sec_chk
Answer: C

NO.3 You have expanded an existing LUN in your EVA storage. The LUN belongs to an HP-UX 11i v3 LVM
volume group (VG). You want to expand the volume group to reflect the new LUN size. What is the most
efficient way to accomplish this?
A. Create another physical volume and extend your current VG.
B. Back up, remove, create and restore the data to reflect the new size.
C. You cannot expand a physical volume when using LVM.
D. Use the vgmodify command to change the physical volume attributes.
Answer: D

NO.4 You are upgrading a supported version of HP-UX to 11i v3. You check and resolve the prerequisites
and then you back up your system. What is the next step in the upgrade process?
A. Use update-ux from the command line to start the update.
(for example: update-ux -s /dvdrom HPUX11i-BOE)
B. Update your system using the update-ux Terminal User Interface (TUI).
(for example: update-ux -i -s /dvdrom)
C. Use swinstall to update your system.
(for example: swinstall -s /dvdrom HPUX11i-BOE)
D. Use swinstall to install the latest version of the Update-UX bundle on the target system.
(for example: swinstall -s /dvdrom Update-UX)
Answer: D

NO.5 Which file contains the LVM configuration information for LVMv1?
A. lvmpvg
B. lvmtab
C. lvmconf
D. lvminfo
Answer: B

NO.6 You are performing a cold installation of HP-UX using the Advanced Installation option. On which
menu tab can you add additional disks to the root volume group?
A. Basic
B. Software
C. System
D. File System
E. Advanced
Answer: D

NO.7 Which technology does the Intel Itanium2 processor use?
A. Super Scalar Reduced Instruction Computing
B. Complex Instruction Set Computing
C. Reduced Instruction Set Computing
D. Explicitly Parallel Instruction Computing
Answer: D

NO.8 What are the features and benefits of HP Integrity server's EFI (Extended Firmware Interface).? (Select
two.)
A. provides a shell and scripting support
B. is only required when the system runs vPars
C. enables the hardware to boot different vendors' operating systems
D. holds the kernel of the operating system
E. provides a Boot Maintenance Manager for simultaneous operating system instance boot
Answer: AC

NO.9 What are the new features of the HP-UX 11i v3 mass storage stack? (Select two.)
A. It automatically creates the device files for a new device.
B. It automatically installs the kernel drivers for a new device.
C. It provides different load balancing policies for devices.
D. It increases the maximum I/O paths per device to 6.
E. It automatically recreates the LVM structure for a replaced disk.
Answer: AC

NO.10 Which command determines the patches and associated filesets that are currently installed on the
system?
A. check_filesets
B. swlist -l product | grep -i ph
C. swlist -l depot | grep -i ph
D. swlist -l product | grep -i patch
E. swlist -l patch [fileset]
Answer: E

NO.11 When you boot from an Ignite server, you initially see a small menu with all HP-UX releases available
on the Ignite server. Which command is used to change the options of this menu?
A. auto_adm
B. make_config
C. dbprofile
D. instl_adm
Answer: A

NO.12 Which command boots a vPar, called p1, when at the MON> prompt?
A. vparboot -p p1
B. vparload -p p1
C. vparstart -p p1
D. vparrun -p p1
Answer: B

NO.13 Issuing the command make_net_recovery -s <Ignite-UX_server> will create a recovery archive.
What is included in this archive? (Select two.)
A. all customized configuration files needed to rebuild the system
B. LVM configuration information for the root volume group
C. a boot image to bring up the system again
D. an archive of all files and directories contained in the file systems in vg00
E. a bootable client of Data Protector to recover all lost files from the backup server
Answer: BC

NO.14 DRAG DROP
Click the Task button. Place an "X" next to the supported update paths from HP-UX 11i v2 to HP- UX 11i
v3 and from the original Operating Environments (OEs) to the new OEs.
img-000 (exhibit):
x (exhibit):
A.
Answer:

NO.15 Which new features of HP-UX 11i v3 potentially increase the overall I/O performance compared to
previous releases of HP-UX 11i? (Select two.)
A. sx2000 chipset support
B. agile device addressing
C. native multipathing
D. Unified File Cache (UFC)
E. persistent device special files
Answer: CD

NO.16 DRAG DROP
Click the Task button. Match each patch bundle with its description.
Answer:

NO.17 Which file systems are included with the HP-UX 11i v3 Base Operating Environment?
A. HFS and Base JFS
B. HFS and VxVM
C. HFS and Online JFS
D. Base JFS and ext3
E. Online JFS and memfs
Answer: A

NO.18 DRAG DROP
Click the Task button. Match the patch names with the correct patch functionality. (The HP-UX patch
name format is: PHxx_yyyyy.)
Answer:

NO.19 What are the major modes for HP-UX Software Assistant?
A. display, get, set, and delete
B. report, get, step, and clean
C. list, get, install, and remove
D. export, import, install, and remove
Answer: B

NO.20 Which information is provided by the swlist default output? (Select two.)
A. product/bundle size
B. version number
C. state of the product/bundle
D. description of the product/bundle
E. special install instructions
Answer: BD