Pass4Test는 IT업계 전문가들이 그들의 노하우와 몇 년간의 경험 등으로 자료의 정확도를 높여 응시자들의 요구를 만족시켜 드립니다.  Pass4Test 는 꼭 한번에  HP Certification III HP2-T16 (Industry Stand ard Architecture and Technology) 시험을 패스할 수 있도록 도와드릴 것입니다. 여러분은  HP Certifi cation III HP2-T16 (Industry Standard Architecture and Technology) 시험자료 구매로 제일 정확하고 또 최신 시험 문제에 대비한 학습가이드를 사용할 수 있습니다. Pass4Test의 인증시험 적중율은 아주 높습니다. 때문에 많은 IT인증시험 준비중인 분들에게 많은 편리를 드릴수 있습니다.100%정확도 100%신뢰! 여러분은 마음 편히 응시하시면 됩니다.Pass4Test는 여러분의 시간을 절약해드릴 뿐만 아니라 여러분들이 안심하고 응시하여 순조로이 패스할수 있도록 도와주는 사이트 입니다. Pass4Test는 믿을 수 있는 사이트입니다. IT업계에서는 이미 많이 알려져 있습니다. 그리고 여러분에 신뢰를 드리기 위하여    HP Certification III HP2-T16 (Industry Standard Architecture and Technology)  관련자료의 일부분 문제와 답 등 샘플을 무료로 다운받아 체험해볼 수 있게 제공합니다. 아주 만족할 것이라고 믿습니다.  Pass4Test제품에 대하여 아주 자신이 있습니다.   HP Certification III HP2-T16 (Industry Standa rd Architecture and Technology)  도 여러분의 무용지물이 아닌 아주 중요한 자료가 되리라 믿습니다. 여러분께서는 아주 순조로이 시험을 패스하실 수 있을 것입니다.

 

 

NO.1 How does single-mode fiber compare with multimode fiber?
A. Single mode fiber has a higher bandwidth and lower loss.
B. Multimode fiber has a higher bandwidth and lower loss.
C. Multimode fiber is more often used for long-distance telecommunications.
D. Single-mode fiber has higher loss and lower bandwidth.
Answer: A

NO.2 You are comparing similar versions of Intel Xeon and AMD Opteron processors. Which statements are
true about these processors? (Select two)
A. Opteron processors use a Northbridge that operates at core bus speed.
B. AMD Opteron processors are optimized for virtualization and AMD-V technology.
C. An Intel Xeon processor uses HyperTransport link to access its memory.
D. Intel Xeon processors are optimized for virtualization with Intel VT technology.
E. An AMD Opteron processors uses QuickPath Interconnect to access its memory.
Answer: BD

NO.3 Which Network Operating System (NOS) security practices are commonly used when planning server
management? (Select three)
A. disable FTP and SSH
B. install hardware and software firewalls
C. disable unused TCP/IP service ports
D. use easy to remember password
E. enforce regular password changes
Answer: BCE

NO.4 Which command can be used to verify connectivity to a client machine?
A. ping
B. nslookup
C. nbstat
D. ipconfig
Answer: A

NO.5 Which port type does a host server use when connected to an FC-SAN?
A. N_Port
B. E_Port
C. G_Port
D. F_Port
Answer: A

NO.6 What must you check prior to adding another processor to an existing system? (Select Three)
A. amount of memory in the system
B. compatibility of the new processor with existing processors
C. firmware requirements for the new processor
D. number of users currently logged into the system
E. number of processors the operating system supports
F. weight of the new processor
Answer: BCE

NO.7 Which statements are true about AMD 2P or 4P system architecture? (Select three)
A. Requests for memory access are handle by the Northbridge ASIC.
B. Memory must be installed in banks corresponding to the installed processors.
C. Each processor has its own memory controller
D. The maximum amount of memory can be installed, regardless of the number of installed processors.
E. Requests for memory access are handle directly by the corresponding processor and relayed through
the HyperTransport link.
F. Communications between CPU and memory is handle through the QuickPath Interconnect.
Answer: BCE

NO.8 What happens when you install a 66Mhz, 32-bit PCI card in a 33MHz, 64-bit PCI slot?
A. The 66MHz, 32-bit card operates at 33MHz in 64-bit mode.
B. The 66MHz, 32-bit card operates at 66MHz in 32-bit mode.
C. All 33MHz, 64-bit cards on the PCI bus operate like 33MHz, 32-bit cards.
D. The 66MHz card operates at 33MHz.
Answer: D

NO.9 Why should server firmware be updated to the most recent version? (Select two)
A. to maintain a valid warranty
B. to fix problems from earlier versions
C. to support new features
D. to refresh changes that a user has edited in the existing firmware
E. to support leagcy features
Answer: BC

NO.10 Into which range do reserved TCP/IP server ports generally fall?
A. 0-1023
B. 1-512
C. 21-80
D. 1024-8080
Answer: A

NO.11 What can you do to optimize memory performance?
A. Enable Advanced Memory Buffer.
B. Rearrange existing memory to allow interleaving.
C. Implement memory caching
D. Configure processor interleaving.
Answer: B

NO.12 A customer is running a single-threaded application and experiences performance problems connected
with the processor subsystem. How would you solve this issue?
A. Change processor affinity to enable splitting single threads into multiple threads
B. Add additional processors
C. Upgrade the processor with a higher frequency processor.
D. Replace the processor with a higher stepping processor
E. Upgrade the processor with a multi-core processor.
F. Enable the integrated memory controller of the process at the BIOS.
Answer: C

NO.13 What does a system require to achieve PCI Hot Plug capability? (Select three)
A. hot-plug fans
B. hog-plug operating systems
C. hot-plug adapter drivers
D. hot-plug memory
E. hot-plug system tray
F. hot-plug platform
Answer: BCF

NO.14 Which major challenges of I/O virtualization do Virtual Machine Managers need to address? (Select
two)
A. WWN virtualization
B. DMA virtualization
C. IRQ virtualization
D. port virtualization
E. MAC virtualization
Answer: AE

NO.15 Which server filters outgoing network requests?
A. FTP
B. Proxy
C. DNS
D. WINS
Answer: B

NO.16 Your RAID 5 array on a Smart Array sustains a drive failure. A host spare replaces the failed drive
and rebuilds successfully. After replacing the failed drive with a new drive, what happens next?
A. The spare drive replicates its data to the new drive and both work as a mirror until you evict the spare
drive.
B. The new drive stays offline until you assign it to the array, at which point it automatically takes the place
of the spare drive.
C. The new drive re-assumes its place in the RAID set and after data rebuild is complete, the drive that
was the spare once again becomes a hot spare drive.
D. The new drive becomes a spare drive and you must go to the ACU to remove the old spare drive and
then re-add the new drive to the array.
Answer: C

NO.17 What is the virtual machine instance commonly called?
A. guest
B. host
C. partition
D. hypervisor
Answer: A

NO.18 What must you check prior to adding another processor to an existing system.? (Select Three)
A. amount of memory in the system
B. compatibility of the new processor with existing processors
C. firmware requirements for the new processor
D. number of users currently logged into the system
E. number of processors the operating system supports
F. weight of the new processor
Answer: BCE

NO.19 Which technology should you implement for disk redundancy?
A. SATA
B. NTFS
C. RAID
D. SCSI
Answer: C

NO.20 Which Network Operating System (NOS) filesystem allows you to set security on invididual files?
A. FAT32
B. FAT
C. NTFS
D. CDFS
Answer: C