Pass4Test에는 전문적인 업계인사들이  HP HP2-T16 (Industry Standard Architecture and Technology) 시험문제와 답에 대하여 연구하여, 시험준비중인 여러분들한테 유용하고 필요한 시험가이드를 제공합니다. 만약 Pass4Test의 제품을 구매하려면, 우리Pass4Test에서는 아주 디테일 한 설명과 최신버전 최고품질의 자료를 적중율이 높은 문제와 답을 제공합니다.만약 아직도   HP HP2-T16 (Industry Standard Architecture and Technology) 인증시험 응시로 인하여 많은 시간과 정력을 소모하며 열심히 공부하고 있습니까? 아직도 어떻게 하면   HP HP2-T16 (Industry Standard Architecture and Technology)  인증시험을 빠르게 취득할 수 있는 방법을 못찿고 계십니까? 지금 Pass4Test에서 HP HP2-T16 (Industry Standard Architecture and Technology) 인증시험을 안전하게 넘을 수 있도록 대책을 내드리겠습니다. 아주 신기한 효과가 있을 것입니다. HP HP2-T16 (Industry Standard Architecture and Technology) 자료는 충분한 시험대비 자료가 될 것입니다. 안심하시고 Pass4Test가 제공하는 제품을 사용하시고, 100%통과 율을 확신합니다.다른 사이트에서도    HP HP2-T16 (Industry Standard Architecture and Technology) 인증시험 관련 자료를 보셨다고 믿습니다. Pass4Test의 자료는 차원이 다른 완벽한 자료입니다.

 

 

NO.1 What can you do to optimize memory performance?
A. Enable Advanced Memory Buffer.
B. Rearrange existing memory to allow interleaving.
C. Implement memory caching
D. Configure processor interleaving.
Answer: B

NO.2 How does single-mode fiber compare with multimode fiber?
A. Single mode fiber has a higher bandwidth and lower loss.
B. Multimode fiber has a higher bandwidth and lower loss.
C. Multimode fiber is more often used for long-distance telecommunications.
D. Single-mode fiber has higher loss and lower bandwidth.
Answer: A

NO.3 Which command can be used to verify connectivity to a client machine?
A. ping
B. nslookup
C. nbstat
D. ipconfig
Answer: A

NO.4 Your RAID 5 array on a Smart Array sustains a drive failure. A host spare replaces the failed drive
and rebuilds successfully. After replacing the failed drive with a new drive, what happens next?
A. The spare drive replicates its data to the new drive and both work as a mirror until you evict the spare
drive.
B. The new drive stays offline until you assign it to the array, at which point it automatically takes the place
of the spare drive.
C. The new drive re-assumes its place in the RAID set and after data rebuild is complete, the drive that
was the spare once again becomes a hot spare drive.
D. The new drive becomes a spare drive and you must go to the ACU to remove the old spare drive and
then re-add the new drive to the array.
Answer: C

NO.5 Why should server firmware be updated to the most recent version? (Select two)
A. to maintain a valid warranty
B. to fix problems from earlier versions
C. to support new features
D. to refresh changes that a user has edited in the existing firmware
E. to support leagcy features
Answer: BC

NO.6 Which major challenges of I/O virtualization do Virtual Machine Managers need to address? (Select
two)
A. WWN virtualization
B. DMA virtualization
C. IRQ virtualization
D. port virtualization
E. MAC virtualization
Answer: AE

NO.7 You are comparing similar versions of Intel Xeon and AMD Opteron processors. Which statements are
true about these processors? (Select two)
A. Opteron processors use a Northbridge that operates at core bus speed.
B. AMD Opteron processors are optimized for virtualization and AMD-V technology.
C. An Intel Xeon processor uses HyperTransport link to access its memory.
D. Intel Xeon processors are optimized for virtualization with Intel VT technology.
E. An AMD Opteron processors uses QuickPath Interconnect to access its memory.
Answer: BD

NO.8 Which statements are true about AMD 2P or 4P system architecture? (Select three)
A. Requests for memory access are handle by the Northbridge ASIC.
B. Memory must be installed in banks corresponding to the installed processors.
C. Each processor has its own memory controller
D. The maximum amount of memory can be installed, regardless of the number of installed processors.
E. Requests for memory access are handle directly by the corresponding processor and relayed through
the HyperTransport link.
F. Communications between CPU and memory is handle through the QuickPath Interconnect.
Answer: BCE

NO.9 Which server filters outgoing network requests?
A. FTP
B. Proxy
C. DNS
D. WINS
Answer: B

NO.10 What is the virtual machine instance commonly called?
A. guest
B. host
C. partition
D. hypervisor
Answer: A

NO.11 Into which range do reserved TCP/IP server ports generally fall?
A. 0-1023
B. 1-512
C. 21-80
D. 1024-8080
Answer: A

NO.12 What must you check prior to adding another processor to an existing system.? (Select Three)
A. amount of memory in the system
B. compatibility of the new processor with existing processors
C. firmware requirements for the new processor
D. number of users currently logged into the system
E. number of processors the operating system supports
F. weight of the new processor
Answer: BCE

NO.13 Which Network Operating System (NOS) security practices are commonly used when planning server
management? (Select three)
A. disable FTP and SSH
B. install hardware and software firewalls
C. disable unused TCP/IP service ports
D. use easy to remember password
E. enforce regular password changes
Answer: BCE

NO.14 A customer is running a single-threaded application and experiences performance problems connected
with the processor subsystem. How would you solve this issue?
A. Change processor affinity to enable splitting single threads into multiple threads
B. Add additional processors
C. Upgrade the processor with a higher frequency processor.
D. Replace the processor with a higher stepping processor
E. Upgrade the processor with a multi-core processor.
F. Enable the integrated memory controller of the process at the BIOS.
Answer: C

NO.15 What does a system require to achieve PCI Hot Plug capability? (Select three)
A. hot-plug fans
B. hog-plug operating systems
C. hot-plug adapter drivers
D. hot-plug memory
E. hot-plug system tray
F. hot-plug platform
Answer: BCF

NO.16 Which Network Operating System (NOS) filesystem allows you to set security on invididual files?
A. FAT32
B. FAT
C. NTFS
D. CDFS
Answer: C

NO.17 What must you check prior to adding another processor to an existing system? (Select Three)
A. amount of memory in the system
B. compatibility of the new processor with existing processors
C. firmware requirements for the new processor
D. number of users currently logged into the system
E. number of processors the operating system supports
F. weight of the new processor
Answer: BCE

NO.18 What happens when you install a 66Mhz, 32-bit PCI card in a 33MHz, 64-bit PCI slot?
A. The 66MHz, 32-bit card operates at 33MHz in 64-bit mode.
B. The 66MHz, 32-bit card operates at 66MHz in 32-bit mode.
C. All 33MHz, 64-bit cards on the PCI bus operate like 33MHz, 32-bit cards.
D. The 66MHz card operates at 33MHz.
Answer: D

NO.19 Which port type does a host server use when connected to an FC-SAN?
A. N_Port
B. E_Port
C. G_Port
D. F_Port
Answer: A

NO.20 Which technology should you implement for disk redundancy?
A. SATA
B. NTFS
C. RAID
D. SCSI
Answer: C