IT인증,IT자격증,IT자격증시험,IT인증시험

http://www.pass4test.net/

HP Certification I HP0-P21 응시용 덤프

HP Certification I HP0-P21 (HP-UX 11i v3 Advanced System Administration) 인증시험 패스는 아주 어렵습니다.하지만 Pass4Test의 자료로 충분히 시험 패스할 수 있습니다.만약 Pass4Test 선택여부에 대하여 망설이게 된다면 여러분은 우선 우리 Pass4Test 사이트에서 제공하는   HP Certificati on I HP0-P21 (HP-UX 11i v3 Advanced System Administration)  관련 자료의 일부분 문제와 답 등 샘플을 무료로 다운받아 체험해볼 수 있습니다. 체험 후  Pass4Test에 신뢰감을 느끼게 됩니다.

 

Pass4Test는 여러분이 안전하게   HP Certification I HP0-P21 (HP-UX 11i v3 Advanced System Administration)  시험을 패스할 수 있는 최고의 선택입니다. Pass4Test을 선택함으로써 여러분은 성공도 선택한것이라고 볼수 있습니다.Pass4Test 의     HP Certification I HP0-P21 (HP-UX 11i v3 Advanced System Administration)  자료로 자신만만한 시험 준비 하시기를 바랍니다. 우리를 선택함으로 자신의 시간을 아끼는 셈이라고 생각하시면 됩니다.    HP Certification I HP0-P21 (HP-UX 11i v3 Advanced System Administration)   로 빠른 시일내에 자격증 취득하시고    HP Certification I HP0-P21 (HP-UX 11i v3 Advanced System Administration)   IT업계중에 엘리트한 전문가로 되시기를 바랍니다.

 

 

NO.1 Which statements are true about threads and processes for a system running HP-UX? (Select three.)
A. A thread can have multiple processes.
B. The kernel parameter max_thread_proc defines the maximum number of concurrent threads
allowed per process.
C. A thread can be killed using the kill command.
D. The kernel parameter nkthread limits the number of threads allowed to run simultaneously,
system-wide.
E. A process can have multiple threads.
F. A thread is similar to a process, but cannot be switched to a different CPU.
Answer: BDE

NO.2 Which kernel parameter defines the maximum amount of physical memory that can be used for
caching file I/O data?
A. bufpages
B. filecache_max
C. dbc_max_pct
D. nbuf
Answer: B

NO.3 Which file do you edit in order to change the behavior of the syslogd daemon?
A. /etc/syslogd.conf file
B. /etc/syslog.conf file
C. /etc/rc.config.d/syslogd.conf file
D. /var/adm/syslog.conf file
Answer: B

NO.4 What is a characteristic of the Memory File System (MemFS)?
A. It supports /tmp and /var/tmp to be used as a MemFS.
B. It swaps data to swap space when the system is under memory pressure.
C. It uses disk devices to store compressed data.
D. Data in MemFS remain persistent after unmounts and reboots.
Answer: B

NO.5 What are the benefits of the Service guard Storage Management Suite on HP-UX 11i v3? (Select
two.)
A. enables Oracle ASM to run within a file system
B. maintains service levels through the integration with VSE
C. offers tighter integration of Veritas Cluster Server on HP-UX
D. allows for heterogeneous platform support with a single solution
E. enables Oracle RAC customers to get the manageability of a file system
F. provides a single storage management solution to manage all applications
Answer: B, E, F

NO.6 Which properties can be adjusted in the files of the directory /etc/default? (Select four.)
A. time zone
B. new user properties
C. volume manager properties
D. IP addresses for the network interfaces
E. password format policy
F. configuration of the ip_forwarding parameter
G. default kernel parameters
H. maximum sys log size
Answer: ABEH

NO.7 Which command should you use to determine the status of a LUN path?
A. ioscan
B. scsimgr
C. olrad
D. rad
Answer: A

NO.8 You previously set up HP SIM to use username/password authentication with account "wbemacc"
for the WBEM protocol for all of your managed systems. Your site has a policy that user passwords
must change every three months. It also configures PAM to lock out an account after three invalid
password attempts. What are ways to specify a new password before re-running "Identify Systems"?
(Select two.)
A. Invoke mxwbemsub a -c wbemacc:newpass.
B. For each system, invoke mxnodesecurity -a -n <hostname> -p WBEM -c wbemacc:newpass.
C. Use the HP SIM Options->Protocol Settings->Global Protocol Settings menu item.
D. Select all the systems and use the HP SIM Options->Protocol Settings->System Protocol Settings
menu item.
Answer: BD

NO.9 Which command should you run to look at the detailed status of a package called pkg1?
A. cmgetconf -v pkg1
B. cmviewconf -v pkg1
C. cmquerycl -v pkg1
D. cmviewcl -v -p pkg1
Answer: D

NO.10 What are the major advantages of the new Mass Storage Stack of HP-UX 11i v3 compared to
previous HP-UX versions? (Select two.)
A. Device Files are bound to Physical Hardware Paths or LUNs.
B. A significantly larger number of devices can be connected to a single system.
C. When moving devices to different FC switch ports, manual intervention during LVM configuration
is not required.
D. The I/O paths switch transparently in the event of a failure.
E. The Agile Device Files are based on the LUN world wide ID (WWID) address.
Answer: BE

NO.11 You are performing an HP-UX cold installation using the advanced option. Which parameters can you
set on the System Menu tab.? (Select three.)
A. hostname
B. user passwords (non-root)
C. files systems
D. additional interfaces
E. software file sets
F. time zone
Answer: A, D, F

NO.12 What are valid statements when referring to changing system run levels? (Select two.)
A. Run level 1 is the same as single user mode.
B. Run level 5 is the default run level for newly installed servers.
C. The init command can be used to interactively change run levels.
D. Default networking is started in run level 1.
E. The command shutdown can place the system in single user mode.
Answer: CE

NO.13 You have set up a Service guard cluster but received notification from network security that the
current configuration exposes remote user login risks and must be remediated. Which file should be
set up to eliminate the risk?
A. /etc/hosts.equiv
B. /etc/cmcluster/cmclconfig
C. $HOME/.rhosts
D. /etc/cmcluster/cmclnodelist
Answer: D

NO.14 Your /home file system mounted on /dev/vg01/lvol4 is running out of space. Which command
should you use to determine which directory has the largest files?
A. du -k /dev/vg01/lvol4
B. du -ak /home
C. du -as /home
D. du -a /dev/vg01/lvol4
Answer: B

NO.15 What are the key benefits of the 11i v3 Mass Storage Stack? (Select two.)
A. improved security capabilities
B. dramatic I/O performance improvements
C. improved PVLinks for multipathing
D. simplified management and automatic configuration
Answer: BD

NO.16 Which VxVM daemons need to be running for the volume manager to function correctly?
A. vxfsd, vxiod, vxvmd
B. vxfsd, vxiod, vxnotify
C. vxconfigd, vxdctl, vxiod
D. vxconfigd, vxiod, vxrelocd, vxnotify
Answer: D

NO.17 Which functions does the idisk command perform? (Select two.)
A. lists the EFI partition table on a disk
B. creates a new partition table based on the /tmp/idtable file
C. validates the EFI partition information
D. allows the creation of up to 16 partitions
E. lists the usable blocks available for partitioning
Answer: AC

NO.18 You just installed a new HP-UX server named wildcat on your company intranet. You have Ignite-UX
running on a server named ignite_server. What must you do to create a recovery image for the new
server? (Select two.)
A. Ensure the new server has sufficient space in /var.
B. Install Ignite-UX on wildcat.
C. Check the log files in wildcat.
D. Run make_net_recovery -s ignite_server on wildcat.
E. Check the log files in ignite_server.
Answer: BD

NO.19 Management purchases an Integrity Superdome to replace two HP rp8420 Servers. There is available
CPU capacity and management decides to bring additional applications for execution on the Integrity
Superdome. Based on this scenario, which statements can be true? (Select two.)
A. Some of the applications are Linux-based and Linux applications are not supported to run on an
Integrity Superdome.
B. Some of the applications are Linux-based and Linux applications will run in an HP Integrity Virtual
Machine on an Integrity Superdome.
C. Some of the applications are Windows-based that run alongside HP-UX applications in a different
vPar inside of an Integrity Superdome.
D. Some of the applications are Windows-based that run alongside HP-UX applications in a different
nPar inside of an Integrity Superdome.
Answer: BD

NO.20 Which LVM feature does Service guard use?
A. delayed activation
B. inclusive activation
C. exclusive activation
D. temporary activation
Answer: C
 

Pass4Test 는 백프로 여러분들한테 편리함과 통과율을 보장 드립니다. 여러분이 안전하게    HP Certification I HP0-P21 (HP-UX 11i v3 Advanced System Administration)  시험을 패스할 수 있는 곳은 바로 Pass4Test입니다.인증시험을 패스하려면 시험대비 자료 선택은 필수입니다.Pass4Test 의 전문가들은 모두 경험도 많고, 그들이 연구해낸 자료는 실제시험의 문제를 많이 적중하고 있습니다.
Posted 2012/11/29 7:42:54  |  Category: 미분류  |  Tag: