IT인증,IT자격증,IT자격증시험,IT인증시험

http://www.pass4test.net/

HP HP0-P21 (HP-UX 11i v3 Advanced System Ad mnistration) Exam 덤프

인재도 많고 경쟁도 많은 이 사회에, IT업계 인재들은 인기가 아주 많습니다.하지만 팽팽한 경쟁률도 무시할 수 없습니다.많은  IT인재들도 어려운 인증시험을 패스하여 자기만의 자리를 지켜야만 합니다.우리 Pass4Test에서는 마침 전문적으로 이러한 IT인사들에게 편리하게 시험을 패스할수 있도록 유용한 자료들을 제공하고 있습니다.  HP HP0-P21 (HP-UX 11i v3 Advanced System Ad mnistration)  인증은 아주 중요한 인증시험중의 하나입니다.

 

Pass4Test에서는 이미   HP HP0-P21 (HP-UX 11i v3 Advanced System Administration)   인증시험의 일부 문제와 답을 사이트에 올려놓았으니 체험해보실 수 있습니다. Pass4Test 의  HP HP0-P21 (HP-UX 11i v3 Advanced System Administration)  덤프에 신뢰가 갈 것이며 또 망설임 없이 선택하게 될 것입니다.  Pass4Test  덤프로 여러분은 한번에 시험을 패스할 수 있으며 또 개인시간도 절약하고 무엇보다도 금전상으로 절약이 제일 크다고 봅니다.

 

NO.1 Which properties can be adjusted in the files of the directory /etc/default? (Select four.)
A. time zone
B. new user properties
C. volume manager properties
D. IP addresses for the network interfaces
E. password format policy
F. configuration of the ip_forwarding parameter
G. default kernel parameters
H. maximum sys log size
Answer: ABEH

NO.2 Which functions does the idisk command perform? (Select two.)
A. lists the EFI partition table on a disk
B. creates a new partition table based on the /tmp/idtable file
C. validates the EFI partition information
D. allows the creation of up to 16 partitions
E. lists the usable blocks available for partitioning
Answer: AC

NO.3 Which kernel parameter defines the maximum amount of physical memory that can be used for
caching file I/O data?
A. bufpages
B. filecache_max
C. dbc_max_pct
D. nbuf
Answer: B

NO.4 Which file do you edit in order to change the behavior of the syslogd daemon?
A. /etc/syslogd.conf file
B. /etc/syslog.conf file
C. /etc/rc.config.d/syslogd.conf file
D. /var/adm/syslog.conf file
Answer: B

NO.5 Which command should you run to look at the detailed status of a package called pkg1?
A. cmgetconf -v pkg1
B. cmviewconf -v pkg1
C. cmquerycl -v pkg1
D. cmviewcl -v -p pkg1
Answer: D

NO.6 What are valid statements when referring to changing system run levels? (Select two.)
A. Run level 1 is the same as single user mode.
B. Run level 5 is the default run level for newly installed servers.
C. The init command can be used to interactively change run levels.
D. Default networking is started in run level 1.
E. The command shutdown can place the system in single user mode.
Answer: CE

NO.7 Which statements are true about threads and processes for a system running HP-UX? (Select three.)
A. A thread can have multiple processes.
B. The kernel parameter max_thread_proc defines the maximum number of concurrent threads
allowed per process.
C. A thread can be killed using the kill command.
D. The kernel parameter nkthread limits the number of threads allowed to run simultaneously,
system-wide.
E. A process can have multiple threads.
F. A thread is similar to a process, but cannot be switched to a different CPU.
Answer: BDE

NO.8 What are the key benefits of the 11i v3 Mass Storage Stack? (Select two.)
A. improved security capabilities
B. dramatic I/O performance improvements
C. improved PVLinks for multipathing
D. simplified management and automatic configuration
Answer: BD

NO.9 You previously set up HP SIM to use username/password authentication with account "wbemacc"
for the WBEM protocol for all of your managed systems. Your site has a policy that user passwords
must change every three months. It also configures PAM to lock out an account after three invalid
password attempts. What are ways to specify a new password before re-running "Identify Systems"?
(Select two.)
A. Invoke mxwbemsub a -c wbemacc:newpass.
B. For each system, invoke mxnodesecurity -a -n <hostname> -p WBEM -c wbemacc:newpass.
C. Use the HP SIM Options->Protocol Settings->Global Protocol Settings menu item.
D. Select all the systems and use the HP SIM Options->Protocol Settings->System Protocol Settings
menu item.
Answer: BD

NO.10 Which command should you use to determine the status of a LUN path?
A. ioscan
B. scsimgr
C. olrad
D. rad
Answer: A

NO.11 Management purchases an Integrity Superdome to replace two HP rp8420 Servers. There is available
CPU capacity and management decides to bring additional applications for execution on the Integrity
Superdome. Based on this scenario, which statements can be true? (Select two.)
A. Some of the applications are Linux-based and Linux applications are not supported to run on an
Integrity Superdome.
B. Some of the applications are Linux-based and Linux applications will run in an HP Integrity Virtual
Machine on an Integrity Superdome.
C. Some of the applications are Windows-based that run alongside HP-UX applications in a different
vPar inside of an Integrity Superdome.
D. Some of the applications are Windows-based that run alongside HP-UX applications in a different
nPar inside of an Integrity Superdome.
Answer: BD

NO.12 What are the benefits of the Service guard Storage Management Suite on HP-UX 11i v3? (Select
two.)
A. enables Oracle ASM to run within a file system
B. maintains service levels through the integration with VSE
C. offers tighter integration of Veritas Cluster Server on HP-UX
D. allows for heterogeneous platform support with a single solution
E. enables Oracle RAC customers to get the manageability of a file system
F. provides a single storage management solution to manage all applications
Answer: B, E, F

NO.13 What are the major advantages of the new Mass Storage Stack of HP-UX 11i v3 compared to
previous HP-UX versions? (Select two.)
A. Device Files are bound to Physical Hardware Paths or LUNs.
B. A significantly larger number of devices can be connected to a single system.
C. When moving devices to different FC switch ports, manual intervention during LVM configuration
is not required.
D. The I/O paths switch transparently in the event of a failure.
E. The Agile Device Files are based on the LUN world wide ID (WWID) address.
Answer: BE

NO.14 You have set up a Service guard cluster but received notification from network security that the
current configuration exposes remote user login risks and must be remediated. Which file should be
set up to eliminate the risk?
A. /etc/hosts.equiv
B. /etc/cmcluster/cmclconfig
C. $HOME/.rhosts
D. /etc/cmcluster/cmclnodelist
Answer: D

NO.15 Which LVM feature does Service guard use?
A. delayed activation
B. inclusive activation
C. exclusive activation
D. temporary activation
Answer: C

 

 

Pass4Test 는 완전히 여러분이 인증시험 준비와 안전한 시험패스를 위한 완벽한 덤프제공 사이트입니다.우리 Pass4Test의 덤프들은 응시자에 따라  시험 ,시험방법에 따라  알 맞춤한 퍼펙트한 자료입니다.여러분은 Pass4Test의 알맞춤 덤프들로 아주 간단하고 편하게  인증시험을 패스할 수 있습니다.많은  it인증관연 응시자들은  우리  Pass4Test가 제공하는 문제와 답으로 되어있는 덤프로 자격증을 취득하셨습니다.우리 Pass4Test 또한 업계에서 아주 좋은 이미지를 가지고 있습니다.
Posted 2012/11/29 7:42:23  |  Category: 미분류  |  Tag: