만약 아직도    Cisco Designing for Cisco Internetwork Solutions  640-864  인증시험 응시로 인하여 많은 시간과 정력을 소모하며 열심히 공부하고 있습니까? 아직도 어떻게 하면    Cisco Designing for Cisco Internetwork Solutions  640-864   인증시험을 빠르게 취득할 수 있는 방법을 못찿고 계십니까? 지금 Pass4Test에서   Cisco Designing for Cisco Internetwork Solutions  640-864  인증시험을 안전하게 넘을 수 있도록 대책을 내드리겠습니다. 아주 신기한 효과가 있을 것입니다.

 

 

Pass4Test에는 전문적인 업계인사들이   Cisco Designing for Cisco Internetwork Solutions  640-864  시험문제와 답에 대하여 연구하여, 시험준비중인 여러분들한테 유용하고 필요한 시험가이드를 제공합니다. 만약 Pass4Test의 제품을 구매하려면, 우리Pass4Test에서는 아주 디테일 한 설명과 최신버전 최고품질의 자료를 적중율이 높은 문제와 답을 제공합니다.

 

Cisco Designing for Cisco Internetwork Solutions  640-864 자료는 충분한 시험대비 자료가 될 것입니다. 안심하시고 Pass4Test가 제공하는 제품을 사용하시고, 100%통과 율을 확신합니다.다른 사이트에서도   Cisco Designing for Cisco Internetwork Solutions  640-864  인증시험 관련 자료를 보셨다고 믿습니다. Pass4Test의 자료는 차원이 다른 완벽한 자료입니다.100%통과율은 물론 Pass4Test을 선택으로 여러분의 직장생활에 더 낳은 개변을 가져다 드립니다.

 

NO.1 Refer to the exhibit.
Model A is the recommended design for routing between Building Distribution switches and Campus Core
switches. Which two statements describe the reasons? (Choose two)
A. Model A uses timer-based non-deterministic convergence.
B. Mode A uses timer-based, providing fast convergence to the remaining path.
C. In Model A, a link or box failure does not require routing protocol convergence.
D. In Model A, the Layer 3 redundant equal cost links support fast convergence.
Answer: CD

NO.2 Which two of these practices are considered to be best practices when designing the access layer for
the enterprise campus? (Choose two)
A. Implement all of the services (QoS, security, STP, and so on) in the access layer, offloading the work
from the distribution and core layers.
B. Always use a Spanning Tree Protocol; preferred is Rapid PVST+.
C. Use automatic VLAN pruning to prune unused VLANs from trunked interface to avoid broadcast
propagation.
D. Avoid wasted processing by disabling STP where loops are not possible.
E. Use VTP transparent mode to decrease the potential for operational error "First Test,
Answer: BE

NO.3 In terms of remote office design, which one of these statements is a characteristics only of a small
remote office (up to 50 user), and not of medium or remote offices?
A. Link redundancy to access layer switches is not possible with an integrated design.
B. A collapsed access and distribution layer is required.
C. There are no loops in the network design.
D. Layer 3 services such as DHCP, firewall, and NAT are provided by enterprise campus.
Answer: C

NO.4 Which one of these statements is true concerning the enterprise data center?
A. It can be located either at the enterprise campus or at a remote branch.
B. Remote data center connectivity requirements align with the small office design.
C. The data center designs will differ substantially depending on whether the location is on campus or
remote.
D. A remote branch with a data center becomes the enterprise campus.
Answer: C

NO.5 Which consideration is the most important for the network designer when considering IP routing?
A. convergence
B. scalability
C. on-demand routing
D. redistribution
Answer: A

NO.6 Which of these is the best routing deployment for a single dedicated link to an ISP for Internet access?
A. EIGRP
B. RIP
C. BGP
D. Static
E. OSPF
Answer: D

NO.7 A global corporation has an internal network with the following characteristics:
- 2,000,000+ hosts
- 10,000 + routers
- Internal connectivity
- high traffic volumes with business partners and customers
Which statement best describes what a flexible IPv6 strategy would look like for this corporation?
A. Both hosts and routers would run dual stack
B. Hosts would run IPv4 and routers would run native IPv6
C. Hosts would run dual stack and routers would run IPv4 only
D. Hosts would run IPv6 and routers would run native IPv6
Answer: A

NO.8 With deterministic Wireless LAN Controller redundancy design, the different options available to the
designer have their own strengths. Which one of these statements is an example of such a strength?
A. Dynamic load balancing, or salt-and-pepper access point design, avoids the potential impact of
oversubscription on aggregate network performance.
B. N+N redundancy configuration allows logically grouping access points on controllers to minimize
intercontroller roaming events.
C. N+N+1 redundancy configuration has the least impact to system management because all of the
controllers are collocated in an NOC or data center
D. N+1 redundancy configuration uses Layer 3 intercontroller roaming, maintaining traffic on the same
subnet for more efficiency.
Answer: B

NO.9 DataQuirk is a web-based medical transcription company for exotic-animal veterinarians. The company
recently added a third ISP for international business. They are organizing the enterprise network into a
fully operational Enterprise Edge.
To which two modules will the three ISPs be directly related? (Choose two)
A. PSTN
B. E- Commerce
C. WAN/MAN
D. Edge Distribution
E. Internet Connectivity
F. Remote Access VPN
Answer: BE

NO.10 You want to gather as much detail as possible during a network audit, to include data time stamping
across a large number of interfaces, customized according to interface, with a minimal impact on the
network devices themselves.
Which tool would you use to meet these requirements?
A. RMON
B. SNMFV3
C. NetFlow
D. Cisco Discovery Protocol
Answer: C

NO.11 Which one of these statements should the designer keep in mind when considering the advanced
routing features?
A. one-way router redistribution avoids the requirement for state or default routes.
B. Redistribution, summarization, and filtering are most often applied between the campus core and
enterprise edge.
C. Filtering only occurs on the routing domain boundary using redistribution.
D. Summarize routes at the core toward the distribution layer.
E. The hierarchical flexibility of IPv6 addressing avoids the requirement for routing traffic reduction using
aggregation.
Answer: B

NO.12 Which two statements about designing the Data Center Access layer are correct? (Choose two)
A. Multiport NIC servers should each have their own IP address
B. Layer 3 connectivity should never be used in the access layer
C. Layer 2 connectivity is primarily implemented in the access layer
D. Multiport NIC servers should never be used in the access layer
E. Layer 2 clustering implementation requires servers to be Layer 2 adjacent
Answer: CE

NO.13 According to Cisco, which four improvements are the main benefits of the PPDIOO lifecycle approach
to network design? (Choose four)
A. faster ROI
B. improved business agility
C. increased network availability
D. faster access to applications and services
E. lower total cost of network ownership
F. better implementation team engagement
Answer: BCDE

NO.14 Which one of these statements is true about addressing redundancy within the WAN environment?
A. The reliability and speed of DSL allow for cost savings by not including redundant links.
B. CAMDM and dark fiber offer advanced redundancy features such as automatic backup and repair
mechanism to cope system faults.
C. An SLA is one way to eliminate the need for redundancy.
D. The failure of a single SONET/SDH link or network element does not lead to failure of the entire
network.
Answer: D

NO.15 Which of these statements is true concerning the data center access layer design?
A. The access layer in the data center is typically built at Layer 3, which allows for better shaping of
services across multiple servers.
B. With Layer 2 access, the default gateway for the servers can be configured at the access or
aggregation layer.
C. A dual-homing NIC requires a VLAN or trunk between the two access switches to support the dual IP
address on the two server links to two separate switches.
D. The access layer is normally not required, as dual homing is standard from the servers to the
aggregation layer.
Answer: B