CCDP 642-874 (Designing Cisco Network Service Architectures)인증시험을 패스하고 자격증취득으로 하여 여러분의 인생은 많은 인생역전이 이루어질 것입니다. 회사, 생활에서는 물론 많은 업그레이드가 있을 것입니다. Pass4Test에서는  CCDP 642-874 (Designing Cisco Network Service Architectures) 인증시험관련가이드로 효과적으로  CCDP 642-874 (Designing Cisco Network Service Architectures) 시험을 패스하도록 도와드리겠습니다.Pass4Test의 부지런한  IT전문가들이 자기만의 지식과 끊임없는 노력과 경험으로   제작한 최고의  CCDP 642-874 (Designing Cisco Network Service Architectures)  학습자료로  CCDP 642-874 (Designing Cisco Network Service Architectures) 인증시험을 응시하실 수 있습니다.

 

 

NO.1 Which two of these are characteristics of MPLS VPNs? (Choose two)
A. Layer 3 MPLS VPNs can forward only IP packets
B. Layer 2 MPLS VPNs can forward any network protocol
C. MPL S label paths are automatically formed based on Layer 2 frames
D. Layer 3 MPLS VPNs can forward any network protocol based on Layer 2 frames
E. In Layer 2 MPLS VPNS, the service provider controls the customer Layer 3 policies
Answer: A,B

NO.2 In base e-Commerce module designs, where should firewall perimeters be placed?
A. core layer
B. Internet boundary
C. aggregation layer
D. aggregation and core layers
E. access and aggregation layers
Answer: A

NO.3 Which three routing protocols can minimize the number of routes advertised in the network? (Choose
three)
A. IGRP
B. RIPv2
C. OSPF
D. EIGRP
E. BGP
Answer: B,C,D

NO.4 Which of the following is true concerning best design practices at the switched Access layer of the
traditional layer2 Enterprise Campus Network?
A. Cisco NSF with SSO and redundant supervisors has the most impact on the campus in the Access
layer
B. Provides host-level redundancy by connecting each end device to 2 separate Access switches
C. Offer default gateway redundancy by using dual connections from Access switches to redundant
Distribution layer switches using a FHRP
D. Include a link between two Access switches to support summarization of routing information
Answer: A

NO.5 Which two statements are correct regarding Flex Links? (Choose two)
A. An interface can belong to multiple Flex Links.
B. Flex Links operate only over single pairs of links.
C. Flex Link pairs must be of the same interface type
D. Flex Links automatically disable STP so no BPDUs are propagated
E. Failover from active to standby on Flex Links takes less than a second
Answer: B,D

NO.6 As a critical part of the design for the Enterprise Campus network, which of the following two are true
concerning intrusion detection and prevention solution? (Choose two)
A. IDS is capable of both inline and promiscuous monitoring, while IPS is only capable of promiscuous
monitoring
B. IDS will stop malicious traffic from reaching its intended target for certain types of attacks.
C. IPS processes information on Layers 3 and 4 as well as analyzing the contents and payload of the
packets for more sophisticated embedded attacks (Layers 3 to 7)
D. IPS inspects traffic statefully and needs to see both sides of the connection to function properly
E. IDS placement at the perimeter of Data Center outside the firewall generates many warnings that have
relatively low value because no action is likely to be taken on this information
Answer: C,D

NO.7 Which virtualization technology allows multiple physical devices to be combined into a single logical
device?
A. device visualization
B. device clustering
C. server visualization
D. network visualization
Answer: B

NO.8 DRAG DROP
Drag the characteristic on the left the associated firewall deployment or topology on the right.
Answer:

NO.9 Which of these technologies is characterized as being a multipoint Layer 2 VPN that connects two or
more customer devices using Ethernet bridging techniques?
A. DPT
B. MPLS
C. VPLS
D. CWDM
E. DWDM
F. SONET/SDH
Answer: C

NO.10 Why is STP required when VLANs span access layer switches?
A. to ensure a loop-free topology
B. to protect against user-side loops
C. in order to support business applications
D. because of the risk of lost connectivity without STP
E. for the most deterministic and highly available network topology
Answer: B

NO.11 Which of these recommendations is most appropriate for the core layer in the Cisco Campus
Architecture?
A. Utilize Layer 3 switching
B. Utilize software accelerated services
C. Aggregate end users and support a feature-rich environment
D. Perform packet manipulation and filtering at the core layer
E. Use redundant point to-point Layer 2 interconnections when where is a link or node failure.
Answer: A

NO.12 Which of these Layer 2 access designs does not support VLAN extensions?
A. FlexLinks
B. loop-free U
C. looped square
D. looped triangle
Answer: B

NO.13 OSPF stub areas are an important tool for the Network designer; which of the following two should be
considered when utilizing OSPF stub areas? (Choose two)
A. OSPF stub areas increase the size of the LSDB with the addition of Type 3 and 5 LSAs
B. OSPF not so stubby areas are particularly useful as a simpler form of summarization
C. OSPF stub areas are always insulated from external changes
D. OSPF stub areas can distinguish among ASBRs for destinations that are external to the OSPF domain
E. OSPF totally stubby areas cannot distinguish among ABRs for the best route to destinations outside
the area
Answer: C,E

NO.14 Which three Layer 2 access designs have all of their uplinks in an active state? (Choose three.)
A. Flex Links
B. loop free U
C. looped square
D. looped triangle
E. loop-tree inverted U
Answer: B,C,E

NO.15 When an Enterprise Campus network designer is addressing the merger of two companies with
different IGPs, which of the following is considered a superior routing design?
A. Eliminate the management and support for redistribution by choosing and cutting over to a single IGP
at the time of merger
B. Maintain distinct pockets across a moving boundary of routing protocols, redistributing between them
C. Manipulate the administrative distance of the different IGPs to be equal throughout the network
D. Leave the IGPs independent without redistribution wherever communication between company entities
is not required
Answer: B

NO.16 Which technology is an example of the need for a designer to clearly define features and desired
performance when designing advanced WAN services with a service provider?
A. FHRP to remote branches.
B. Layer 3 MPLS VPNs secure routing
C. Control protocols (for example Spanning Tree Protocol) for a Layer 3 MPLS service.
D. Intrusion prevention, QoS, and stateful firewall support network wide.
Answer: B

NO.17 DRAG DROP
Drag the best practice recommendation for an Enterprise Campus network on the left to the technology to
which it most applies on the right.
Answer:

NO.18 How does ERS use the VLAN tag?
A. to provide service internetworking
B. to support transparency for Layer 2 frames
C. as a connection identifier to indicate destination
D. as a mapping to the DLCI in service internetworking
E. to provide a trunk by which all VLANs can navigate from one site to one or multiple sites
Answer: C

NO.19 There are 3 steps to confirm whether a range of IP address can be summarized. When of the following
is used in each of these 3 steps?
A. The first number in the contiguous block of addresses
B. The last number in the contiguous block of addresses
C. The size of the contiguous block of addresses
D. The subnet mask of the original network address
Answer: C

NO.20 DRAG DROP
Drag the characteristic on the left to the corresponding IPSec VPN solution on the right.
Answer:
 

 

CCDP 642-874 (Designing Cisco Network Service Architectures)인증시험은 IT업계에서의 비중은아주 큽니다. 시험 신청하시는 분들도 많아지고 또 많은 분들이 우리 Pass4Test의  CCDP 642-874 (Designing Cisco Network Service Architectures) 자료로 시험을 패스했습니다. 이미 패스한분들의 리뷰가 우리 Pass4Test의 제품의 중요함과 정확함을 증명할수 있습니다.