Cisco인증300-209기출문제준비를 하고 계시다면Pass4Test에서 출시한Cisco인증300-209기출문제를 제일 먼저 추천해드리고 싶습니다. Pass4Test제품은 여러분들이 제일 간편한 방법으로 시험에서 고득점을 받을수 있도록 도와드리는 시험동반자입니다. Cisco인증300-209기출문제패는Pass4Test제품으로 고고고!
시험 이름: Implementing Cisco Secure Mobility Solutions
당신이 구입하기 전에 시도, 100% 합격율 보장
100% 환불보장약속 300-209기출문제
PDF 및 소프트웨어, 연구와 실천
시험 이름: CCIE Security Exam (4.0)
당신이 구입하기 전에 시도, 100% 합격율 보장
100% 환불보장약속 350-018v4최신덤프
PDF 및 소프트웨어, 연구와 실천
Pass4Test에서 출시한 Cisco인증 350-018v4최신덤프는Cisco인증 350-018v4최신덤프에 대비하여 IT전문가들이 제작한 최신버전 공부자료로서 시험패스율이 100%입니다.Pass4Test는 고품질 Cisco인증 350-018v4최신덤프를 가장 친근한 가격으로 미래의 IT전문가들께 제공해드립니다. Pass4Test의 소원대로 멋진 IT전문가도 거듭나세요.
여러분이 우리Cisco 350-018v4최신덤프문제와 답을 체험하는 동시에 우리Pass4Test를 선택여부에 대하여 답이 나올 것입니다. 우리는 백프로 여러분들한테 편리함과 통과 율은 보장 드립니다. 여러분이 안전하게Cisco 350-018v4최신덤프을 패스할 수 있는 곳은 바로 Pass4Test입니다.
Pass4Test의 Cisco인증 300-209기출문제는 IT인사들의 많은 찬양을 받아왔습니다.이는Pass4Test의 Cisco인증 300-209기출문제가 신뢰성을 다시 한번 인증해주는것입니다. Cisco인증 300-209기출문제의 인기는 이 시험과목이 얼마나 중요한지를 증명해줍니다. Pass4Test의 Cisco인증 300-209기출문제로 이 중요한 IT인증시험을 준비하시면 우수한 성적으로 시험을 통과하여 인정받는 IT전문가로 될것입니다.
300-209 덤프무료샘플다운로드하기: http://www.pass4test.net/300-209.html
NO.1 Which technology does a multipoint GRE interface require to resolve
endpoints?
A. CEF
B. dynamic routing
C. NHRP
D. IPSec
E.
ESP
Answer: C
300-209 IT덤프
NO.2 You have
deployed new Cisco AnyConnect start before logon modules and set the
configuration
to download modules before logon, but all client connections
continue to use the previous version of
the module. Which action must you
take to correct the problem?
A. Configure a group policy to prompt the user
to download the updated module.
B. Define the modules for download in the
group policy.
C. Define the modules for download in the client profile.
D.
Configure start before logon in the client profile.
Answer: D
300-209자격증자료
NO.3
Scenario:
You are the senior network security administrator for your
organization. Recently and junior engineer
configured a site-to-site IPsec
VPN connection between your headquarters Cisco ASA and a remote
branch
office.
You are now tasked with verifying the IKEvl IPsec installation to
ensure it was properly configured
according to designated parameters. Using
the CLI on both the Cisco ASA and branch ISR, verify the
IPsec configuration
is properly configured between the two sites.
NOTE: the show running-config
command cannot be used for this exercise.
Topology:
What is being used as
the authentication method on the branch ISR?
A. Certifcates
B. RSA public
keys
C. Diffie-Hellman Group 2
D. Pre-shared keys
Answer:
D
300-209자격시험 300-209시험정보
Explanation:
The
show crypto isakmp key command shows the preshared key of "cisco".
NO.4
The Cisco AnyConnect client fails to connect via IKEv2 but works with SSL. The
following error
message is displayed:
"Login Denied, unauthorized
connection mechanism, contact your administrator"
What is the most possible
cause of this problem?
A. The AAA server that is being used does not
authorize IKEv2 as the connection mechanism.
B. The client endpoint does not
have the correct user profile to initiate an IKEv2 connection.
C. The
administrator is restricting access to this specific user.
D. DAP is
terminating the connection because IKEv2 is the protocol that is being
used.
E. The IKEv2 protocol is not enabled in the group policy of the VPN
headend.
Answer: E
300-209 IT국제자격증
NO.5 The
following configuration steps have been completeD.
WebVPN was enabled on the
ASA outside interface.
SSL VPN client software was loaded to the ASA.
A
DHCP scope was configured and applied to a WebVPN Tunnel Group.
What
additional step is required if the client software fails to load when connecting
to the ASA SSL
page?
A. The SSL client must be downloaded to the client
via FTP
B. The SSL client must be loaded to the client by an ASA
administrator
C. The SSL client must be enabled on the client machine before
loading
D. The SSL VPN client must be enabled on the ASA after
loading
Answer: D
NO.6 Which statement about the hub in a DMVPN
configuration with iBGP is true?
A. It must redistribute EIGRP from the
spokes.
B. It must be a route reflector.
C. It must be a route reflector
client.
D. It must be in a different AS.
Answer:
B
300-209자격증시험
NO.7 Refer to the
exhibit.
An administrator had the above configuration working with SSL
protocol, but as soon as the
administrator specified IPsec as the primary
protocol, the Cisco AnyConnect client was not able to
connect. What is the
problem?
A. The Cisco AnyConnect implementation does not allow the two group
URLs to be the same. SSL
does allow this.
B. If you specify the primary
protocol as IPsec, the User Group must be the exact name of the
connection
profile (tunnel group).
C. A new XML profile should be created instead of
modifying the existing profile, so that the clients
force the update.
D.
IPsec will not work in conjunction with a group URL.
Answer:
B
300-209자격증 300-209자료
NO.8
Refer to the exhibit.
You have implemented an SSL VPN as shown. Which type of
communication takes place between the
secure gateway R1 and the Cisco Secure
ACS?
A. AAA
B. HTTP proxy
C. port forwarding
D. policy
Answer:
A
300-209 PDF