연구결과에 의하면Cisco인증 100-101시험은 너무 어려워 시험패스율이 낮다고 합니다. Pass4Test의 Cisco인증 100-101덤프와 만나면Cisco인증 100-101시험에 두려움을 느끼지 않으셔도 됩니다. Pass4Test의 Cisco인증 100-101덤프는 엘리트한 IT전문가들이 실제시험을 연구하여 정리해둔 퍼펙트한 시험대비 공부자료입니다. 저희 덤프만 공부하시면 시간도 절약하고 가격도 친근하며 시험준비로 인한 여러방면의 스트레스를 적게 받아Cisco인증 100-101시험패스가 한결 쉬워집니다.
Pass4Test 에서 출시한 Cisco인증100-101시험덤프는 100%시험통과율을 보장해드립니다. 엘리트한 IT전문가들이 갖은 노력으로 연구제작한Cisco인증100-101덤프는 PDF버전과 소프트웨어버전 두가지 버전으로 되어있습니다. 구매전 PDF버전무료샘플로Pass4Test제품을 체험해보고 구매할수 있기에 신뢰하셔도 됩니다. 시험불합격시 불합격성적표로 덤프비용을 환불받을수 있기에 아무런 고민을 하지 않으셔도 괜찮습니다.
시험 번호/코드: 100-101시험 이름: CCNA Interconnecting Cisco Networking Devices 1 (ICND1)
당신이 구입하기 전에 시도, 100% 합격율 보장
100% 환불보장약속 100-101강좌
PDF 및 소프트웨어, 연구와 실천
Cisco 100-101인증시험에 응시하고 싶으시다면 좋은 학습자료와 학습 가이드가 필요합니다.Cisco 100-101시험은 it업계에서도 아주 중요한 인증입니다. 시험패스를 원하신다면 충분한 시험준비는 필수입니다.
Cisco인증100-101시험은 국제적으로 승인해주는 IT인증시험의 한과목입니다. 근 몇년간 IT인사들에게 최고의 인기를 누리고 있는 과목으로서 그 난이도 또한 높습니다. 자격증을 취득하여 직장에서 혹은 IT업계에서 자시만의 위치를 찾으련다면 자격증 취득이 필수입니다. Cisco인증100-101시험을 패스하고 싶은 분들은Pass4Test제품으로 가보세요.
NO.1 Which IOS command is used to initiate a login into a VTY port on a
remote router?
A. router# login
B. router# telnet
C. router#
trace
D. router# ping
E. router(config)# line vty 0 5
F.
router(config-line)# login
Answer: B
Cisco인증 100-101최신덤프 100-101 100-101
IT자격증시험
Explanation:
Explanation/Reference:
VTY ports are
telnet ports hence command B will initiate login to the telnet port.
NO.2
A switch has 48 ports and 4 VLANs. How many collision and broadcast domains
exist on the
switch (collision, broadcast)?
A. 4, 48
B. 48, 4
C. 48,
1
D. 1, 48
E. 4, 1
Answer:
B
Cisco덤프 100-101 100-101자격시험 100-101덤프다운 100-101교재
Explanation:
A
switch uses a separate collision domain for each port, and each VLAN is a
separate broadcast
domain.
NO.3 Which statement describes the process
ID that is used to run OSPF on a router?
A. It is globally significant and is
used to represent the AS number.
B. It is locally significant and is used to
identify an instance of the OSPF database.
C. It is globally significant and
is used to identify OSPF stub areas.
D. It is locally significant and must be
the same throughout an area.
Answer: B
Cisco
dump 100-101 100-101 100-101
Dump
NO.4 Which of the following describe the process identifier
that is used to run OSPF on a router?
(Choose two)
A. It is locally
significant.
B. It is globally significant.
C. It is needed to identify a
unique instance of an OSPF database.
D. It is an optional parameter required
only if multiple OSPF processes are running on the router.
E. All routers in
the same OSPF area must have the same process ID if they are to exchange
routing
information.
Answer: A,C
Cisco
pdf 100-101최신버전덤프 100-101인증 100-101
Explanation:
Explanation/Reference:
https://learningnetwork.cisco.com/thread/6248 They are locally
significant
only, and have no bearing on the structure of any OSPF packet or
LSA update. So you can have a
separate process-id on every single router in
your network if you so desire!
NO.5 Which statements describe the routing
protocol OSPF? (Choose three.)
A. It supports VLSM.
B. It is used to route
between autonomous systems.
C. It confines network instability to one area of
the network.
D. It increases routing overhead on the network.
E. It allows
extensive control of routing updates.
F. It is simpler to configure than RIP
v2.
Answer:
A,C,E
Cisco 100-101자격증덤프 100-101자격시험 100-101 100-101 100-101시험후기
NO.6 Refer
to the exhibit.
The junior network support staff provided the diagram as a
recommended configuration for the first
phase of a four-phase network
expansion project. The entire network expansion will have over 1000
users on
14 network segments and has been allocated this IP address space.
192.168.1.1
through 192.168.5.255
192.168.100.1 through 192.168.100.255
What are three
problems with this design? (Choose three.)
A. The AREA 1 IP address space is
inadequate for the number of users.
B. The AREA 3 IP address space is
inadequate for the number of users.
C. AREA 2 could use a mask of /25 to
conserve IP address space.
D. The network address space that is provided
requires a single network-wide mask.
E. The router-to-router connection is
wasting address space.
F. The broadcast domain in AREA 1 is too large for IP
to function.
Answer: A,C,E
Cisco
PDF 100-101자격시험 100-101 100-101
Explanation:
The
given IP addresses of areas 1 and 3 along with network masks of 24
cannot
accommodate 500 users so are inadequate, while the area 2 is having
over capacity so its
network mask can be reduced to 25 to accommodate the
only 60 users it has.
NO.7 Which two characteristics describe the access
layer of the hierarchical network design model?
(Choose two.)
A. layer 3
support
B. port security
C. redundant components
D. VLANs
E.
PoE
Answer:
B,D
Cisco최신덤프 100-101응시료 100-101후기 100-101
NO.8
A switch receives a frame on one of its ports. There is no entry in the MAC
address table for the
destination MAC address. What will the switch do with
the frame?
A. drop the frame
B. forward it out of all ports except the one
that received it
C. forward it out of all ports
D. store it until it
learns the correct port
Answer:
B
Cisco덤프다운 100-101
IT자격증시험자료 100-101 100-101