Pass4Test의  Microsoft 70-413 (Designing and Implementing a Server Infrastructure)  덤프는 수많은 시험준비 공부자료 중 가장 믿음직합니다. Pass4Test의 인지도는 업계에 널리 알려져 있습니다. Microsoft 70-413 (Designing and Implementing a Server Infrastructure) 덤프로  Microsoft 70-413 (Designing and Implementing a Server Infrastructure) 시험을 준비하여 한방에 시험패스한 분이 너무나도 많습니다. Microsoft 70-413 (Designing and Implementing a Server Infrastructure) 덤프는 실제  Microsoft 70-413 (Designing and Implementing a Server Infrastructure)시험문제에 초점을 맞추어 제작한 최신버전 덤프로서 시험패스율이 100%에 달합니다.

NO.1 Your company has a main office. The main office is located in a building that has 10 floors.
A datacenter on the ground floor contains a Windows Server 2012 failover cluster. The failover
cluster contains a DHCP server resource named DHCP1. All client computers receive their IP
addresses from DHCP1. All client computers are part of the 131.107.0.0/16 IPv4 subnet.
You plan to implement changes to the network subnets to include a separate subnet for each floor of
the office building. The subnets will connect by using routers.
You need to recommend changes to the DHCP infrastructure to ensure that all of the client
computers can receive their IP configuration by using DHCP.
What should you recommend?
More than one answer choice may achieve the goal. Select the BEST answer.
A. Install a remote access server on each floor. Configure a DHCP relay agent on each new DHCP
server. Create a scope for each subnet on DHCP1.
B. Install a DHCP server on each floor. Create a scope for the local subnet on each new DHCP server.
Enable DHCP Failover on each new DHCP server.
C. Configure each router to forward requests for IP addresses to DHCP1. Create a scope for each
subnet on DHCP1.
D. Configure each router to forward requests for IP addresses to DHCP1. Create a scope for the
10.0.0.0/16 subnet on DHCP1.
Answer: C

NO.2 You have a System Center 2012 R2 Virtual Machine Manager (VMM) infrastructure that
manages five Hyper-V hosts. The Hyper-V hosts are not clustered.
You have a virtual machine template that deploys a base image of Windows Server 2012 R2. No role
services or features are enabled in the base image.
You need to deploy a virtual machine named VM1 that is based on the virtual machine template.
VM1 will be deployed as part of a service. VM1 must have the Web Server (IIS) server role installed.
The solution must not require modifications to the virtual machine template or the base image.
What are two possible profile types that achieve the goal? Each correct answer presents a complete
solution.
A. Capability
B. Application
C. Guest OS
D. Hardware
E. Physical Computer
Answer: A,C

NO.3 Your network contains an Active Directory domain named contoso.com.
The domain contains an organizational unit (OU) named OU1.
You have a Group Policy object (GPO) named GPO1 that is linked to contoso.com. GPO1 contains
custom security settings.
You need to design a Group Policy strategy to meet the following requirements:
- The security settings in GPO1 must be applied to all client computers.
- Only GPO1 and other GPOs that are linked to OU1 must be applied to the client computers in OU1.
What should you include in the design?
More than one answer choice may achieve the goal. Select the BEST answer.
A. Enable the Block Inheritance option at the domain level. Enable the Enforced option on GPO1.
B. Enable the Block Inheritance option on OU1. Link GPO1 to OU1.
C. Enable the Block Inheritance option on OU1. Enable the Enforced option on all of the GPOs linked
to OU1.
D. Enable the Block Inheritance option on OU1. Enable the Enforced option on GPO1.
Answer: D

NO.4 Your network contains an Active Directory domain named contoso.com. The domain contains
three VLANs. The VLANs are configured as shown in the following table.
All client computers run either Windows 7 or Windows 8.
Goal: You need to implement a solution to ensure that only the client computers that have all of the
required security updates installed can connect to VLAN 1. The solution must ensure that all other
client computers connect to VLAN 3.
Solution: You implement the 802.1x Network Access Protection (NAP) enforcement method.
Does this meet the goal?
A. Yes
B. No
Answer: A

NO.5 You need to recommend a fault-tolerant solution for the VPN. The solution must meet the
technical requirements.
What should you include in the recommendation?
A. Network adapter teaming
B. Network Load Balancing (NLB)
C. Failover Clustering
D. DirectAccess
Answer: B

NO.6 Your company has three offices. The offices are located in New York, Chicago, and Atlanta.
The network contains an Active Directory domain named contoso.com that has three Active Directory
sites named Site1, Site2,and Site3. The New York office is located in Site1. The Chicago office is
located in Site2. The Atlanta office is located in Site3. There is a local IT staff to manage the servers in
each site. The current domain controllers are configured as shown in the following table.
The company plans to open a fourth office in Montreal that will have a corresponding Active
Directory site. Because of budget cuts, a local IT staff will not be established for the Montreal site.
The Montreal site has the following requirements:
- Users must be able to authenticate locally.
- Users must not have the ability to log on to the domain controllers.
- Domain account passwords must not be obtained from servers in the Montreal site.
- Network bandwidth between the Montreal site and the other sites must be minimized.
- Users in the Montreal office must have access to applications by using Remote Desktop Services
(RDS).
You need to recommend a solution for the servers in the Montreal site.
What should you recommend?
A. Only install a domain controller in the Montreal site that has a Server Core installation of Windows
Server 2012.
B. Install a read-only domain controller (RODC) in the New York site.
C. Install a read-only domain controller (RODC) in the Montreal site. Install a member server in the
New York site to host additional server roles.
D. Install a domain controller in the Montreal site that has a Server Core installation of Windows
Server 2012. Install a member server in the Montreal site to host additional server roles,
Answer: C

NO.7 Your network contains an Active Directory domain named contoso.com. The physical
topology of the network is configured as shown in the exhibit.
Each office contains 500 employees.
You plan to deploy several domain controllers to each office.
You need to recommend a site topology for the planned deployment.
What should you include in the recommendation?
More than one answer choice may achieve the goal. Select the BEST answer.
Exhibit
A. Five sites and one site link
B. Three sites and three site links
C. One site
D. Five sites and three site links
Answer: D

NO.8 Your network contains an Active Directory domain named contoso.com. All servers run
Windows Server 2008 R2. All domain controllers are installed on physical servers. The network
contains several Hyper-V hosts.
The network contains a Microsoft System Center 2012 infrastructure.
You plan to use domain controller cloning to deploy several domain controllers that will run Windows
Server 2012.
You need to recommend which changes must be made to the network infrastructure before you can
use domain controller cloning.
What should you recommend?
A. Upgrade a global catalog server to Windows Server 2012. Deploy Virtual Machine Manager
(VMM).
B. Upgrade a global catalog server to Windows Server 2012. Install the Windows Deployment Services
server role on a server that runs Windows Server 2012.
C. Upgrade the domain controller that has the PDC emulator operations master role to Windows
Server 2012. Deploy a Hyper-V host that runs Windows Server 2012.
D. Upgrade the domain controller that has the infrastructure master operations master role to
Windows Server 2012. Install the Windows Deployment Services server role on a server that runs
Windows Server 2012.
Answer: C