인테넷에 검색하면 Cisco 100-101 (CCNA Interconnecting Cisco Networking Devices 1 (ICND1)) 시험덤프공부자료가 헤아릴수 없을 정도로 많이 검색됩니다. 그중에서Pass4Test의 Cisco 100-101 (CCNA Interconnecting Cisco Networking Devices 1 (ICND1)) 제품이 인지도가 가장 높고 가장 안전하게 시험을 패스하도록 지름길이 되어드릴수 있습니다.
Interconnecting Cisco Networking Devices Part 1
| Exam Number | 100-101 ICND1 |
|---|---|
| Associated Certifications | CCENT CCNA Routing and Switching CCNA Security CCNA Service Provider Operations CCNA Voice CCNA Wireless |
| Duration | 90 Minutes (40-50 questions) |
| Available Languages | English, Japanese |
| Register | Pearson VUE |
| Exam Policies | Read current policies and requirements |
| Exam Tutorial |
The 100-101 Interconnecting Cisco Networking Devices Part 1 (ICND1) is the exam associated with the CCENT certification and a tangible first step in achieving the CCNA Routing and Switching certification. Candidates can prepare for this exam by taking the Interconnecting Cisco Networking Devices Part 1 (ICND1) course. This exam tests a candidate's knowledge and skills required to successfully install, operate, and troubleshoot a small branch office network. The exam includes topics on the Operation of IP Data Networks; LAN Switching Technologies; IP Addressing (IPv4 & IPv6); IP Routing Technologies; IP Services (DHCP, NAT, ACLs); Network Device Security; Basic Troubleshooting.
NO.1 Which two characteristics describe the access layer of the hierarchical
network design model?
(Choose two.)
A. layer 3 support
B. port
security
C. redundant components
D. VLANs
E. PoE
Answer:
B,D
NO.2 Which statements describe the routing protocol OSPF? (Choose
three.)
A. It supports VLSM.
B. It is used to route between autonomous
systems.
C. It confines network instability to one area of the network.
D.
It increases routing overhead on the network.
E. It allows extensive control
of routing updates.
F. It is simpler to configure than RIP v2.
Answer:
A,C,E
NO.3 A switch receives a frame on one of its ports. There is no
entry in the MAC address table for the
destination MAC address. What will the
switch do with the frame?
A. drop the frame
B. forward it out of all ports
except the one that received it
C. forward it out of all ports
D. store it
until it learns the correct port
Answer: B
NO.4 What information can
be used by a router running a link-state protocol to build and maintain
its
topological database? (Choose two.)
A. hello packets
B. SAP messages sent
by other routers
C. LSAs from other routers
D. beacons received on
point-to-point links
E. routing tables received from other link-state
routers
F. TTL packets from designated routers
Answer: A,C
NO.5
Which IOS command is used to initiate a login into a VTY port on a remote
router?
A. router# login
B. router# telnet
C. router# trace
D.
router# ping
E. router(config)# line vty 0 5
F. router(config-line)#
login
Answer: B
Explanation:
Explanation/Reference:
VTY ports are
telnet ports hence command B will initiate login to the telnet port.
NO.6
What is the purpose of assigning an IP address to a switch?
A. provides local
hosts with a default gateway address
B. allows remote management of the
switch
C. allows the switch to respond to ARP requests between two
hosts
D. ensures that hosts on the same LAN can communicate with each
other
Answer: B
NO.7 Refer to the output of the corporate router
routing table shown in the graphic.
The corporate router receives an IP
packet with a source IP address of 192.168.214.20 and a
destination address
of 192.168.22.3.
What will the router do with this packet?
A. It will
encapsulate the packet as Frame Relay and forward it out interface Serial
0/0.117.
B. It will discard the packet and send an ICMP Destination
Unreachable message out interface
FastEthernet 0/0.
C. It will forward the
packet out interface Serial 0/1 and send an ICMP Echo Reply message
out
interface serial 0/0.102.
D. It will change the IP packet to an ARP
frame and forward it out FastEthernet 0/0.
Answer: B
NO.8 Which
statements accurately describe CDP? (Choose three.)
A. CDP is an IEEE
standard protocol.
B. CDP is a Cisco proprietary protocol.
C. CDP is a
datalink layer protocol.
D. CDP is a network layer protocol.
E. CDP can
discover directly connected neighboring Cisco devices.
F. CDP can discover
Cisco devices that are not directly connected.
Answer:
B,C,E
Explanation:
CDP (Cisco Discovery Protocol) is a proprietary
protocol designed by Cisco to help administrators
collect information about
both locally attached and remote devices.
By using CDP, you can gather
hardware and protocol information about neighbor devices containing
useful
info for troubleshooting and documenting the network.