저희는 수많은 IT자격증시험에 도전해보려 하는 IT인사들께 편리를 가져다 드리기 위해 Citrix 1Y0-253 (Implementing Citrix NetScaler 10.5 for App and Desktop Solutions)실제시험 출제유형에 근거하여 가장 퍼펙트한 시험공부가이드를 출시하였습니다. 많은 사이트에서 판매하고 있는 시험자료보다 출중한 Pass4Test의 Citrix 1Y0-253 (Implementing Citrix NetScaler 10.5 for App and Desktop Solutions)덤프는 실제시험의 거의 모든 문제를 적중하여 고득점으로 시험에서 한방에 패스하도록 해드립니다. Citrix 1Y0-253 (Implementing Citrix NetScaler 10.5 for App and Desktop Solutions)시험은 Pass4Test제품으로 간편하게 도전해보시면 후회없을 것입니다.
NO.1 Scenario: After a restart of a single NetScaler, users complain that the
logon page has changed.
An administrator plans to verify that a startup
script exists and contains the necessary command.
Where can the administrator
find the startup script?
A. /etc
B. /dev
C. /nsconfig
D.
/netscaler
Answer: C
NO.2 Scenario: An administrator configures load
balancing in an environment to load balance a Web
server. The administrator
needs to enhance availability in the case that the virtual server goes
down.
Which two options could the administrator configure to meet the load
balancing needs for this
environment? (Choose two.)
A. Redirect URL
B.
Reverse monitoring
C. Backup virtual server
D. Content Switching virtual
server
Answer: A,C
NO.3 An administrator created a service for a Web
Interface server that is encrypted by an SSL
certificate.
Which command
should the administrator run at the command-line interface to create a
monitor
that will check the Web Interface by logging on to it with a test
user's credentials?
A. add lb monitor mon-WebInterface CITRIX-WI-EXTENDED
-sitePath "/Citrix/XenApp" userName user
-domain DomainName -password
P@ssw0rd -encrypted
B. add lb monitor mon-WebInterface CITRIX-WI-EXTENDED
-sitePath "/Citrix/XenApp" userName user
-domain DomainName -password
P@ssw0rd -secure YES
C. add lb monitor mon-WebInterface CITRIX-WI-EXTENDED
-sitePath "/Citrix/XenApp" userName user
-domain DomainName -password
P@ssw0rd -destPort 443
D. add lb monitor mon-WebInterface CITRIX-WI-EXTENDED
-sitePath "/Citrix/XenApp" userName user
-domain DomainName -password
P@ssw0rd -encrypted -secure YES
Answer: B
NO.4 Which two methods could
an administrator use to ensure that all HTTP traffic will be redirected
to
the NetScaler Gateway virtual server after configuring a NetScaler Gateway
virtual server? (Choose
two.)
A. Configure a URL transformation policy,
then bind it globally.
B. Configure a rewrite policy to change all the HTTP
requests, then bind it to the NetScaler Gateway
virtual server.
C.
Configure a responder policy based on the FQDN pointing to the NetScaler Gateway
virtual server,
then bind it globally.
D. Configure an HTTP virtual server
with the same NetScaler Gateway virtual server IP address, then
configure a
redirect URL on it.
Answer: C,D
NO.5 An administrator could generate a
trace file using the __________ and the __________.
(Choose the two correct
options to complete the sentence.)
A. "nstrace.sh" command at the NetScaler
shell
B. Diagnostics option in the Configuration Utility GUI
C. "start
nstrace" command at the command-line interface
D. "nstcpdump.sh" command at
the command-line interface
Answer: B,C
NO.6 Which two tasks must a
Citrix Administrator complete to enable Client Certificate
Authentication on
the NetScaler Gateway? (Choose two.)
A. Create a pre-authentication
policy.
B. Create an LDAP authentication policy.
C. Import the root
certificate onto the NetScaler Gateway.
D. Import all client certificates
onto the NetScaler Gateway.
E. Enable the Client Authentication option on the
virtual server.
Answer: C,E
NO.7 Which action could an administrator
take to configure auditing of logon events for all the
employees who
connected through the NetScaler Gateway for the current day?
A. Run "df -h"
from the NetScaler command-line interface.
B. Configure a Syslog policy to
send events to a remote server.
C. Run "cat aaa.debug" from the NetScaler
command-line interface.
D. Review logon events through Reporting > Access
Gateway > AAA > AAA Sessions.
Answer: B
NO.8 Scenario: An
administrator has configured three Web Interface sites. The sites are configured
to
fail over to another site if a site failure occurs. After a failure
occurs, the failing site is NOT available
for connections for one hour. The
administrator wants to lessen the amount of time that the failing
site is
unavailable.
What can an administrator do to lessen the amount of time the
site is unavailable?
A. Adjust the 'socket timeout' setting
B. Adjust the
'bypass any failed server' setting
C. Configure the 'disconnected session
timer' setting
D. Configure Health Monitoring and Recovery to restart the
server upon failure
Answer: B
logon page has changed.
An administrator plans to verify that a startup
script exists and contains the necessary command.
Where can the administrator
find the startup script?
A. /etc
B. /dev
C. /nsconfig
D.
/netscaler
Answer: C
NO.2 Scenario: An administrator configures load
balancing in an environment to load balance a Web
server. The administrator
needs to enhance availability in the case that the virtual server goes
down.
Which two options could the administrator configure to meet the load
balancing needs for this
environment? (Choose two.)
A. Redirect URL
B.
Reverse monitoring
C. Backup virtual server
D. Content Switching virtual
server
Answer: A,C
NO.3 An administrator created a service for a Web
Interface server that is encrypted by an SSL
certificate.
Which command
should the administrator run at the command-line interface to create a
monitor
that will check the Web Interface by logging on to it with a test
user's credentials?
A. add lb monitor mon-WebInterface CITRIX-WI-EXTENDED
-sitePath "/Citrix/XenApp" userName user
-domain DomainName -password
P@ssw0rd -encrypted
B. add lb monitor mon-WebInterface CITRIX-WI-EXTENDED
-sitePath "/Citrix/XenApp" userName user
-domain DomainName -password
P@ssw0rd -secure YES
C. add lb monitor mon-WebInterface CITRIX-WI-EXTENDED
-sitePath "/Citrix/XenApp" userName user
-domain DomainName -password
P@ssw0rd -destPort 443
D. add lb monitor mon-WebInterface CITRIX-WI-EXTENDED
-sitePath "/Citrix/XenApp" userName user
-domain DomainName -password
P@ssw0rd -encrypted -secure YES
Answer: B
NO.4 Which two methods could
an administrator use to ensure that all HTTP traffic will be redirected
to
the NetScaler Gateway virtual server after configuring a NetScaler Gateway
virtual server? (Choose
two.)
A. Configure a URL transformation policy,
then bind it globally.
B. Configure a rewrite policy to change all the HTTP
requests, then bind it to the NetScaler Gateway
virtual server.
C.
Configure a responder policy based on the FQDN pointing to the NetScaler Gateway
virtual server,
then bind it globally.
D. Configure an HTTP virtual server
with the same NetScaler Gateway virtual server IP address, then
configure a
redirect URL on it.
Answer: C,D
NO.5 An administrator could generate a
trace file using the __________ and the __________.
(Choose the two correct
options to complete the sentence.)
A. "nstrace.sh" command at the NetScaler
shell
B. Diagnostics option in the Configuration Utility GUI
C. "start
nstrace" command at the command-line interface
D. "nstcpdump.sh" command at
the command-line interface
Answer: B,C
NO.6 Which two tasks must a
Citrix Administrator complete to enable Client Certificate
Authentication on
the NetScaler Gateway? (Choose two.)
A. Create a pre-authentication
policy.
B. Create an LDAP authentication policy.
C. Import the root
certificate onto the NetScaler Gateway.
D. Import all client certificates
onto the NetScaler Gateway.
E. Enable the Client Authentication option on the
virtual server.
Answer: C,E
NO.7 Which action could an administrator
take to configure auditing of logon events for all the
employees who
connected through the NetScaler Gateway for the current day?
A. Run "df -h"
from the NetScaler command-line interface.
B. Configure a Syslog policy to
send events to a remote server.
C. Run "cat aaa.debug" from the NetScaler
command-line interface.
D. Review logon events through Reporting > Access
Gateway > AAA > AAA Sessions.
Answer: B
NO.8 Scenario: An
administrator has configured three Web Interface sites. The sites are configured
to
fail over to another site if a site failure occurs. After a failure
occurs, the failing site is NOT available
for connections for one hour. The
administrator wants to lessen the amount of time that the failing
site is
unavailable.
What can an administrator do to lessen the amount of time the
site is unavailable?
A. Adjust the 'socket timeout' setting
B. Adjust the
'bypass any failed server' setting
C. Configure the 'disconnected session
timer' setting
D. Configure Health Monitoring and Recovery to restart the
server upon failure
Answer: B