IBM 000-573 (IBM Tivoli Netcool/Impact V6.1 Implementation ) 시험을 패스하여 자격증을 취득한다면 여러분의 미래에 많은 도움이 될것입니다. IBM 000-573 (IBM Tivoli Netcool/Impact V6.1 Implementation )  시험 자격증은 it업계에서도 아주 인지도가 높고 또한 알아주는 시험이며 자격증 하나로도 취직은 문제없다고 볼만큼 가치가 있는 자격증이죠. IBM 000-573 (IBM Tivoli Netcool/Impact V6.1 Implementation )  시험은 여러분이 it지식 테스트 시험입니다.Pass4Test는  IBM 000-573 (IBM Tivoli Netcool/Impact V6.1 Impleme ntation )  시험에 대하여 응시가이드를 해줄 수 있는 사이트입니다. Pass4Test는 여러분의 전업 지식을 업그레이드 시켜줄 수 있고또한 한번에  IBM 000-573 (IBM Tivoli Netcool/Impact V6.1 Implementation )  시험을 패스하도록 도와주는 사이트입니다. Pass4 Test에서 제공하는 자료들은 모두 it업계 전문가들이 자신의 지식과 끊임없는 경험등으로 만들어낸 퍼펙트한 자료들입니다. 품질과정확도가  모두 보장되는 문제집입니다. IBM 000-573 (IBM Tivoli Netcool/Impact V6.1 Implementation )  시험은 여러분이 it지식을 한층 업할수 있는 시험이며 우리 또한 일년무료 업데이트 서비스를 제공합니다.Pass4Test를 선택함으로  여러분은  IBM 000-573 (IBM Tivoli Netcool/Impact V6.1 Implementation )   시험을 한방에 패스할 수 있습니다.만약 시험에서 실패하시면  Pass4Test에서는 덤프비용 전액환불을 약속합니다.

 

 

NO.1 In which folder are the IBM Tivoli Netcool/lmpact V6.1 service logs stored?
A. $NCHOME/logs
B. $IMPACT_HOME/log
C. $IMPACT_HOME/Iogs
D. $IMPACT_HOME/services/logs
Answer: C

NO.2 What is true about the LDAP DSA?
A. It does not support data saved in UTF-8 format.
B. It does not retrieve information from LDAPV2/V3.
C. It allows IBM Tivoli Netcool/lmpactto add, modify, or delete information managed by the LDAP server.
D. It does not allow IBM Tivoli Netcool/lmpactto add. modify, or delete information managed by the LDAP
server.
Answer: D

NO.3 Which tool will start a policy from the command line?
A. nci_crypt
B. nci_policy
C. nci_trigger
D. nci_import
Answer: C

NO.4 In order for IBM Tivoli Netcool/lmpact V6.1 to start using the ObjectServer for authentication, the server
must be configured so that it can map the roles that the application exposes to groups and/or users
managed in IBM Tivoli Netcool/OMNIbus. Which file must be edited for this purpose?
A. omnibus.conf
B. omnibususers
C. guiserver.setting
D. objectserver.conf
Answer: C

NO.5 What must occur before a data type can be defined?
A. Data Type service must be started
B. Policy Activator service is activated
C. Data Source definition is configured
D. ObjectServer Event Reader is activated
Answer: C

NO.6 A new Impact Server will be installed using the console mode of the installer application. Which
statement is true?
A. All default ports must be available.
B. The installer will not check if the required ports are available.
C. A starting point of ports can be selected if the default ports are not available.
D. The installer will adapt the required ports if some are tested as in use during the installation.
Answer: C

NO.7 What are two ways Data Source Adapters are used in IBM Tivoli Netcool/lmpact V6.1? (Choose two.)
A. to monitor Netcool/lmpact services
B. to communicate with external data sources
C. to extend the capabilities of Netcool/lmpact
D. to apply product fixes to the Netcool/lmpact Server
E. to start the policy logging service in Netcool/lmpact
Answer: B,C

NO.8 Which functional step should be completed when designing an IBM Tivoli Netcool/lmpact V6.1
solution?
A. write an enrichment policy
B. develop Netcool/lmpact startup scripts
C. test high availability and fail-over scenarios
D. determine methods of achieving customer requirements
Answer: D

NO.9 What must be done to receive an IBM Tivoli Netcool/OMNIbus event when a policy run raises any
unknown exception?
A. use the action function exceptionnameOand add policy code to insert the event between the brackets
B. use handle exceptionnameO in the policy and add policy code to insert the event between the brackets
C. create an ExceptionHandlerPolicy that inserts the event and define this in the Policytogger
configuration
D. configure the Self-Monitoring service to log exceptions into the ObjectServer defined in the service
configuration
Answer: C

NO.10 Which three IBM Tivoli Netcool/lmpact roles in Tivoli Integrated Portal can be used to control users
access to navigation pages in the GUI and to permit users to unlock their own files?
A. impactSuperUser. impactFullAccessUser, and impactOpViewUser
B. impactAdminUser, impactReadWriteUser, and impactOpViewUser
C. impactAdminUser, impactFullAccessUser, and impactOpViewUser
D. impactAdminUser, impactFullAccessUser, and impactReadOnlyUser
Answer: C

NO.11 On a server with only command line access, the server in an IBM Tivoli Netcool/lmpact cluster is
identified as acting as a primary server by using which command line utility?
A. nci_server
B. nci_trigger
C. nci_get_primary
D. nci_findendpoint
Answer: C

NO.12 What is the minimum memory requirement for installing a Tivoli Integrated Portal profile and an IBM
Tivoli Netcool/lrnpact profile running on the same physical machine?
A. 2 GB
B. 4 GB
C. 6 GB
D. 8 GB
Answer: C

NO.13 How is the name of the IBM Tivoli N etc oo I/Imp act Server Instance on the console identified?
A. check the IBM Installer utility litslll.sh to show the Impact Server Instance Names that have been set up
B. check the TIPProfile/logs/server1 directory - the SystemOutlog holds the Impact Service Instance
name
C. use the nci_server command line utility to show the Impact Server Instance Names that have been set
up
D. check the impact/etc directory - all Impact Server Instance-related files use the Instance Name in the
beginning of every file name
Answer: D

NO.14 Which component of IBM WebSphere is installed with IBM Tivoli Netcool/lmpact V6.1?
A. WebSphere MQ
B. WebSphere Portal Server
C. WebSphere Process Server
D. Embedded WebSphere Application Server
Answer: D

NO.15 Which command line function should be executed prior to applying a product fix or upgrading the IBM
Tivoli Netcool/lmpact Server as best practice.?
A. nci_crypt
B. nci_policy
C. nci_trigger
D. nci_export
Answer: D

NO.16 What is the purpose of a project in IBM Tivoli Netcool/lmpact V6.1?
A. It allows for creating subsets of the elements stored in the global repository.
B. It allows for creating subsets of the elements stored in the Impact repository.
C. It allows for creating subsets of the elements stored across cluster members.
D. It allows for creating supersets of the elements stored in the global repository.
Answer: A

NO.17 An IBM Tivoli Netcool/lmpact V6.1 system is configured to perform event enrichment by retrieving
ObjectServer events which have an empty Location field. Which Service Log can be used to verify that
Netcool/lmpact is selecting events from the ObjectServer based upon that condition?
A. the PolicyLogger service
B. the PolicyActivator service
C. the OMNIbusEventReader service
D. the OMNIbusEventListener service
Answer: C

NO.18 Which utility edits the installed GUI server deployment and maps the roles to the specified users?
A. roles.[bat|sh]
B. user-roles.[bat|sh]
C. update-impact-roles.[bat|sh]
D. impact-security-roles.[bat|sh]
Answer: C

NO.19 Which step is required to design an IBM Tivoli Netcool/lmpact V6.1 solution from stakeholder
requirements?
A. Determine if the correct Java version is installed.
B. Create an architecture and a raw functional design of policies.
C. Determine if enough disk space is provided on the installation servers.
D. Interview the operational staff to determine their most efficient way to resolve a problem
Answer: B

NO.20 Given only command line access, where is it verified that a newly started IBM Tivoli Netcool/lmpact
Server instance is registering itself as a slave or primary in a cluster?
A. in the server.log file
B. in the netcool.log file
C. in the systemOut.log file
D. using the nci_server utility
Answer: B