지금 사회에 능력자들은 아주 많습니다.it인재들도 더욱더 많아지고 있습니다.많은 it인사들은 모두 관연 it인증시험에 참가하여 자격증취득을 합니다.자기만의 자리를 확실히 지키고 더 높은 자리에 오르자면 필요한 스펙이니까요.Pass4Test는  여러분이 원하는 IBM 000-573 (IBM Tivoli Netcool/Impact V6.1 Implementation )  시험관련자료를 해결해드릴 수 있는 사이트입니다. Pass4Test의 제품들은 모두 우리만의 거대한 IT업계 엘리트들로 이루어진 그룹 즉 관련업계예서 권위가 있는 전문가들이 자기만의 지식과 지금까지의 경험으로 최고의IT인증 관련 자료를 만들어냅니다. Pass4Test의 문제와 답은 정확도 적중률이 아주 높습니다. 우리의 덤프로 완벽한  IBM 000-573 (IBM Tivoli Netcool/Impact V6.1 Implementation ) 시험대비를 하시면 됩니다. 이렇게 어려운 시험은 우리  IBM 000-573 (IBM Tivoli Netcool/I mpact V6.1 Implementation )  덤프로 여러분의 고민을 한방에 해결해 드립니다.Pass4Test는 아주 믿을 만하고 서비스 또한 만족스러운사이트입니다. 시험실패 시 우리는 100% 덤프비용 전액환불을 해드립니다.그리고 시험을 패스하여도 우리는 일 년 동안 무료업뎃을 제공합니다.

 

 

NO.1 Which functional step should be completed when designing an IBM Tivoli Netcool/lmpact V6.1
solution?
A. write an enrichment policy
B. develop Netcool/lmpact startup scripts
C. test high availability and fail-over scenarios
D. determine methods of achieving customer requirements
Answer: D

NO.2 A new Impact Server will be installed using the console mode of the installer application. Which
statement is true?
A. All default ports must be available.
B. The installer will not check if the required ports are available.
C. A starting point of ports can be selected if the default ports are not available.
D. The installer will adapt the required ports if some are tested as in use during the installation.
Answer: C

NO.3 Which command line function should be executed prior to applying a product fix or upgrading the IBM
Tivoli Netcool/lmpact Server as best practice.?
A. nci_crypt
B. nci_policy
C. nci_trigger
D. nci_export
Answer: D

NO.4 What must be done to receive an IBM Tivoli Netcool/OMNIbus event when a policy run raises any
unknown exception?
A. use the action function exceptionnameOand add policy code to insert the event between the brackets
B. use handle exceptionnameO in the policy and add policy code to insert the event between the brackets
C. create an ExceptionHandlerPolicy that inserts the event and define this in the Policytogger
configuration
D. configure the Self-Monitoring service to log exceptions into the ObjectServer defined in the service
configuration
Answer: C

NO.5 Given only command line access, where is it verified that a newly started IBM Tivoli Netcool/lmpact
Server instance is registering itself as a slave or primary in a cluster?
A. in the server.log file
B. in the netcool.log file
C. in the systemOut.log file
D. using the nci_server utility
Answer: B

NO.6 Which step is required to design an IBM Tivoli Netcool/lmpact V6.1 solution from stakeholder
requirements?
A. Determine if the correct Java version is installed.
B. Create an architecture and a raw functional design of policies.
C. Determine if enough disk space is provided on the installation servers.
D. Interview the operational staff to determine their most efficient way to resolve a problem
Answer: B

NO.7 Which three IBM Tivoli Netcool/lmpact roles in Tivoli Integrated Portal can be used to control users
access to navigation pages in the GUI and to permit users to unlock their own files?
A. impactSuperUser. impactFullAccessUser, and impactOpViewUser
B. impactAdminUser, impactReadWriteUser, and impactOpViewUser
C. impactAdminUser, impactFullAccessUser, and impactOpViewUser
D. impactAdminUser, impactFullAccessUser, and impactReadOnlyUser
Answer: C

NO.8 Which utility edits the installed GUI server deployment and maps the roles to the specified users?
A. roles.[bat|sh]
B. user-roles.[bat|sh]
C. update-impact-roles.[bat|sh]
D. impact-security-roles.[bat|sh]
Answer: C

NO.9 What is the minimum memory requirement for installing a Tivoli Integrated Portal profile and an IBM
Tivoli Netcool/lrnpact profile running on the same physical machine?
A. 2 GB
B. 4 GB
C. 6 GB
D. 8 GB
Answer: C

NO.10 What are two ways Data Source Adapters are used in IBM Tivoli Netcool/lmpact V6.1? (Choose two.)
A. to monitor Netcool/lmpact services
B. to communicate with external data sources
C. to extend the capabilities of Netcool/lmpact
D. to apply product fixes to the Netcool/lmpact Server
E. to start the policy logging service in Netcool/lmpact
Answer: B,C

NO.11 What must occur before a data type can be defined?
A. Data Type service must be started
B. Policy Activator service is activated
C. Data Source definition is configured
D. ObjectServer Event Reader is activated
Answer: C

NO.12 On a server with only command line access, the server in an IBM Tivoli Netcool/lmpact cluster is
identified as acting as a primary server by using which command line utility?
A. nci_server
B. nci_trigger
C. nci_get_primary
D. nci_findendpoint
Answer: C

NO.13 An IBM Tivoli Netcool/lmpact V6.1 system is configured to perform event enrichment by retrieving
ObjectServer events which have an empty Location field. Which Service Log can be used to verify that
Netcool/lmpact is selecting events from the ObjectServer based upon that condition?
A. the PolicyLogger service
B. the PolicyActivator service
C. the OMNIbusEventReader service
D. the OMNIbusEventListener service
Answer: C

NO.14 What is true about the LDAP DSA?
A. It does not support data saved in UTF-8 format.
B. It does not retrieve information from LDAPV2/V3.
C. It allows IBM Tivoli Netcool/lmpactto add, modify, or delete information managed by the LDAP server.
D. It does not allow IBM Tivoli Netcool/lmpactto add. modify, or delete information managed by the LDAP
server.
Answer: D

NO.15 Which tool will start a policy from the command line?
A. nci_crypt
B. nci_policy
C. nci_trigger
D. nci_import
Answer: C

NO.16 In order for IBM Tivoli Netcool/lmpact V6.1 to start using the ObjectServer for authentication, the server
must be configured so that it can map the roles that the application exposes to groups and/or users
managed in IBM Tivoli Netcool/OMNIbus. Which file must be edited for this purpose?
A. omnibus.conf
B. omnibususers
C. guiserver.setting
D. objectserver.conf
Answer: C

NO.17 In which folder are the IBM Tivoli Netcool/lmpact V6.1 service logs stored?
A. $NCHOME/logs
B. $IMPACT_HOME/log
C. $IMPACT_HOME/Iogs
D. $IMPACT_HOME/services/logs
Answer: C

NO.18 Which component of IBM WebSphere is installed with IBM Tivoli Netcool/lmpact V6.1?
A. WebSphere MQ
B. WebSphere Portal Server
C. WebSphere Process Server
D. Embedded WebSphere Application Server
Answer: D

NO.19 How is the name of the IBM Tivoli N etc oo I/Imp act Server Instance on the console identified?
A. check the IBM Installer utility litslll.sh to show the Impact Server Instance Names that have been set up
B. check the TIPProfile/logs/server1 directory - the SystemOutlog holds the Impact Service Instance
name
C. use the nci_server command line utility to show the Impact Server Instance Names that have been set
up
D. check the impact/etc directory - all Impact Server Instance-related files use the Instance Name in the
beginning of every file name
Answer: D

NO.20 What is the purpose of a project in IBM Tivoli Netcool/lmpact V6.1?
A. It allows for creating subsets of the elements stored in the global repository.
B. It allows for creating subsets of the elements stored in the Impact repository.
C. It allows for creating subsets of the elements stored across cluster members.
D. It allows for creating supersets of the elements stored in the global repository.
Answer: A