Pass4Test의 HP HP2-Z18 (Network Infrastructure AIS 2011) 덤프로 시험공부를 하신다면 고객님의 시간은 물론이고 거금을 들여 학원등록하지 않아도 되기에 금전상에서도 많은 절약을 해드리게 됩니다. HP HP2-Z18 (Network Infrastructure AIS 2011) 덤프 구매의향이 있으시면 무료샘플을 우선 체험해보세요.

NO.1 Port B1 on an HP ProCurve 5406zl switch is an untagged member of VLAN 155 and not a tagged
member of any VLAN. Port C1 is a tagged member of VLAN 155 and an untagged member of VLAN 100.
You issue the following command:
5406.l(config)# no vlan 155
Why do you receive the following prompt?
The following ports will be moved to the default VLAN:
B1
Do you want to continue? [y/n]:
A. The CLI always issues this prompt when deleting a VLAN.
B. The CLI will not allow you to orphan a port.
C. The CLI will not delete a VLAN with any port membership.
D. All ports must be moved to the default VLAN before you can delete the VLAN.
Answer: B

NO.2 When Spanning Tree Protocol is enabled, which devices receive outbound LLDP advertisements from
an HP E-Series switch?
A. those with interfaces in VLAN 1
B. those that receive the switch's broadcasts
C. those that are directly connected to the switch
D. those in the LLDP multicast group
E. those not blocked by Spanning Tree Protocol
Answer: C

NO.3 Which security technology requires that you set read/write community names?
A. SFTP
B. SSH
C. SNMP
D. HTTPS
E. SMTP
Answer: C

NO.4 You must determine whether routing has been enabled on an HP E 5406 zl switch. Which commands
provide this information? (Select two.)
A. show interfaces
B. show running-config
C. show vlans
D. show ip route
E. show ip
Answer: B, D

NO.5 Which remote management interface on an E-Series switch can be secured by enabling Secure
Sockets Layer (SSL)?
A. console
B. menu
C. web management
D. Telnet
Answer: C

NO.6 You make configuration changes to the running configuration of your HP E3500 yl switch. Which
command saves these changes to your startup configuration?
A. save running-config
B. copy running-config startup-config
C. write memory
D. write config
Answer: C

NO.7 You must enable Secure HTTP (HTTPS) to encrypt web-based management traffic on an HP E-Series
switch. The switch is at default settings. What must be installed or enabled to apply this solution?
A. web server
B. encryption accelerator
C. digital certificate
D. internal RADIUS server
Answer: A

NO.8 A customer requires that each management user of HP switches has a unique user name and
password. How can you fulfill this requirement on HP E-Series switches?
A. Add each switch to the customer's Active Directory domain.
B. Use an external RADIUS server for authentication.
C. Enable 802.1X port authentication on each managed switch.
D. Install a Premium License on each managed switch.
Answer: B

NO.9 You have configured a dynamic LACP four-port trunk connecting two HP E-Series switches. How will
the switches share the load over the trunk?
A. The switch that receives the first packet in each conversation will balance the load by ensuring reply
packets use a different link.
B. Each switch will assign conversations to links independent of the other switch's selection.
C. The switches will exchange LACP BPDUs to negotiate a load-sharing algorithm.
D. The switches will dynamically calculate the path of least congestion for each conversation.
Answer: D

NO.10 Ports 1-4 on an HP E3500 yl switch are tagged members of VLAN 44 and untagged members of VLAN
45. What is the effect of the following command?
E3500(config)# trunk 1-4 trk3 lacp
A. trk3 becomes a tagged member of VLAN 44 and an untagged member of VLAN 45.
B. trk3 will have no VLAN memberships until they are configured by an administrator.
C. trk3 becomes an untagged member of VLAN 1 and has no other VLAN memberships.
D. trk3 becomes an untagged member of VLAN 1 and a tagged member of VLAN 44.
Answer: C

NO.11 You must determine whether routing has been enabled on an HP E 5406 zl switch. Which commands
provide this information? (Select two.)
A. show interfaces
B. show running-config
C. show vlans
D. show ip route
E. show ip
Answer: B, E

NO.12 Which command entered at the CLI of an HP E3500 yl switch displays dynamic information about traffic
transmitted and received on each port?
A. E3500 yl# show interface traffic
B. E3500 yl# show interface all
C. E3500 yl# show interface display
D. E3500 yl# show interface dynamic
Answer: C

NO.13 You are at the manager level prompt in the CLI of an HP E3500 yl switch. Which options are available at
this prompt? (Select two.)
A. assign IP address to VLAN interface
B. enable IP routing
C. restart the switch
D. disable ports
E. update software
Answer: C, E

NO.14 You must update the software on an HP E3500 yl switch. Which devices can be sources for the copy
command? (Select two.)
A. USB flash drive
B. management workstation hard drive
C. TFTP server
D. FTP server
E. Compact Flash card
Answer: A, C

NO.15 Refer to the exhibit below.
You enter the following command at the switch ¯ s C L I
E5406(vlan-100)# no untag a24
Why does this command fail?
A. Port A24 is not a member of VLAN 100.
B. Port A24 must be a member of at least one VLAN.
C. VLAN 100 must have at least one port member.
D. no untag a24 is an invalid CLI command.
Answer: B