JNCIP JN0-633 (Security, Professional (JNCIP-SEC) Exam)시험패스 공부방법을 찾고 있다면 제일 먼저 Pass4Test를 추천해드리고 싶습니다.  JNCIP JN0-633 (Security, Professional (JNCIP-SEC) Exam) 시험이 많이 어렵다는것은 모두 알고 있는 것입니다. Pass4Test에서 출시한  JNCIP JN0-633 (Security, Professional (JNCIP-SEC) Exam) 덤프는 실제시험을 대비하여 연구제작된 멋진 작품으로서  JNCIP JN0-633 (Security, Professional (JNCIP-SEC) Exam)시험적중율이 최고입니다.  JNCIP JN0-633 (Security, Professional (JNCIP-SEC) Exam)시험패스를 원하신다면 Pass4Test의 제품이 고객님의  소원을 들어줄것입니다.

 

 

NO.1 HostA (1.1.1.1) is sending TCP traffic to HostB (2.2.2.2). You need to capture the TCP packets
locally on the SRX240. Which configuration would you use to enable this capture?
A. [edit security flow]
user@srx# show
traceoptions {
file dump;
flag basic-datapath;
}
B. [edit security]
user@srx# show
application-tracking {
enable;
}
flow {
traceoptions {
file dump;
flag basic-datapath;
}
}
C. [edit firewall filter capture term one]
user@srx# show
from {
source-address {
1.1.1.1;
}
destination-address {
2.2.2.2;
}
protocol tcp;
}
then {
port-mirror;
accept;
}
D. [edit firewall filter capture term one]
user@srx# show
from {
source-address {
1.1.1.1;
}
destination-address {
2.2.2.2;
}
protocol tcp;
}
then {
sample;
accept;
}
Answer: D

NO.2 Somebody has inadvertently configured several security policies with application firewall rule
sets
on an SRX device. These security policies are now dropping traffic that should be allowed. You
must find and remove the application firewall rule sets that are associated with these policies.
Which two commands allow you to view these associations? (Choose two.)
A. show security policies
B. show services application-identification application-system-cache
C. show security application-firewall rule-set all
D. show security policies application-firewall
Answer: A,D

NO.3 You are troubleshooting an SRX240 acting as a NAT translator for transit traffic. Traffic is
dropping
at the SRX240 in your network. Which three tools would you use to troubleshoot the issue?
(Choose three.)
A. security flow traceoptions
B. monitor interface traffic
C. show security flow session
D. monitor traffic interface
E. debug flow basic
Answer: A,B,C

NO.4 You are asked to establish a baseline for your company's network traffic to determine the
bandwidth usage per application. You want to undertake this task on the central SRX device that
connects all segments together. What are two ways to accomplish this goal? (Choose two.)
A. Configure a mirror port on the SRX device to capture all traffic on a data collection server for
further investigation.
B. Use interface packet counters for all permitted and denied traffic and calculate the values using
Junos scripts.
C. Send SNMP traps with bandwidth usage to a central SNMP server.
D. Enable AppTrack on the SRX device and configure a remote syslog server to receive AppTrack
messages.
Answer: A,D

NO.5 What is the default action for an SRX device in transparent mode to determine the outgoing
interface for an unknown destination MAC address?
A. Perform packet flooding.
B. Send an ARP query.
C. Send an ICMP packet with a TTL of 1.
D. Perform a traceroute request.
Answer: A

NO.6 Which problem is introduced by setting the terminal parameter on an IPS rule?
A. The SRX device will stop IDP processing for future sessions.
B. The SRX device might detect more false positives.
C. The SRX device will terminate the session in which the terminal rule detected the attack.
D. The SRX device might miss attacks.
Answer: D