NO.1 A cabling contractor is working at a customer facility.
The
contractor is asking what rating of cable should be installed in return-air
areas.
Which information can be referenced to provide the contractor the
requested information?
A. NEC Ratings
B. IEEE Standards
C. BICSI
TDDM
D. OSHA Codes
Answer: C
NO.2 A hospital environment was
designed to guarantee RF coverage at or better than -67 dBm in
the 5 GHz
spectrum.
The customer mandates that RRM be used for DCA and TPC in both
bands.
After deployment, why do many of the legacy 802.11b/g devices have
difficulty maintaining
connectivity?
A. TCP drastically increases Tx power
in the 2.4 GHz band.
B. TPC drastically reduces Tx power in the 2.4 GHz
band.
C. Excessive co-channel interference in the 2.4 GHz band exists.
D.
Excessive overlapping channels in the 2.4 GHz band exists.
Answer:
A
300-360덤프
NO.3 You
have a customer that is building a new campus of four 3-story buildings that you
have just
completed the site survey for. The customer is interested in the
mount of rack space they will need to
allocate in either the building MDF or
in the data center for controllers. Each building is going to
require 75 APs
to support voice and data. How should the controllers be deployed to provide
the
least number of controllers, the highest redundancy, and the easiest
management?
A. Use the centralized deployment method in the data center with
the N + 1 redundancy method
B. Use the distributed deployment method in each
building MDF with the N + 1 redundancy method.
C. Use the centralized
deployment method in the data center with the 1 + 1 redundancy method
and
clientSSO.
D. Use the centralized deployment method in the data center
with the N + N redundancy method.
E. Use the distributed deployment method in
each building MDF with the N + N redundancy method.
F. Use the distributed
deployment method in each building MDF with the N + N + 1
redundancy
method.
Answer: A
300-360 Dumps 300-360
IT국제자격증
NO.4 A customer has restricted the AP and antenna combinations
for a design to be limited to one
model integrated antenna AP for carpeted
spaces and one model external antenna AP, with high gain
antennas for
industrial, maintenance, or storage areas. When moving between a carpeted area
to an
industrial area, the engineer forgets to change survey devices and
surveys several APs. Which option
is the best to reduce the negative impact
of the design?
A. Resurvey and adjust the design.
B. Deploy unsurveyed
access points to the design.
C. Deploy the specified access points per area
type.
D. Increase the Tx power on incorrectly surveyed access
points.
Answer: A
300-360인증 300-360자격증자료
퍼펙트한Cisco 300-360교육대비덤프자료는 Pass4Test가 전문입니다. Cisco 300-360교육를 다운받아 가장 쉬운 시험준비를 하여 한방에 패스가는것입니다. 다같이 Cisco 300-360교육로 시험패스에 주문걸어 보아요. 마술처럼Cisco 300-360교육합격이 실현될것입니다.
요즘같이 시간인즉 금이라는 시대에 시간도 절약하고 빠른 시일 내에 학습할 수 있는 Pass4Test의 덤프를 추천합니다. 귀중한 시간절약은 물론이고 한번에Cisco 300-360교육을 패스함으로 여러분의 발전공간을 넓혀줍니다.
시험 번호/코드: 300-360시험 이름: Designing Cisco Wireless Enterprise Networks
당신이 구입하기 전에 시도, 100% 합격율 보장
100% 환불보장약속 300-360덤프다운
PDF 및 소프트웨어, 연구와 실천
Pass4Test 에서는 최신버전의 1z0-417시험에 대비한 고품질 덤프와 1z1-063시험 최신버전덤프를 제공해드립니다. Pass4Test의 070-412덤프의 VCE테스트프로그램과 C8010-726덤프는 한방에 시험을 패스하도록 도와드립니다. 최고품질 NS0-180시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.