Pass4Test의   Cisco Specialist 648-247덤프를 공부하시면 한방에 시험을 패스하는건 문제가 아닙니다. Pass4Test의   Cisco Specialist 648-247덤프는 시험적중율 최고의 인지도를 넓히 알리고 있습니다.저희가 제공한 시험예상문제로 시험에 도전해보지 않으실래요?  Cisco Specialist 648-247 프를 선택하시면 성공의 지름길이 눈앞에 다가옵니다.

 

 

NO.1 When a 24 VDC fail safe lock is being used to secure a door, how should power be supplied to the lock
from the control source?
A. connected +24 VDC directly to the lock
B. connected +24 VDC through common and normally close
C. connected +24 VDC through common and normally open
D. connected +5 VDC binary control signaling
Answer: B

NO.2 Refer to the exhibit.
One or more expansion modules is connected to the Cisco Access Gateway via a CAN bus. How should
the CAN bus wires be connected after the last module in the chain?
A. The CAN bus wires should be looped back to the Cisco Access Gateway.
B. The CAN bus wires should be twisted together and tucked away.
C. The CAN bus wires should be plugged into a Layer 2 Ethernet switch.
D. The CAN bus wires should be terminated with a high-impedance resistor.
Answer: D

NO.3 What are the four main components of a typical logical door?
A. door, door knob, door jam, and hinges
B. lock, reader, tailgate sensor, and motion detector
C. lock, request to exit, door position switch, and swing arm
D. lock, reader, request to exit, and door position switch
Answer: D

NO.4 What are the three common methods that are used for authentication with an access control system.?
A. badge card, key fob, and keypad PIN
B. badge card, keypad PIN, and password
C. something you know, something you have, and something you are
D. something you know, something you have, and something you did
Answer: C

NO.5 Cisco Physical Access Manager (Cisco PAM) is an appliance-based solution. The Cisco PAM 1.3.2
appliance is available on which of the following server platforms?
A. CIVS-MSP-1RU-K9
B. CPS-MSP-1RU-K9
C. CPS-MSP-2RU-K9
D. CIAC-PAME-1125-K9
Answer: B