우리 Pass4Test에서는 최고의 최신의 덤프자료를 제공 함으로 여러분을 도와    CCIE 350-050 (CCIE Wireless Beta Written Exam)  인증자격증을 쉽게 취득할 수 있게 해드립니다. 만약    CCIE 350-050 (CCIE Wireless Beta Written Exam)  인증시험으로 한층 업그레이드된 자신을 만나고 싶다면 우리 Pass4Test선택을 후회하지 않을 것입니다.Pass4 Test의 알맞춤 덤프들로 아주간단하고 편하게  인증시험을 패스할 수 있습니다.많은  it인증관연 응시자들은  우리Pass4Test가 제공하는 문제와 답으로 되어있는 덤프로 자격증을 취득하셨습니다.우리Pass4Test 또한 업계에서 아주 좋은 이미지를 가지고 있습니다.Pass4Test의 덤프들은 응시자에따라 ,시험 ,시험방법에 따라  알 맞춤한 퍼펙트한 자료입니다.여러분은 Pass4 Test의 알맞춤 덤프들로 아주 간단하고 편하게  인증시험을 패스할 수 있습니다.많은  it인증관연 응시자들은  우리 Pass4Test가 제공하는 문제와 답으로 되어있는 덤프로 자격증을 취득하셨습니다.우리Pass4Test 또한 업계에서 아주 좋은 이미지를 가지고 있습니다.Pass4Test의 문제와 답은 정확도적중률이 아주 높습니다. 우리의 덤프로 완벽한    CCIE 350-050 (CCIE Wireless Beta Written Exam)  시험대비를 하시면 됩니다. 이렇게 어려운 시험은 우리    CCIE 350-050 (CCIE Wireless Beta Written Exam)  덤프로 여러분의 고민을 한방에 해결해 드립니다.Pass4Test는 아주 믿을 만하고 서비스 또한 만족스러운 사이트입니다. 시험실패 시 우리는 100% 덤프비용 전액환불을 해드립니다.그리고 시험을 패스하여도 우리는 일 년 동안 무료업뎃을 제공합니다.

 

 

NO.1 You are a wireless network administrator for a company that has installed a network that is based on
Cisco WLC and uses Aironet 1140 Series APs. The clients are using the 2.4 GHz band and WPA TKIP for
Layer 2 security. The president of the company reads a news article on the benefits of 802.11n and wants
to deploy it at the office so that the company can use data rates of up to 150 Mb/s. What should you tell
the president?
A. You need to change your Layer 2 security policy to WPA2 AES to achieve the 300 Mb/s data rate.
B. You need to purchase different APs because the 1140 Series supports only up to 54 Mb/s.
C. You need to change the client Layer 2 security to WPA2 TKIP.
D. You need to change the client Layer 2 security to open.
E. 802.1n data rates are possible only on 5 GHz.
F. 802.11n data rates are possible with the current client Layer 2 security, but for a theoretical data rate of
300 Mb/s, you need to use channel bonding, which is not recommended on the 2.4 GHz band.
Answer: A

NO.2 Which three security threats require the Cisco Adaptive wIPS service for mitigation? (Choose three.)
A. on/off-channel rogue
B. spectrum intelligence
C. man-in-the-middle attack
D. rogue switch-port tracing
E. zero-day attack
F. network reconnaissance
Answer: C,E,F

NO.3 On AIR-CAP3500 Series APs, which AP mode allows you to intensively analyze the frequency
spectrum and detect interferers?
A. Sniffer
B. Monitor
C. SE-Connect
D. Analyzer
E. Rogue Detector
Answer: C

NO.4 Your site has already been surveyed at 5 GHz for 802.11n VoWLAN services. Which services can you
add safely, without conducting an additional site survey? (Choose two.)
A. enhanced Layer 2 or Layer 3 security of the WLAN
B. optional MFP client protection for Cisco Client Extensions Version 5 clients
C. 802.11n data services on the 2.4 GHz Frequency
D. 802.11n voice services on the 2.4 GHz Frequency
E. new services (such as location) on both frequencies
Answer: A,B

NO.5 Which environmental phenomena can cause considerable degradation to your wireless signals?
A. multipath, reflection, scattering, refraction
B. multipath, alpha particles, diversity, absorption
C. multipath, cosmic radiation, free path loss, scattering
D. multipath, convergence, refraction, gamma rays
Answer: A

NO.6 After interviewing the customer to understand its wireless client requirements, you determine that
802.11b must be enabled to support legacy clients within a mixed-mode environment. What
recommendation will have the greatest mitigation on the effects of 802.11b clients on the rest of the
network?
A. Restrict the use of OFDM modulation.
B. Make 11 Mb/s the lowest mandatory rate.
C. Enable a separate SSID for 802.11b clients.
D. Enable short preamble.
Answer: B

NO.7 Which of the below devices can cause unintentional RF jamming attacks against an 802.11 wireless
network? (Choose two.)
A. Rogue Access Point
B. Microwave oven
C. Radar
D. 900 MHz cordless phones
Answer: B,C

NO.8 You are designing an autonomous wireless network for an office building that is located near a local
airport. The customer requires the use of 802.11a/n clients only, and the APs must never change their
channel after they are configured. Which two UNII bands and channels should you restrict the APs to use
on the 5 GHz radios? (Choose two.)
A. UNII-1 and UNII-3
B. UNII-1 and UNII-2 extended
C. 36-52 and 149-161
D. 36-48 and 100-140
E. 52-64 and 149-161
F. 36-48 and 149-161
Answer: A,F

NO.9 Refer to exhibit.
Which type of RF signature does the exhibit illustrate on channel 1?
A. broadcast probe flood
B. video camera
C. Wi-Fi inverted
D. NULL probe response
E. none of the above
Answer: B

NO.10 Fill in the blanks. ____ is classified as an 802.11i RSN with _____ as the mandatory encryption
protocol.
A. WEP, TKIP
B. WPA2,TKIP
C. WPA, AES
D. WPA2, AES
Answer: D

NO.11 You are working for a South American services integrator. Your customer has a working unified Cisco
WLC solution in Costa Rica (-A domain). You need to integrate an office in Panama (-N domain); correct
APs are already deployed for this domain. Which approach do you take?
A. Do nothing. These APs will work on the same Cisco WLC because the countries are neighbors.
B. Change the APs in the Panama office to AIR-CAP3502E-N-K9, which have external antennae.
C. Use the config domain add -N command on the Cisco WLC.
D. Add the country code for Panama (PA) through the Cisco WLC web GUI.
Answer: D

NO.12 Which role does the Wi-Fi Alliance fulfill regarding WLANs?
A. creates global interoperability for wireless channels and spectrum
B. maintains and creates the protocol standards by which wireless devices work
C. ensures that wireless products that are available to consumers provide the features that the products
claim to have
D. creates strict regulations
Answer: C

NO.13 Which type of indoor Cisco AP should you deploy to make use of spatial multiplexing.?
A. AIR-LAP1242AG
B. AIR-BR1310G
C. AIR-LAP1131AG
D. AIR-LAP1252AG
E. AIR-LAP1524AG
Answer: D

NO.14 What does the letter P in the designation of the AIR-CAP3502P AP indicate?
A. The AP supports the new IEEE 802.11p (WAVE) wireless standard.
B. The AP requires professional installation.
C. The AP can be used in plenum applications.
D. The AP is compatible with polarization type antennae.
Answer: B

NO.15 Which of the following statements are true regarding RLDP? (Choose two)
A. RLDP works only on APs configured in Open Authentication mode.
B. RLDP only works if the AP is in Monitor Mode.
C. RLDP will attempt to identify each Rogue AP only once.
D. RLDP only works if the Rogue AP is connected to a VLAN that is reachable by the WLC.
E. RLDP only works if the AP is in Local Mode.
Answer: A,D

NO.16 You are converting your wireless infrastructure from a data-only design to a location services design.
Which task do you need to complete?
A. Disable the DSSS speeds for RFID compatibility.
B. Use fewer APs to avoid RFID 3D imaging.
C. Set APs to maximum power for RF fingerprinting.
D. Locate APs at the edges of your coverage area for trilateration.
Answer: D

NO.17 One of your customers is thinking of deploying wireless in a building. Which two items should you
establish in a pre-site survey? (Choose two.)
A. the exact channels that should be used
B. the agreed coverage areas for the design
C. the access security arrangements for getting into the building
D. the type of deployment (data-only service, voice service, or location services)
E. sources of RF interference
Answer: B,D

NO.18 Which of the following statements are not correct about Client Management Frame Protection (MFP)?
(Choose 2.)
A. Client MFP can replace Infrastructure MFP in case only CCXv5 clients are used.
B. Client MFP encrypts class 3 unicast management frames using the security mechanisms defined by
802.11i.
C. In order to use Client MFP the client must support CCXv5 and negotiate WPA2 with AESCCMP or
TKIP.
D. The only supported method to obtain the pre-user MFP encryption keys is EAP authentication.
E. CCXv5 client and access points must discard broadcast class 3 management frames.
Answer: A,D

NO.19 Which of the following are required components for Client MFP? (Choose two.)
A. CCXv4
B. CCXv5
C. 802.11n
D. WPA2 w/TKIP or AES-CCMP
E. AnyConnect 3.0
Answer: B,D

NO.20 Which statement about heat maps on Cisco WCS is true?
A. They are predictive and rely only on the accuracy of the information that is provided with the map.
B. They are based on real-time actual values if Cisco Compatible Extensions is enabled on the APs.
C. They are predictive but can be converted to real values by using the Refresh from network button.
D. They are based on real-time actual values because of fingerprinting.
Answer: A