Test information:
- Number of questions: 56
- Time allowed in minutes: 90
- Required passing score: 62%
- Languages: English
Related certifications:
- This multiple-choice test contains questions requiring single and multiple answers. For multiple-answer questions, you need to choose all required options to get the answer correct. You will be advised how many options make up the correct answer.
- This test is designed to provide diagnostic feedback on the Examination Score Report, correlating back to the test objectives, informing the test taker how he or she did on each section of the test. As a result, to maintain the integrity of each test, questions and answers are not distributed.
Pass4Test에서는 가장 최신이자 최고인 IBM Certified Application Developer C2050-725시험덤프를 제공해드려 여러분이 IT업계에서 더 순조롭게 나아가도록 최선을 다해드립니다. IBM Certified Application Developer C2050-725덤프는 최근 실제시험문제를 연구하여 제작한 제일 철저한 시험전 공부자료입니다.IBM Certified Application Developer C2050-725시험준비자료는 Pass4Test에서 마련하시면 기적같은 효과를 안겨드립니다.
NO.1 An application developer recently installed Fix Pack 8 to their Fix Pack 5 IBM WebSphere
Commerce Developer toolkit.
When the developer was in the process of executing the updateDB steps, they experienced a power
outage on their workstation several minutes after the scripts had been successfully running.
After rebooting their system, the developer continued their upgrade where they left off on the
updateDB steps, but the script failed immediately after it was started.
The following errors were observed in the logs: Upon researching the -612 error code, the following
information is provided:
"A non-unique name was specified where a unique name is required. Column names must be
uniquewithin an index, a table, or a view, and in the UPDATE OF clause of a trigger definition."
What is the most likely cause of this issue, and how should it be rectified?
A. The -612 error code indicates that configureDatabaseFixpack.xml contains duplicate database
commitment statements for the GEONODE table. The developer will need to restore
configureDatabaseFixpack.xml before they can continue with the updateDB script.
B. The -612 error code indicates that configureDatabaseFixpack.xml contains duplicate corrupt
entries. The developer will need to re-run the Fix Pack upgrade before they can rerun the updateDB
script.
C. The -612 error code indicates that the database changes have been committed via
configureDatabaseFixpack.xml to a duplicate GEONODE table. The developer will need to delete the
duplicate table and re-run the updateDB script.
D. The -612 error code indicates that the database change which updateDB is trying to perform has
already been successfully completed previously. The developer will need to restore the database and
re-run the updateDB script.
Answer: D
NO.2 The default side-by-side integration configuration of IBM WebSphere Commerce and IBM
Sterling Order Management supplies a manual adjustment apply policy, FixedReplacement to the
getOrderPrice API. A customer service representative can make a single adjustment against an order
for each of the three adjustment types: LineAdjustment, OrderAdjustment. orShipmentAdjustment.
To support the receipt of more than one order, line, or shipment manual adjustment, the application
developer has to perform a customization.
Which customization is applicable for a Order Level adjustment in IBM WebSphere Commerce?
A. Option A
B. Option B
C. Option C
D. Option D
Answer: B
NO.3 An application developer needs to add Web 2.0 features to the Consumer Direct store model.
This involves registering events that respond to AJAX calls. Which dojo function must be used to
register an event and the JavaScript function that triggers it?
A. dojo.listen(topic, context, method)
B. dojo.connect(topic, context, method)
C. dojo.subscribe(topic, context, method)
D. dojo.connectPublisher(topic, object, event)
Answer: D
NO.4 An application developer has created a Business Object Document (BOD) service module for the
Noun ExtendedAddress. In order to implement the Get operation, the application
developer has to obtain the physical object from the metadata (ExtendedAddressMetadata) class.
Which method in ExtendedAddressMetadata class needs to be modified to obtain the physical
object?
A. getMetadata()
B. getRootEClass()
C. getPhysicalObject()
D. getObjectRelationMetadata()
Answer: B
NO.5 A developer runs the foundation feature enablement script.
What should the developer do to ensure the script completed successfully?
A. Check enableFeature.log for errors related to feature enablement
B. Check enableWCfoundationFeature.log for errors related to feature enablement
C. Check systemOut.log for errors related to feature enablement
D. Check admin console for the status of available features
Answer: A
NO.6 A developer has created a new custom table that needs to be staged to production.
Which of the following activities needs to be performed in order to achieve this goal?
A. Add the custom table entry to the STAGLOG table, and create database triggers to record the
changes in the custom table to the STG tables (STGMERTAB, STGSITETAB or STGMRSTTAB)
B. Add the custom table entry to the STG tables (STGMERTAB, STGSITETAB or STGMRSTTAB) as
needed, and create database triggers to record the changes in the custom table to the STAGLOG
table
C. Modify stagingprop utility to add custom tables for stage propagation
D. Add the custom table entry to wc-stageprop.xml
Answer: D
NO.7 The business logic layer in WebSphere Commerce runtime is implemented using the command
pattern where application logic is specified independently from the presentation layer. Which
statement about the implemented commands for the business logic layer is correct?
A. Entity beans act as an interface between the business components and the database.
B. Task commands are used to implement application logic and should not be accessed by the
presentation layer.
C. View commands are invoked by the task commands and are used to compose a view as a response
to a client request.
D. Data bean commands are invoked by the data bean manager and are used to populate fields of a
data bean with data from a persistent object.
Answer: B
NO.8 An application developer needs to make a controller command available to AJAX requests.
What must be done?
A. Prefix the command URL in the JSP with AJAX.
B. Map the controller command to the AjaxAction in the struts configuration.
C. Change the controller command's mapping to com.ibm.commerce.struts.AjaxRequest.
D. Change the controller command's mapping to com.ibm.commerce.struts.AjaxService.
Answer: B
When the developer was in the process of executing the updateDB steps, they experienced a power
outage on their workstation several minutes after the scripts had been successfully running.
After rebooting their system, the developer continued their upgrade where they left off on the
updateDB steps, but the script failed immediately after it was started.
The following errors were observed in the logs: Upon researching the -612 error code, the following
information is provided:
"A non-unique name was specified where a unique name is required. Column names must be
uniquewithin an index, a table, or a view, and in the UPDATE OF clause of a trigger definition."
What is the most likely cause of this issue, and how should it be rectified?
A. The -612 error code indicates that configureDatabaseFixpack.xml contains duplicate database
commitment statements for the GEONODE table. The developer will need to restore
configureDatabaseFixpack.xml before they can continue with the updateDB script.
B. The -612 error code indicates that configureDatabaseFixpack.xml contains duplicate corrupt
entries. The developer will need to re-run the Fix Pack upgrade before they can rerun the updateDB
script.
C. The -612 error code indicates that the database changes have been committed via
configureDatabaseFixpack.xml to a duplicate GEONODE table. The developer will need to delete the
duplicate table and re-run the updateDB script.
D. The -612 error code indicates that the database change which updateDB is trying to perform has
already been successfully completed previously. The developer will need to restore the database and
re-run the updateDB script.
Answer: D
NO.2 The default side-by-side integration configuration of IBM WebSphere Commerce and IBM
Sterling Order Management supplies a manual adjustment apply policy, FixedReplacement to the
getOrderPrice API. A customer service representative can make a single adjustment against an order
for each of the three adjustment types: LineAdjustment, OrderAdjustment. orShipmentAdjustment.
To support the receipt of more than one order, line, or shipment manual adjustment, the application
developer has to perform a customization.
Which customization is applicable for a Order Level adjustment in IBM WebSphere Commerce?
A. Option A
B. Option B
C. Option C
D. Option D
Answer: B
NO.3 An application developer needs to add Web 2.0 features to the Consumer Direct store model.
This involves registering events that respond to AJAX calls. Which dojo function must be used to
register an event and the JavaScript function that triggers it?
A. dojo.listen(topic, context, method)
B. dojo.connect(topic, context, method)
C. dojo.subscribe(topic, context, method)
D. dojo.connectPublisher(topic, object, event)
Answer: D
NO.4 An application developer has created a Business Object Document (BOD) service module for the
Noun ExtendedAddress. In order to implement the Get operation, the application
developer has to obtain the physical object from the metadata (ExtendedAddressMetadata) class.
Which method in ExtendedAddressMetadata class needs to be modified to obtain the physical
object?
A. getMetadata()
B. getRootEClass()
C. getPhysicalObject()
D. getObjectRelationMetadata()
Answer: B
NO.5 A developer runs the foundation feature enablement script.
What should the developer do to ensure the script completed successfully?
A. Check enableFeature.log for errors related to feature enablement
B. Check enableWCfoundationFeature.log for errors related to feature enablement
C. Check systemOut.log for errors related to feature enablement
D. Check admin console for the status of available features
Answer: A
NO.6 A developer has created a new custom table that needs to be staged to production.
Which of the following activities needs to be performed in order to achieve this goal?
A. Add the custom table entry to the STAGLOG table, and create database triggers to record the
changes in the custom table to the STG tables (STGMERTAB, STGSITETAB or STGMRSTTAB)
B. Add the custom table entry to the STG tables (STGMERTAB, STGSITETAB or STGMRSTTAB) as
needed, and create database triggers to record the changes in the custom table to the STAGLOG
table
C. Modify stagingprop utility to add custom tables for stage propagation
D. Add the custom table entry to wc-stageprop.xml
Answer: D
NO.7 The business logic layer in WebSphere Commerce runtime is implemented using the command
pattern where application logic is specified independently from the presentation layer. Which
statement about the implemented commands for the business logic layer is correct?
A. Entity beans act as an interface between the business components and the database.
B. Task commands are used to implement application logic and should not be accessed by the
presentation layer.
C. View commands are invoked by the task commands and are used to compose a view as a response
to a client request.
D. Data bean commands are invoked by the data bean manager and are used to populate fields of a
data bean with data from a persistent object.
Answer: B
NO.8 An application developer needs to make a controller command available to AJAX requests.
What must be done?
A. Prefix the command URL in the JSP with AJAX.
B. Map the controller command to the AjaxAction in the struts configuration.
C. Change the controller command's mapping to com.ibm.commerce.struts.AjaxRequest.
D. Change the controller command's mapping to com.ibm.commerce.struts.AjaxService.
Answer: B