IT인증시험이 다가오는데 어느 부분부터 공부해야 할지 망설이고 있다구요? 가장 간편하고 시간을 절약하며 한방에 자격증을 취득할수 있는 최고의 방법을 추천해드립니다. 바로 우리 Pass4Test-----IT인증덤프제공사이트입니다. Pass4Test는 고품질 고적중율을 취지로 하여 여러분들인 한방에 시험에서 패스하도록 최선을 다하고 있습니다. Microsoft 70-412시험준비중이신 분들은 Pass4Test 에서 출시한 Microsoft 70-412덤프를 선택하세요.
NO.1 Your network contains an Active Directory domain named contoso.com. The
domain contains
two
servers named Server1 and Server2 that run Windows
Server 2012. Server1 has the DHCP Server
server role installed. Server2 has
the Hyper-V server role installed. Server2 has an IP address
of
192.168.10.50. Server1 has a scope named Scope1 for the 192.168.10.0/24
network. You plan to
deploy
20 virtual machines on Server2 that will be
connected to the external network. The MAC addresses
for the
virtual
machines will begin with 00-15-5D-83-03. You need to configure Server1 to offer
the virtual
machines IP addresses from 192.168.10.200 to 192.168.10.219.
Physical computers on the network
must
be offered IP addresses outside
this range. You want to achieve this goal by using the minimum
amount
of
administrative effort. What should you do from the DHCP console?
A. Delete
Scope1 and create two new scopes.
B. Configure Allow filters and Deny
filters.
C. Create a policy.
D. Create reservations.
Answer:
C
NO.2 Note: This question is part of a series of questions that use the
same or similar answer choices.
An
answer choice may be correct for more
than one question in the series. Each question is
independent of
the other
questions in this series. Information and details provided in a question apply
only to that
question. Your network contains an Active Directory domain named
contoso.com. The domain
contains
two member servers named Server1 and
Server2. All servers run Windows Server 2012. Server1
and
Server2 have the
Failover Clustering feature installed. The servers are configured as nodes in
a
failover
cluster named Cluster1. You add two additional nodes in
Cluster1. You have a folder named Folder1
on
Server1 that hosts
application data. Folder1 is a folder target in a Distributed File System
(DFS)
namespace. You need to provide highly available access to Folder1. The
solution must support DFS
Replication to Folder1. What should you
configure?
A. the cluster quorum settings
B. Affinity
Single
C. live
migration
D. the preferred owner
E. quick migration
F. the Scale-Out
File Server
G. Affinity
None
H. the possible owner
I. the Handling
priority
J. the host priority
K. a file server for general use
L. the
failover settings
Answer: K
NO.3 Note: This question is part of a
series of questions that use the same or similar answer choices.
An
answer
choice may be correct for more than one question in the series. Each question
is
independent of
the other questions in this series. Information and
details provided in a question apply only to that
question. Your network
contains an Active Directory domain named contoso.com. The
domain
contains
two member servers named Server1 and Server2. All servers
run Windows Server 2012. Server1
and
Server2 have the Failover Clustering
feature installed. The servers are configured as nodes in
a
failover
cluster named Cluster1. You add two additional nodes to
Cluster1. You need to ensure that Cluster1
stops
running if three nodes
fail. What should you configure?
A. the possible owner
B. a file server
for general use
C. live migration
D. the Handling priority
E. the
preferred owner
F. the cluster quorum settings
G. the host priority
H.
the Scale-Out File Server
I. the failover settings
J.
Affinity
Single
K. Affinity
None
L. quick migration
Answer:
F
NO.4 You have a datacenter that contains six servers. Each server has
the Hyper-V server role
installed and
runs Windows Server 2012. The
servers are configured as shown in the following table.
Host4 and Host5 are
part of a cluster named Cluster1. Cluster1 hosts a virtual machine named
VM1.
You
need to move VM1 to another Hyper-V host. The solution must
minimize the downtime of VM1. To
which
server and by which method should
you move VM1?
A. to Host6 by using a storage migration
B. to Host2 by
using a live migration
C. to Host3 by using a storage migration
D. to
Host1 by using a quick migration
Answer: C
NO.5 Your network contains
an Active Directory domain named contoso.com. A
previous
administrator
implemented a Proof of Concept installation of
Active Directory Rights Management Services (AD
RMS).
After the proof of
concept was complete, the Active Directory Rights Management Services
server
role
was removed. You attempt to deploy AD RMS. During the
configuration of AD RMS, you receive an
error
message indicating that an
existing AD RMS Service Connection Point (SCP) was found. You need to
remove
the existing AD RMS SCP . Which tool should you use?
A. ADSI Edit
B.
Active Directory Users and Computers
C. Active Directory Domains and
Trusts
D. Active Directory Sites and Services
E. Services
F.
Authorization Manager
G. TPM Management
H. Certification
Authority
Answer: AD
domain contains
two
servers named Server1 and Server2 that run Windows
Server 2012. Server1 has the DHCP Server
server role installed. Server2 has
the Hyper-V server role installed. Server2 has an IP address
of
192.168.10.50. Server1 has a scope named Scope1 for the 192.168.10.0/24
network. You plan to
deploy
20 virtual machines on Server2 that will be
connected to the external network. The MAC addresses
for the
virtual
machines will begin with 00-15-5D-83-03. You need to configure Server1 to offer
the virtual
machines IP addresses from 192.168.10.200 to 192.168.10.219.
Physical computers on the network
must
be offered IP addresses outside
this range. You want to achieve this goal by using the minimum
amount
of
administrative effort. What should you do from the DHCP console?
A. Delete
Scope1 and create two new scopes.
B. Configure Allow filters and Deny
filters.
C. Create a policy.
D. Create reservations.
Answer:
C
NO.2 Note: This question is part of a series of questions that use the
same or similar answer choices.
An
answer choice may be correct for more
than one question in the series. Each question is
independent of
the other
questions in this series. Information and details provided in a question apply
only to that
question. Your network contains an Active Directory domain named
contoso.com. The domain
contains
two member servers named Server1 and
Server2. All servers run Windows Server 2012. Server1
and
Server2 have the
Failover Clustering feature installed. The servers are configured as nodes in
a
failover
cluster named Cluster1. You add two additional nodes in
Cluster1. You have a folder named Folder1
on
Server1 that hosts
application data. Folder1 is a folder target in a Distributed File System
(DFS)
namespace. You need to provide highly available access to Folder1. The
solution must support DFS
Replication to Folder1. What should you
configure?
A. the cluster quorum settings
B. Affinity
Single
C. live
migration
D. the preferred owner
E. quick migration
F. the Scale-Out
File Server
G. Affinity
None
H. the possible owner
I. the Handling
priority
J. the host priority
K. a file server for general use
L. the
failover settings
Answer: K
NO.3 Note: This question is part of a
series of questions that use the same or similar answer choices.
An
answer
choice may be correct for more than one question in the series. Each question
is
independent of
the other questions in this series. Information and
details provided in a question apply only to that
question. Your network
contains an Active Directory domain named contoso.com. The
domain
contains
two member servers named Server1 and Server2. All servers
run Windows Server 2012. Server1
and
Server2 have the Failover Clustering
feature installed. The servers are configured as nodes in
a
failover
cluster named Cluster1. You add two additional nodes to
Cluster1. You need to ensure that Cluster1
stops
running if three nodes
fail. What should you configure?
A. the possible owner
B. a file server
for general use
C. live migration
D. the Handling priority
E. the
preferred owner
F. the cluster quorum settings
G. the host priority
H.
the Scale-Out File Server
I. the failover settings
J.
Affinity
Single
K. Affinity
None
L. quick migration
Answer:
F
NO.4 You have a datacenter that contains six servers. Each server has
the Hyper-V server role
installed and
runs Windows Server 2012. The
servers are configured as shown in the following table.
Host4 and Host5 are
part of a cluster named Cluster1. Cluster1 hosts a virtual machine named
VM1.
You
need to move VM1 to another Hyper-V host. The solution must
minimize the downtime of VM1. To
which
server and by which method should
you move VM1?
A. to Host6 by using a storage migration
B. to Host2 by
using a live migration
C. to Host3 by using a storage migration
D. to
Host1 by using a quick migration
Answer: C
NO.5 Your network contains
an Active Directory domain named contoso.com. A
previous
administrator
implemented a Proof of Concept installation of
Active Directory Rights Management Services (AD
RMS).
After the proof of
concept was complete, the Active Directory Rights Management Services
server
role
was removed. You attempt to deploy AD RMS. During the
configuration of AD RMS, you receive an
error
message indicating that an
existing AD RMS Service Connection Point (SCP) was found. You need to
remove
the existing AD RMS SCP . Which tool should you use?
A. ADSI Edit
B.
Active Directory Users and Computers
C. Active Directory Domains and
Trusts
D. Active Directory Sites and Services
E. Services
F.
Authorization Manager
G. TPM Management
H. Certification
Authority
Answer: AD