Pass4Test는 고객님의 IT자격증취득의 작은 소원을 이루어지게 도워드리는 IT인증시험덤프를 제공해드리는 전문적인 사이트입니다. Pass4Test 표 IBM Certified Solution Developer C2210-927시험덤프가 있으면 인증시험걱정을 버리셔도 됩니다. Pass4Test 표 IBM Certified Solution Developer C2210-927덤프는 시험출제 예상문제를 정리해둔 실제시험문제에 가장 가까운 IBM Certified Solution Developer C2210-927시험준비공부자료로서 공을 들이지않고도 시험패스가 가능합니다.
NO.1 Jonathan would like to document all his service provider models at once.
How can he
approach this task?
A. Add a Comment builder before each SQL
call.
B. Use the Service Definition builders in each one, generating comments
for each.
C. Use the WebApp Documentation builder, specifying Services as the
report parameter.
D. Use the Service Documentation Builder, specifying all
service models and the report type.
Answer: D
NO.2 Bob is wiring two
portlets and intends to implement partial page refresh. Each of the
following
is a correct approach except which one?
A. Do nothing because
Smart Refresh is the default.
B. Use JavaScript.
C. Use the property
broker and check the AJAX call option on the property broker for the
IBM
WebSphere Portal.
D. Use the Event Declaration builder with
client-side delivery and the Client Event Handler builder.
Answer:
C
NO.3 Heinrich has 35 builder calls in a model. If he wants to see the
XML relevant to one specific
builder call in the model, how should he find
it?
A. Right-click the builder call and select View XML.
B. Open the Model
XML model view, then search for the builder call by its ID name.
C. Open the
Builder Call Editor model view, and click Generate XML at the bottom.
D. Open
the Model XML model view, then click the builder call in the builder call
list.
Answer: D
NO.4 Page automation is a set of builders that
facilitate the automatic display of data based on
metadata. What are the
basic steps of page automation?
A. Receive data in a Data Page builder,
examine the data, enrich the data.
B. Receive data in a Data page builder,
modify the schema, apply modifiers.
C. Set up a data provider model, create a
consumer model, select the highest level page automation
builder that fits
the requirement, customize the generated UI to the requirements.
D. Examine
received data in the context of a View and Form builder, build a presentation
for the
data, document the schema.
Answer: C
NO.5 Which one of the
following is true about the difference between the Action List builder
and
the Method builder?
A. The Action List builder is recommended over the
Method builder. In addition to using the chooser
to make a variable
assignment or execute a service call, the Action List builder supports using
the
picker to add programming constructs to the Action List, including
conditionals and looping.
B. The Action List builder allows if/else
conditionals, but does not support adding looping constructs
such as "for"
loops and "while" loops. The Method builder allows the user to add looping
logic.
C. The Method builder conveniently allows the user to drag and drop
programming language
constructs from the palette, which are converted into
Java code. The palette cannot be used with
the Action List builder.
D. The
Method builder can return a value, but the Action List builder
cannot.
Answer: B
NO.6 Paul has been working on a project that is
being deployed in two different versions of IBM
WebSphere Portal at his
company. As a result, he needs to be able to test his code with
both
runtimes. How does he switch from one runtime to another?
A.
Right-click on the module in the Project Explorer view and click Properties >
Project Facets.
The Project Facets page opens. Select the Runtimes tab. Under
the Runtimes table, select the target
servers for the module.
B. Open the
.bowstreet file for the project and modify the runtimes element to include the
new
WebSphere Portal version.
C. Open web.xml and add a new runtime
element under server runtime for the new WebSphere
Portal version.
D.
Create a new server configuration for the project and assign it as the default
for the project.
Answer: A
NO.7 Ming has created a form using a Input
Form builder that has 16 fields to complete, but all are
very small. He wants
to organize the fields in two columns on the page. How can he
easily
accomplish this task?
A. Use a News Columns builder and enter 2 in
the number of columns.
B. Edit the HTML template to form two columns with the
DataEntryField element.
C. Modify the default Input Form base page to
organize the fields into two columns..
D. Drop a Layout Column from the
palette onto the group element in the Design view. Drag to
arrange the fields
as desired.
Answer: D
NO.8 Christine needs to make an AJAX call to a
method named "getAddress" in her model. How
would she get the URL to the
method in a Client JavaScript builder?
A.
<%=webAppAccess.getBackchannelURL("getAddress", false)%>
B.
<%=webAppAccess.getBackchannelActionURL("getAddress", false)%>
C.
<%=webAppAccess.getActionURL("getAddress", false)%>
D.
<%=webAppAccess.getAjaxURL("getAddress", false)%>
Answer: B
How can he
approach this task?
A. Add a Comment builder before each SQL
call.
B. Use the Service Definition builders in each one, generating comments
for each.
C. Use the WebApp Documentation builder, specifying Services as the
report parameter.
D. Use the Service Documentation Builder, specifying all
service models and the report type.
Answer: D
NO.2 Bob is wiring two
portlets and intends to implement partial page refresh. Each of the
following
is a correct approach except which one?
A. Do nothing because
Smart Refresh is the default.
B. Use JavaScript.
C. Use the property
broker and check the AJAX call option on the property broker for the
IBM
WebSphere Portal.
D. Use the Event Declaration builder with
client-side delivery and the Client Event Handler builder.
Answer:
C
NO.3 Heinrich has 35 builder calls in a model. If he wants to see the
XML relevant to one specific
builder call in the model, how should he find
it?
A. Right-click the builder call and select View XML.
B. Open the Model
XML model view, then search for the builder call by its ID name.
C. Open the
Builder Call Editor model view, and click Generate XML at the bottom.
D. Open
the Model XML model view, then click the builder call in the builder call
list.
Answer: D
NO.4 Page automation is a set of builders that
facilitate the automatic display of data based on
metadata. What are the
basic steps of page automation?
A. Receive data in a Data Page builder,
examine the data, enrich the data.
B. Receive data in a Data page builder,
modify the schema, apply modifiers.
C. Set up a data provider model, create a
consumer model, select the highest level page automation
builder that fits
the requirement, customize the generated UI to the requirements.
D. Examine
received data in the context of a View and Form builder, build a presentation
for the
data, document the schema.
Answer: C
NO.5 Which one of the
following is true about the difference between the Action List builder
and
the Method builder?
A. The Action List builder is recommended over the
Method builder. In addition to using the chooser
to make a variable
assignment or execute a service call, the Action List builder supports using
the
picker to add programming constructs to the Action List, including
conditionals and looping.
B. The Action List builder allows if/else
conditionals, but does not support adding looping constructs
such as "for"
loops and "while" loops. The Method builder allows the user to add looping
logic.
C. The Method builder conveniently allows the user to drag and drop
programming language
constructs from the palette, which are converted into
Java code. The palette cannot be used with
the Action List builder.
D. The
Method builder can return a value, but the Action List builder
cannot.
Answer: B
NO.6 Paul has been working on a project that is
being deployed in two different versions of IBM
WebSphere Portal at his
company. As a result, he needs to be able to test his code with
both
runtimes. How does he switch from one runtime to another?
A.
Right-click on the module in the Project Explorer view and click Properties >
Project Facets.
The Project Facets page opens. Select the Runtimes tab. Under
the Runtimes table, select the target
servers for the module.
B. Open the
.bowstreet file for the project and modify the runtimes element to include the
new
WebSphere Portal version.
C. Open web.xml and add a new runtime
element under server runtime for the new WebSphere
Portal version.
D.
Create a new server configuration for the project and assign it as the default
for the project.
Answer: A
NO.7 Ming has created a form using a Input
Form builder that has 16 fields to complete, but all are
very small. He wants
to organize the fields in two columns on the page. How can he
easily
accomplish this task?
A. Use a News Columns builder and enter 2 in
the number of columns.
B. Edit the HTML template to form two columns with the
DataEntryField element.
C. Modify the default Input Form base page to
organize the fields into two columns..
D. Drop a Layout Column from the
palette onto the group element in the Design view. Drag to
arrange the fields
as desired.
Answer: D
NO.8 Christine needs to make an AJAX call to a
method named "getAddress" in her model. How
would she get the URL to the
method in a Client JavaScript builder?
A.
<%=webAppAccess.getBackchannelURL("getAddress", false)%>
B.
<%=webAppAccess.getBackchannelActionURL("getAddress", false)%>
C.
<%=webAppAccess.getActionURL("getAddress", false)%>
D.
<%=webAppAccess.getAjaxURL("getAddress", false)%>
Answer: B