The Deploying Citrix XenDesktop 7 Solutions exam is divided into the
following sections:
-Installing Required Technologies
-Configuring
Technical Components
-Testing Configurations
The 300 exam was developed to measure the minimum knowledge and skills required to deploy an enterprise environment consisting of Citrix XenDesktop 7 running on Windows Server 2012. Passing this exam means a candidate demonstrated the minimum level of knowledge and skills required to build, test, and roll out enterprise environments consisting of Citrix XenDesktop 7 running on Windows Server 2012.
The 300 exam is a 64-question exam written in English. The exam consists of 57 multiple choice items and 7 simulation items. Some items on this exam are unscored.
The passing score for this exam is 66%.
Pass4Test의 Citrix 1Y0-300 (Deploying Citrix XenDesktop 7 Solutions) 시험덤프공부자료는 pdf버전과 소프트웨어버전 두가지 버전으로 제공되는데 Citrix 1Y0-300 (Deploying Citrix XenDesktop 7 Solutions) 실제시험예상문제가 포함되어있습니다.덤프의 예상문제는 Citrix 1Y0-300 (Deploying Citrix XenDesktop 7 Solutions) 실제시험의 대부분 문제를 적중하여 높은 통과율과 점유율을 자랑하고 있습니다. Pass4Test의 Citrix 1Y0-300 (Deploying Citrix XenDesktop 7 Solutions) 덤프를 선택하시면 IT자격증 취득에 더할것 없는 힘이 될것입니다.
NO.1 Which two steps should a Citrix Engineer perform to confirm that SSL is
configured correctly on
the IIS server for Citrix Director? (Choose
two.)
A. Set UI.EnableSslCheck to true in IIS under application settings.
B. Set UI.EnableSslCheck to false in IIS under application settings.
C. Verify that the SSL certificate is bound to the application pool in the IIS management console.
D. Verify that the SSL certificate is bound to the Citrix Director Site in the IIS management console.
Answer: A,D
NO.2 Scenario: A Citrix Engineer must use Provisioning Services to provision 50 desktop OS machines.
The engineer has installed and configured two Provisioning Services servers to guarantee high
availability and now needs to configure the write cache location of the virtual desktops so that
failover is possible in case one of the Provisioning Services servers fails.
Which three write cache locations could the engineer choose? (Choose three.)
A. In the RAM of the virtual desktop
B. On a Citrix ShareFile storage zone
C. On a persistent disk attached to the virtual desktop
D. On the local disk of both Provisioning Services servers
E. On a fileshare connected to both Provisioning Services servers
Answer: A,C,E
NO.3 Scenario: A Citrix Engineer needs to deploy NetScaler to an existing Citrix StoreFront
environment to provide virtual desktop access to the branch office users. Active Directory, along with
RSA tokens, will be used for authentication on the NetScaler.
Which two authentication servers should the engineer configure on the NetScaler? (Choose two.)
A. Local
B. LDAP
C. RADIUS
D. TACACS
Answer: B,C
NO.4 Scenario: The management staff at CCH require dedicated desktops, which they must be able to
customize. Additionally, the emergency response staff require access to hosted applications, which
will run from shared servers.
How should a Citrix Engineer configure the catalog(s) and Delivery Group(s)?
A. Create one machine catalog containing Windows servers and desktops. Create one Delivery Group
to assign servers and desktops.
B. Create two machine catalogs, one for Windows servers and one for Windows desktops. Create one
Delivery Group to assign servers and desktops.
C. Create two machine catalogs, one for Windows servers and one for Windows desktops. Create two
Delivery Groups, assigning desktops from one and servers from the other.
D. Create one machine catalog containing Windows servers and desktops. Create two Delivery
Groups based on the catalog, assigning servers to one Delivery Group and desktops to the other.
Answer: C
NO.5 Scenario: A Citrix Engineer installs Receiver on the virtual desktops by using the command line
/includeSSON. Additionally, the engineer enables the Citrix StoreFront store for pass-through
authentication. However, when testing the experience, the engineer is still prompted to log on to
Receiver.
Which step should the engineer have taken to activate single sign-on?
A. Enable pass-through using the icaclient.adm template.
B. Execute the ssonsrv.exe application on each virtual desktop.
C. Rename CDViewer.exe in the Receiver installation directory.
D. Set the Citrix Desktop Service to start automatically at logon.
Answer: A
NO.6 A Citrix Engineer needs to migrate virtual machines from Machine Creation Services to
Provisioning Services. What should the engineer do before installing the Provisioning Services Target
Device software on the master image?
A. Uninstall the Virtual Delivery Agent software on the master image.
B. Disable any anti-virus software and the firewall on the master image.
C. Configure a static IP address on the master image and flush the DNS cache.
D. Change the startup type for the Citrix Desktop Service to manual and stop the service.
Answer: D
NO.7 Four Delivery Groups are configured in the CCH environment.
What is the minimum required Citrix role permission for shadowing user sessions in the pooled
desktop Delivery Group?
A. Full Administrator
B. Help Desk Administrator
C. Read-Only Administrator
D. Delivery Group Administrator
Answer: B
NO.8 A Citrix Engineer needs to configure a XenDesktop Site; however, the engineer does NOT have
permissions to access the SQL Server and the SQL database.
What should the engineer do to configure the new Site?
A. Use an Access database instead of a SQL database.
B. Use the local administrator account for the Delivery Controller.
C. Ask a database administrator to enable mixed-mode authentication on the SQL database server
and relaunch the Site configuration wizard.
D. Generate a SQL database script during the creation of the Site and ask a database administrator to
run the script directly on the database designated for the new Site.
Answer: B
A. Set UI.EnableSslCheck to true in IIS under application settings.
B. Set UI.EnableSslCheck to false in IIS under application settings.
C. Verify that the SSL certificate is bound to the application pool in the IIS management console.
D. Verify that the SSL certificate is bound to the Citrix Director Site in the IIS management console.
Answer: A,D
NO.2 Scenario: A Citrix Engineer must use Provisioning Services to provision 50 desktop OS machines.
The engineer has installed and configured two Provisioning Services servers to guarantee high
availability and now needs to configure the write cache location of the virtual desktops so that
failover is possible in case one of the Provisioning Services servers fails.
Which three write cache locations could the engineer choose? (Choose three.)
A. In the RAM of the virtual desktop
B. On a Citrix ShareFile storage zone
C. On a persistent disk attached to the virtual desktop
D. On the local disk of both Provisioning Services servers
E. On a fileshare connected to both Provisioning Services servers
Answer: A,C,E
NO.3 Scenario: A Citrix Engineer needs to deploy NetScaler to an existing Citrix StoreFront
environment to provide virtual desktop access to the branch office users. Active Directory, along with
RSA tokens, will be used for authentication on the NetScaler.
Which two authentication servers should the engineer configure on the NetScaler? (Choose two.)
A. Local
B. LDAP
C. RADIUS
D. TACACS
Answer: B,C
NO.4 Scenario: The management staff at CCH require dedicated desktops, which they must be able to
customize. Additionally, the emergency response staff require access to hosted applications, which
will run from shared servers.
How should a Citrix Engineer configure the catalog(s) and Delivery Group(s)?
A. Create one machine catalog containing Windows servers and desktops. Create one Delivery Group
to assign servers and desktops.
B. Create two machine catalogs, one for Windows servers and one for Windows desktops. Create one
Delivery Group to assign servers and desktops.
C. Create two machine catalogs, one for Windows servers and one for Windows desktops. Create two
Delivery Groups, assigning desktops from one and servers from the other.
D. Create one machine catalog containing Windows servers and desktops. Create two Delivery
Groups based on the catalog, assigning servers to one Delivery Group and desktops to the other.
Answer: C
NO.5 Scenario: A Citrix Engineer installs Receiver on the virtual desktops by using the command line
/includeSSON. Additionally, the engineer enables the Citrix StoreFront store for pass-through
authentication. However, when testing the experience, the engineer is still prompted to log on to
Receiver.
Which step should the engineer have taken to activate single sign-on?
A. Enable pass-through using the icaclient.adm template.
B. Execute the ssonsrv.exe application on each virtual desktop.
C. Rename CDViewer.exe in the Receiver installation directory.
D. Set the Citrix Desktop Service to start automatically at logon.
Answer: A
NO.6 A Citrix Engineer needs to migrate virtual machines from Machine Creation Services to
Provisioning Services. What should the engineer do before installing the Provisioning Services Target
Device software on the master image?
A. Uninstall the Virtual Delivery Agent software on the master image.
B. Disable any anti-virus software and the firewall on the master image.
C. Configure a static IP address on the master image and flush the DNS cache.
D. Change the startup type for the Citrix Desktop Service to manual and stop the service.
Answer: D
NO.7 Four Delivery Groups are configured in the CCH environment.
What is the minimum required Citrix role permission for shadowing user sessions in the pooled
desktop Delivery Group?
A. Full Administrator
B. Help Desk Administrator
C. Read-Only Administrator
D. Delivery Group Administrator
Answer: B
NO.8 A Citrix Engineer needs to configure a XenDesktop Site; however, the engineer does NOT have
permissions to access the SQL Server and the SQL database.
What should the engineer do to configure the new Site?
A. Use an Access database instead of a SQL database.
B. Use the local administrator account for the Delivery Controller.
C. Ask a database administrator to enable mixed-mode authentication on the SQL database server
and relaunch the Site configuration wizard.
D. Generate a SQL database script during the creation of the Site and ask a database administrator to
run the script directly on the database designated for the new Site.
Answer: B