Pass4Test에서 출시한 HP Certification I HP0-P21 (HP-UX 11i v3 Advanced System Administrat ion)시험덤프는 Pass4Test의 엘리트한 IT전문가들이 IT인증실제시험문제를 연구하여 제작한 최신버전 덤프입니다. HP Certification I HP0-P21 (HP-UX 11i v3 Advanced System Administration)덤프는 실제시험의 모든 범위를 커버하고 있어 시험통과율이 거의 100%에 달합니다. 제일 빠른 시간내에 덤프에 있는 문제만 잘 이해하고 기억하신다면 시험패스는 문제없습니다.
NO.1 Which functions does the idisk command perform? (Select two.)
A. lists the EFI partition table on a disk
B. creates a new partition table based on the /tmp/idtable file
C. validates the EFI partition information
D. allows the creation of up to 16 partitions
E. lists the usable blocks available for partitioning
Answer: AC
NO.2 Which LVM feature does Service guard use?
A. delayed activation
B. inclusive activation
C. exclusive activation
D. temporary activation
Answer: C
NO.3 What is a characteristic of the Memory File System (MemFS)?
A. It supports /tmp and /var/tmp to be used as a MemFS.
B. It swaps data to swap space when the system is under memory pressure.
C. It uses disk devices to store compressed data.
D. Data in MemFS remain persistent after unmounts and reboots.
Answer: B
NO.4 You just installed a new HP-UX server named wildcat on your company intranet. You have Ignite-UX
running on a server named ignite_server. What must you do to create a recovery image for the new
server? (Select two.)
A. Ensure the new server has sufficient space in /var.
B. Install Ignite-UX on wildcat.
C. Check the log files in wildcat.
D. Run make_net_recovery -s ignite_server on wildcat.
E. Check the log files in ignite_server.
Answer: BD
NO.5 Which properties can be adjusted in the files of the directory /etc/default? (Select four.)
A. time zone
B. new user properties
C. volume manager properties
D. IP addresses for the network interfaces
E. password format policy
F. configuration of the ip_forwarding parameter
G. default kernel parameters
H. maximum sys log size
Answer: ABEH
NO.6 Management purchases an Integrity Superdome to replace two HP rp8420 Servers. There is available
CPU capacity and management decides to bring additional applications for execution on the Integrity
Superdome. Based on this scenario, which statements can be true? (Select two.)
A. Some of the applications are Linux-based and Linux applications are not supported to run on an
Integrity Superdome.
B. Some of the applications are Linux-based and Linux applications will run in an HP Integrity Virtual
Machine on an Integrity Superdome.
C. Some of the applications are Windows-based that run alongside HP-UX applications in a different
vPar inside of an Integrity Superdome.
D. Some of the applications are Windows-based that run alongside HP-UX applications in a different
nPar inside of an Integrity Superdome.
Answer: BD
NO.7 What are the key benefits of the 11i v3 Mass Storage Stack? (Select two.)
A. improved security capabilities
B. dramatic I/O performance improvements
C. improved PVLinks for multipathing
D. simplified management and automatic configuration
Answer: BD
NO.8 Which file do you edit in order to change the behavior of the syslogd daemon?
A. /etc/syslogd.conf file
B. /etc/syslog.conf file
C. /etc/rc.config.d/syslogd.conf file
D. /var/adm/syslog.conf file
Answer: B
NO.9 Your /home file system mounted on /dev/vg01/lvol4 is running out of space. Which command
should you use to determine which directory has the largest files?
A. du -k /dev/vg01/lvol4
B. du -ak /home
C. du -as /home
D. du -a /dev/vg01/lvol4
Answer: B
NO.10 What are the benefits of the Service guard Storage Management Suite on HP-UX 11i v3? (Select
two.)
A. enables Oracle ASM to run within a file system
B. maintains service levels through the integration with VSE
C. offers tighter integration of Veritas Cluster Server on HP-UX
D. allows for heterogeneous platform support with a single solution
E. enables Oracle RAC customers to get the manageability of a file system
F. provides a single storage management solution to manage all applications
Answer: B, E, F
NO.11 Which kernel parameter defines the maximum amount of physical memory that can be used for
caching file I/O data?
A. bufpages
B. filecache_max
C. dbc_max_pct
D. nbuf
Answer: B
NO.12 Which VxVM daemons need to be running for the volume manager to function correctly?
A. vxfsd, vxiod, vxvmd
B. vxfsd, vxiod, vxnotify
C. vxconfigd, vxdctl, vxiod
D. vxconfigd, vxiod, vxrelocd, vxnotify
Answer: D
NO.13 What are the major advantages of the new Mass Storage Stack of HP-UX 11i v3 compared to
previous HP-UX versions? (Select two.)
A. Device Files are bound to Physical Hardware Paths or LUNs.
B. A significantly larger number of devices can be connected to a single system.
C. When moving devices to different FC switch ports, manual intervention during LVM configuration
is not required.
D. The I/O paths switch transparently in the event of a failure.
E. The Agile Device Files are based on the LUN world wide ID (WWID) address.
Answer: BE
NO.14 Which command should you run to look at the detailed status of a package called pkg1?
A. cmgetconf -v pkg1
B. cmviewconf -v pkg1
C. cmquerycl -v pkg1
D. cmviewcl -v -p pkg1
Answer: D
NO.15 You previously set up HP SIM to use username/password authentication with account "wbemacc"
for the WBEM protocol for all of your managed systems. Your site has a policy that user passwords
must change every three months. It also configures PAM to lock out an account after three invalid
password attempts. What are ways to specify a new password before re-running "Identify Systems"?
(Select two.)
A. Invoke mxwbemsub a -c wbemacc:newpass.
B. For each system, invoke mxnodesecurity -a -n <hostname> -p WBEM -c wbemacc:newpass.
C. Use the HP SIM Options->Protocol Settings->Global Protocol Settings menu item.
D. Select all the systems and use the HP SIM Options->Protocol Settings->System Protocol Settings
menu item.
Answer: BD
NO.16 Which statements are true about threads and processes for a system running HP-UX? (Select three.)
A. A thread can have multiple processes.
B. The kernel parameter max_thread_proc defines the maximum number of concurrent threads
allowed per process.
C. A thread can be killed using the kill command.
D. The kernel parameter nkthread limits the number of threads allowed to run simultaneously,
system-wide.
E. A process can have multiple threads.
F. A thread is similar to a process, but cannot be switched to a different CPU.
Answer: BDE
NO.17 What are valid statements when referring to changing system run levels? (Select two.)
A. Run level 1 is the same as single user mode.
B. Run level 5 is the default run level for newly installed servers.
C. The init command can be used to interactively change run levels.
D. Default networking is started in run level 1.
E. The command shutdown can place the system in single user mode.
Answer: CE
NO.18 You are performing an HP-UX cold installation using the advanced option. Which parameters can you
set on the System Menu tab.? (Select three.)
A. hostname
B. user passwords (non-root)
C. files systems
D. additional interfaces
E. software file sets
F. time zone
Answer: A, D, F
NO.19 Which command should you use to determine the status of a LUN path?
A. ioscan
B. scsimgr
C. olrad
D. rad
Answer: A
NO.20 You have set up a Service guard cluster but received notification from network security that the
current configuration exposes remote user login risks and must be remediated. Which file should be
set up to eliminate the risk?
A. /etc/hosts.equiv
B. /etc/cmcluster/cmclconfig
C. $HOME/.rhosts
D. /etc/cmcluster/cmclnodelist
Answer: D