많은 사이트에서 MCTS 70-680 (TS:Windows 7,Configuring) 인증시험대비자료를 제공하고 있습니다. 그중에서 Pass4Test를 선택한 분들은 MCTS 70-680 (TS:Windows 7,Configuring) 시험통과의 지름길에 오른것과 같습니다. Pass4Test는 시험에서 불합격성적표를 받으시면 덤프비용을 환불하는 서비스를 제공해드려 아무런 걱정없이 MCTS 70-680 (TS:Windows 7,Configuring) 시험에 도전하도록 힘이 되어드립니다. Pass4Test덤프를 사용하여 시험에서 통과하신 분이 전해주신 희소식이 Pass4Test 덤프품질을 증명해드립니다.
NO.1 You have two computers that run Windows 7. Both computers are connected to
a network and
have IP addresses within the 172.16.10.0/24 subnet.
You need
to ensure that both computers can join a HomeGroup.
What should you do?
A.
Enable network discovery.
B. Set the network location to Home network.
C.
Configure Windows Firewall to allow the Netlogon service.
D. Change the IP
addresses to be within the 192.168.1.0/24 subnet.
Answer:
B
NO.2 You are installing
a custom Windows 7 system image to a new computer. Perform the
following
tasks"
* Start the new computer by using the Windows preinstallation
Environment (WPE) * Connect to a
shared network location that contains the
Windows 7 image file.
You need to apply the Windows 7 image to the
computer.
What should you do before you apply the image?
A. Mount the
image.
B. Configure Windows Firewall.
C. Configure and format the haard
disk drive.
D. Initializa the Boot Configuration data (BCD) store.
Answer:
C
NO.3 You have a customized image of Windows 7 Professional.
You need
to create a new unattended file to automate the deployment of the image. You
must
achieve this goal by using the minimum amount of administrative effort.
What should you do first?
A. Run Imagex.exe and specify the /mount
parameter.
B. Run Dism.exe and specify the /mount-WIM parameter.
C. From
Microsoft Deployment Toolkit (MDT), add the custom Windows image (WIM).
D.
From Windows System Image Manager (Windows SIM), open the custom Windows image
(WIM).
Answer: D
NO.4 You have a computer that runs Windows 7 Professional. A
USB disk is attached to the
computer.
You need to ensure that you can
enable BitLocker to go on the USB disk.
What should you do?
A. Enable
Encrypting File System (EFS).
B. Upgrade the computer to Windows 7
Enterprise.
C. Initialize the Trusted Platform Module (TPM) hardware.
D.
Obtain a client certificate from an enterprise certification authority
(CA).
Answer: B
NO.5 You have a computer that
runs Windows 7.
You need to record when an incoming connection is allowed
through Windows firewall.
What should you do?
A. In Local Group Policy,
modify the audit policy.
B. In Local Group Policy, modify the system audit
policy.
C. From the Windows Firewall with Advanced Security properties, set
the logging settings to Log
successful connections.
D. From the Windows
Firewall with Advanced Security properties, set the Data Protection
(Quick
Mode) IPSec settings to Advanced.
Answer:
C
NO.6 A company has client computers that run Windows 7
Enterprise.
You need to ensure that when Windows runs applications with
elevated privileges, it enforces the
Public Key Infrastructure (PKI)
certification path validation for a given executable file.
What should you
use to accomplish this goal?
A. the User Account Control Settings Control
Panel window
B. the Services management console
C. Device Manager
D.
Local Users and Groups
E. the icacls command
F. the Group Policy
management console
G. the folder Properties window
H. share
permissions
I. the netsh command
Answer: F
NO.7 You
have a computer that runs windows 7.
You need to configure the monitor on the
computer to turn off after 30 minutes of inactive.
What should you do?
A.
From personalization, change the theme.
B. From display, change display
settings.
C. From action center, change the Action Center settings.
D.
From power options, change the current power plan settings.
Answer:
D
NO.8 You have a computer that runs Windows 7.
The computer's hard
disks are configured as shown in the following table.
You need to ensure that
you can recover the operating system and all the files on the computer
if
hard disk 0 experiences hardware failure.
What should you do?
A.
Shrink drive C and then create a new partition.
B. Create an Easy Transfer
file on a network location.
C. Use the Backup and Restore tool to back up
data files for all users.
D. Use the Backup and Restore tool to create a
system image on an external hard disk.
Answer: D
a network and
have IP addresses within the 172.16.10.0/24 subnet.
You need
to ensure that both computers can join a HomeGroup.
What should you do?
A.
Enable network discovery.
B. Set the network location to Home network.
C.
Configure Windows Firewall to allow the Netlogon service.
D. Change the IP
addresses to be within the 192.168.1.0/24 subnet.
Answer:
B
NO.2 You are installing
a custom Windows 7 system image to a new computer. Perform the
following
tasks"
* Start the new computer by using the Windows preinstallation
Environment (WPE) * Connect to a
shared network location that contains the
Windows 7 image file.
You need to apply the Windows 7 image to the
computer.
What should you do before you apply the image?
A. Mount the
image.
B. Configure Windows Firewall.
C. Configure and format the haard
disk drive.
D. Initializa the Boot Configuration data (BCD) store.
Answer:
C
NO.3 You have a customized image of Windows 7 Professional.
You need
to create a new unattended file to automate the deployment of the image. You
must
achieve this goal by using the minimum amount of administrative effort.
What should you do first?
A. Run Imagex.exe and specify the /mount
parameter.
B. Run Dism.exe and specify the /mount-WIM parameter.
C. From
Microsoft Deployment Toolkit (MDT), add the custom Windows image (WIM).
D.
From Windows System Image Manager (Windows SIM), open the custom Windows image
(WIM).
Answer: D
NO.4 You have a computer that runs Windows 7 Professional. A
USB disk is attached to the
computer.
You need to ensure that you can
enable BitLocker to go on the USB disk.
What should you do?
A. Enable
Encrypting File System (EFS).
B. Upgrade the computer to Windows 7
Enterprise.
C. Initialize the Trusted Platform Module (TPM) hardware.
D.
Obtain a client certificate from an enterprise certification authority
(CA).
Answer: B
NO.5 You have a computer that
runs Windows 7.
You need to record when an incoming connection is allowed
through Windows firewall.
What should you do?
A. In Local Group Policy,
modify the audit policy.
B. In Local Group Policy, modify the system audit
policy.
C. From the Windows Firewall with Advanced Security properties, set
the logging settings to Log
successful connections.
D. From the Windows
Firewall with Advanced Security properties, set the Data Protection
(Quick
Mode) IPSec settings to Advanced.
Answer:
C
NO.6 A company has client computers that run Windows 7
Enterprise.
You need to ensure that when Windows runs applications with
elevated privileges, it enforces the
Public Key Infrastructure (PKI)
certification path validation for a given executable file.
What should you
use to accomplish this goal?
A. the User Account Control Settings Control
Panel window
B. the Services management console
C. Device Manager
D.
Local Users and Groups
E. the icacls command
F. the Group Policy
management console
G. the folder Properties window
H. share
permissions
I. the netsh command
Answer: F
NO.7 You
have a computer that runs windows 7.
You need to configure the monitor on the
computer to turn off after 30 minutes of inactive.
What should you do?
A.
From personalization, change the theme.
B. From display, change display
settings.
C. From action center, change the Action Center settings.
D.
From power options, change the current power plan settings.
Answer:
D
NO.8 You have a computer that runs Windows 7.
The computer's hard
disks are configured as shown in the following table.
You need to ensure that
you can recover the operating system and all the files on the computer
if
hard disk 0 experiences hardware failure.
What should you do?
A.
Shrink drive C and then create a new partition.
B. Create an Easy Transfer
file on a network location.
C. Use the Backup and Restore tool to back up
data files for all users.
D. Use the Backup and Restore tool to create a
system image on an external hard disk.
Answer: D