OCM자격증 – IT Market에서 데이터베이스관리자로써의 최상위 전문가를 뜻합니다. 최고의 실력자임을 증빙하는 오라클의 상징적인 자격증이며 메니져급으로 성장할수 있는 국제공인 최고의 자격증입니다.Pass4Test의  11g 1Z0-050 (Oracle Database 11g: New Features for Administrators) 덤프는 최근유행인 PDF버전과 소프트웨어버전 두가지 버전으로 제공됩니다.PDF버전을 먼저 공부하고 소프트웨어번으로 PDF버전의 내용을 얼마나 기억하였는지 테스트할수 있습니다. 두 버전을 모두 구입하시면 시험에서 고득점으로 패스가능합니다.인터넷에는  11g 1Z0-050 (Oracle Database 11g: New Feat ures for Administrators) 시험대비공부자료가 헤아릴수 없을 정도로 많습니다.이렇게 많은 11g 1Z0-050 (Oracle Database 11g: New Features for Administrators) 공부자료중 대부분 분들께서 저희 Pass4Test를 선택하는 이유는 덤프 업데이트가 다른 사이트보다 빠르다는 것이 제일 큰 이유가 아닐가 싶습니다. Pass4Test의  11g 1Z0-050 (Oracle Database 11g: New Features for Administra tors) 덤프를 구매하시면 덤프가 업데이트되면 무료로 업데이트된 버전을 제공받을수 있습니다.

 

 

NO.1 Evaluate the following block of code: BEGIN DBMS_NETWORK_ACL_ADMIN.CREATE_ACL ( acl
=> 'mycompany-com-permissions.xml', principal => 'ACCT_MGR', is_grant => TRUE, privilege =>
'connect'); DBMS_NETWORK_ACL_ADMIN.ASSIGN_ACL ( acl =>
'mycompany-com-permissions.xml', host => '*.mycompany.com'); END; What is the outcome of
the above code?
A.It produces an error because a fully qualified host name needs to be specified.
B.It produces an error because the range of ports associated with the hosts has not been specified.
C.It creates an access control list (ACL) with the user ACCT_MGR who gets the CONNECT and
RESOLVE privileges.
D.It creates an access control list (ACL) with the user ACCT_MGR who gets the CONNECT privilege but
not the RESOLVE privilege.
Correct:C

NO.2 You are managing the APPPROD database as a DBA. You plan to duplicate this database in the
same system with the name DUPDB. You issued the following RMAN commands to create a
duplicate database: RMAN> CONNECT target sys/sys@APPPROD RMAN> DUPLICATE TARGET
DATABASE TO dupdb FROM ACTIVE DATABASE DB_FILE_NAME_CONVERT
'/oracle/oradata/prod/', '/scratch/oracle/oradata/dupdb/' SPILE PARAMETER_VALUE_CONVERT
'/oracle/oradata/prod/', '/scratch/oracle/oradata/dupdb/' SET SGA_MAX_SIZE = '300M' SET
SGA_TARGET = '250M' SET LOG_FILE_NAME_CONVERT '/oracle/oradata/prod/redo/',
'/scratch/oracle/oradata/dupdb/redo/'; Which three are the prerequisites for the successful
execution of the above command? (Choose three.)
A.The source database should be open.
B.The target database should be in ARCHIVELOG mode if it is open.
C.RMAN should be connected to both the instances as SYSDBA.
D.The target database backups should be copied to the source database backup directories.
E.The password file must exist for the source database and have the same SYS user password as the
target.
Correct:B C E

NO.3 You want to take the backup of the USERS tablespace. It has a single data file of 900 MB.. You
have tape drives of 300 MB each. The SBT channel is configured for the RMAN. To accomplish the
backup, you issued the following RMAN command: RMAN> BACKUP SECTION SIZE 300M
TABLESPACE users; Which two statements are true regarding the execution of the above
command? (Choose two.)
A.The backup piece size will be limited to 300 MB.
B.The operation is accomplished using the default channel available.
C.The RMAN parallelizes the backup although the parallelism is not set for a channel.
D.Three channels for the tape drive must be configured by setting the parallelism to three.
Correct:A B

NO.4 Which two statements about workload capture and replay operations are true? (Choose two.)
A.The clients must be created manually on the test machines to perform more realistic testing.
B.Restart the database in RESTRICTED mode before beginning workload replay to enable a clean state
for workload replay.
C.Restart the database in RESTRICTED mode before beginning workload capture to enable a clean state
for capturing the workload.
D.The application state of the capture system must be identical to the application state of the replay
system when the workload replay begins.
Correct:C D

NO.5 Which three statements about performance analysis by SQL Performance Analyzer are true?
(Choose three.)
A.It detects changes in SQL execution plans.
B.It produces results that can be used to create the SQL plan baseline.
C.The importance of SQL statements is based on the size of the objects accessed.
D.It generates recommendations to run SQL Tuning Advisor to tune regressed SQLs.
E.It shows only the overall impact on workload and not the net SQL impact on workload.
Correct:A B D

NO.6 You installed Oracle Database 11g and are performing a manual upgrade of the Oracle9i
database. As a part of the upgrade process, you execute the following script: SQL>@utlu111i.sql
Which statement about the execution of this script is true?
A.It must be executed from the Oracle Database 11g environment.
B.It must be executed only after the SYSAUX tablespace has been created.
C.It must be executed from the environment of the database that is being upgraded.
D.It must be executed only after AUTOEXTEND is set to ON for all existing tablespaces.
E.It must be executed from both the Oracle Database 11g and Oracle Database 9i environments.
Correct:C

NO.7 Which steps are mandatory to enable Direct NFS? 1. Mount all required file systems using the
kernel NFS driver. 2. Create an oranfstab file containing the attributes for each NFS server to be
accessed using Direct NFS. 3. Replace the ODM library libodm11.so_stub with libodm11.so.
A.2 and 3
B.1 and 3
C.1 and 2
D.1, 2 and 3
Correct:B

NO.8 You are managing an Oracle Database 11g database with the ASM storage. The database is
having big file tablespaces. You want files to open faster and less memory to be used in the
shared pool to manage the extent maps. What configuration would you effect to achieve your
objective? (Choose all that apply.)
A.Set the ASM compatibility attribute for the ASM disk group to 11.1.0.
B.Set the RDBMS compatibility attribute for the ASM disk group to 11.1.0.
C.Set the COMPATIBLE initialization parameter for the ASM instance to 11.1.0.
D.Set the COMPATIBLE initialization parameter for the database instance to 11.1.0.
Correct:A D

NO.9 Identify the two direct sources from where SQL plans can be loaded into the SQL plan baselines.
(Choose two.)
A.Cursor cache
B.Stored outline
C.SQL Tuning Set
D.Automatic Workload Repository (AWR) snapshots
Correct:A C

NO.10 View the Exhibit to examine the parameter values. You are planning to set the value for the
MEMORY_TARGET parameter of your database instance. What value would you assign?
A.90 MB
B.272 MB
C.362 MB
D.1440 MB
Correct:C

NO.11 USER_DATA is a nonencrypted tablespace that contains a set of tables with data. You want to
convert all existing data in the USER_DATA tablespace and the new data into the encrypted format.
Which methods would you use to achieve this? (Choose all that apply.)
A.Use Data Pump to transfer the existing data to a new encrypted tablespace.
B.Use ALTER TABLE..MOVE to transfer the existing data to a new encrypted tablespace.
C.Use CREATE TABLE AS SELECT to transfer the existing data to a new encrypted tablespace.
D.Enable row movement for each table to be encrypted and then use ALTER TABLESPACE to encrypt
the tablespace.
E.Encrypt the USER_DATA tablespace using the ALTER TABLESPACE statement so that all the data in
the tablespace is automatically encrypted.
Correct:A B C

NO.12 Which statement is true regarding the VALIDATE DATABASE command?
A.It checks the database for intrablock corruptions only.
B.It checks for block corruption in the valid backups of the database.
C.It checks the database for both intrablock and interblock corruptions.
D.It checks for only those corrupted blocks that are associated with data files.
Correct:A

NO.13 Which statement describes the effect of table redefinition on the triggers attached to the table?
A.All triggers on the table remain valid.
B.All triggers on the table are invalidated and are automatically revalidated with the next DML execution
on the table.
C.All triggers on the table are invalidated and must be manually recompiled before the next DML
execution on the table.
D.Only triggers that are affected by the changes to the structure of the table are invalidated and
automatically revalidated with the next DML execution on the table.
Correct:B

NO.14 Which tasks can be accomplished using the Enterprise Manager Support Workbench in Oracle
Database 11g? (Choose all that apply.)
A.Generate reports on data failure such as data file failures.
B.You can package and upload diagnostic data to Oracle Support.
C.You can track the Service Request (SR) and implement repairs.
D.You can manually run health checks to gather diagnostic data for a problem.
Correct:B C D

NO.15 View the Exhibit. Examine the following command that is executed for the TRANSPORT table in
the SH schema: SQL> SELECT DBMS_STATS.CREATE_EXTENDED_STATS('sh', 'customers_obe',
'(country_id, cust_state_province)') FROM dual; Which statement describes the significance of
this command?
A.It collects statistics into the pending area in the data dictionary.
B.It creates a virtual hidden column in the CUSTOMERS_OBE table.
C.It collects statistics with AUTO_SAMPLE_SIZE for ESTIMATE_PERCENT.
D.It creates a histogram to hold skewed information about the data in the columns.
Correct:B

NO.16 When executing a SQL workload, you choose to generate execution plans only, without
collecting execution statistics. Which two statements describe the implications of this? (Choose
two.)
A.It produces less accurate results of the comparison analysis.
B.It automatically calls the SQL Tuning Advisor for recommendations.
C.It shortens the time of execution and reduces the impact on system resources.
D.Only the changes in the execution plan, and not performance regression, are detected.
Correct:A C

NO.17 Which statements are true regarding the concept of problems and incidents in the fault
diagnosability infrastructure for Oracle Database 11g? (Choose all that apply.)
A.The problem key is the same as the incident number.
B.Every problem has a problem key, which is a text string that describes the problem.
C.The database makes an entry into the alert log file when problems and incidents occur.
D.The database sends an incident alert to the Oracle Enterprise Manager Database Home page.
E.Only the incident metadata and dumps are stored in the Automatic Diagnostic Repository (ADR).
Correct:B C D

NO.18 You are managing an Oracle Database 11g database. You want to take a backup on tape drives
of the USERS tablespace that has a single data file of 900 MB. You have tape drives of 300 MB
each. To accomplish the backup, you issued the following RMAN command: RMAN>BACKUP
SECTION SIZE 300M TABLESPACE users; What configuration should be effected to accomplish
faster and optimized backups by using the above command?
A.The SBT channel must be configured, with the MAXPIECESIZE set to 300 MB.
B.The SBT channel must be configured, with the parallelism setting for the SBT device set to 3.
C.The COMPATIBLE initialization parameter for the database instance must be set to at least 10.0.
D.The SBT channel must be configured, with the default parallelism setting for the SBT device set to 1.
Correct:B

NO.19 Which two are the prerequisites to enable Flashback Data Archive? (Choose two.)
A.Undo retention guarantee must be enabled.
B.Database must be running in archivelog mode.
C.Automatic undo management must be enabled.
D.The tablespace on which the Flashback Data Archive is created must be managed with Automatic
Segment Space Management (ASSM).
Correct:C D

NO.20 View the Exhibit exhibit1 to examine the series of SQL commands. View the Exhibit exhibit2 to
examine the plans available in the SQL plan baseline. The baseline in the first row of the Exhibit is
created when OPTIMIZER_MODE was set to FIRST_ROWS. Which statement is true if the SQL
query in exhibit1 is executed again when the value of OPTIMIZER_MODE is set to FIRST_ROWS?
A.The optimizer uses a new plan because none of the plans in the exhibit2 are fixed plans.
B.The optimizer uses the plan in the second row of the exhibit2 because it is an accepted plan.
C.The optimizer uses the plan in the first row of the exhibit2 because it is the latest generated plan.
D.The optimizer uses the plan in the first row of the exhibit2 because OPTIMIZER_MODE was set to
FIRST_ROW during its creation.
Correct:B