Pass4Test 는 아주 우수한 IT인증자료사이트입니다. Pass4Test에서 여러분은  CheckPoint 156-215.71인증시험관련 덤프를 얻을수 있습니다. Pass4Test 사이트에서 제공하는  CheckPoint 156-215.71관련자료의 일부분 문제와 답 등 샘플을 무료로 다운받아 체험해볼 수 있습니다. 그리고Pass4Test에서는 CheckPoint 156-215.71자료구매 후 추후 업데이트되는 동시에 최신버전을 무료로 발송해드립니다. 우리는  CheckPoint 156-215.71인증시험관련 모든 자료를 여러분들에서 제공할 것입니다. Pass4Test 의 IT전문 팀은 부단한 업계경험과 연구를 이용하여 정확하고 디테일 한 시험문제와 답으로 여러분이 아주 간단히   CheckPoint 156-215.71시험을 패스할 수 있도록 최선을 다하고 있습니다.Pass4Test 의   CheckPoint 156-215.71 자료로 자신만만한 시험 준비 하시기를 바랍니다. 우리를 선택함으로 자신의 시간을 아끼는 셈이라고 생각하시면 됩니다. CheckPoint 156-215.71 로 빠른 시일내에 자격증 취득하시고  CheckPoint 156-215.71 IT업계중에 엘리트한 전문가로 되시기를 바랍니다.IT인증자격증만 소지한다면 일상생활에서 많은 도움이 될것입니다. 하지만 문제는 어떻게  간단하게 시험을 패스할것인가 입니다. Pass4Test는 IT전문가들이 제공한 시험관련 최신 연구자료들을 제공해드립니다.Pass4Test을 선택함으로써 여러분은 성공도 선택한것이라고 볼수 있습니다.

 

 

NO.1 Latency has lost SIC communication with her Security Gateway and she needs to re establish
SIC.What would be the correct order of steps needed to perform this task?
1) Create a new activation key on the Security Gateway, then exit cpconfig.
2) Click the Communication tab on the Security Gateway object, and then click Reset.
3) Run the cpconfig tool, and then select Secure Internal Communication to reset.
4) Input the new activation key in the Security Gateway object, and then click initialize
5) Run the cpconfig tool, then select source Internal Communication to reset.
A.5, 4, 1, 2
B.2, 3, 1, 4
C.2, 5, 1, 4
D.3, 1, 4, 2
Answer: B

NO.2 Security Gateway R71 supports User Authentication for which of the following services? Select the
response below that contains the most complete list of supported services.
A.FTP, HTTP, TELNET
B.FTP, TELNET
C.SMTP, FTP, HTTP, TELNET
D.SMTP, FTP, TELNET
Answer: A

NO.3 SmartView Tracker audit logs

NO.4 You have created a rule Base Firewall, websydney.Now you are going to create a new policy package
with security and address transaction rules for a secured gateway.What is true about the new package s
NAT rules?
A.Rules 1 and 5 will be appear in the new package
B.Rules 1, 3, 4and 5 will appear in the new package
C.Rules 2, 3 and 4 will appear in the new package
D.NAT rules will be empty in the new package
Answer: C

NO.5 An advantage of using central instead of local licensing is:
A.A license can be taken from one Security Management server and given to another Security
Management Server.
B.Only one IP address is used for all licenses.
C.Licenses are automatically attached to their respective Security Gateways.
D.The license must be renewed when changing the IP address of security Gateway.Each module s
license has a unique IP address.
Answer: B

NO.6 While in Smart View Tracker, Brady has noticed some very odd network traffic that he thinks could be
an intrusion.He decides to block the traffic for 60 but cannot remember all the steps.What is the correct
order of steps needed to perform this?
1) Select the Active Mode tab In Smart view Tracker
2) Select Tools > Block Intruder
3) Select the Log Viewing tab in SmartView Tracker
4) Set the Blocking Time out value to 60 minutes
5) Highlight the connection he wishes to block
A.3, 2, 5, 4
B.3, 5, 2, 4
C.1, 5, 2, 4
D.1, 2, 5, 4
Answer: C

NO.7 For which service is it NOT possible to configure user authentication?
A.HTTPS
B.FTP
C.SSH
D.Telnet
Answer: C

NO.8 SIC certificates

NO.9 IPS Profiles

NO.10 Which type of resource could a Security Administrator use to control access to specific file shares on
target machines?
A.URI
B.CIFS
C.Telnet
D.FTP
Answer: B

NO.11 Which of these security policy changes optimize Security Gateway performance?
A.Use Automatic NAT rules instead of Manual NAT rules whenever possible
B.Putting the least-used rule at the top of the Rule Base
C.Using groups within groups in the manual NAT Rule Base
D.Using domain objects in rules when possible
Answer: A

NO.12 Gateway route table

NO.13 If you check the box Use Aggressive Mode in the IKE Properties dialog box, the standard:
A.three-packet IKE Phase 2 exchange Is replaced by a six-packet exchange
B.three-packet IKE Phase 2 exchange is replaced by a two-packet exchange
C.six-packet IKE Phase 1 exchange is replaced by a three-packet exchange
D.three-packet IKE Phase 1 exchange is replaced by a six-packet exchange
Answer: C

NO.14 Blocked connections

NO.15 What can NOT be selected for VPN tunnel sharing?
A.One tunnel per subnet pair
B.One tunnel per Gateway pair
C.One tunnel per pair of hosts
D.One tunnel per VPN domain pair
Answer: D

NO.16 When configuring the network interfaces of a checkpoint Gateway, the direction can be defined as
Internal or external.
What is meaning of interface leading to DMZ?
A.It defines the DMZ Interface since this information is necessary for Content Control.
B.Using restricted Gateways, this option automatically turns off the counting of IP Addresses originating
from this interface
C.When selecting this option.Ann-Spoofing is configured automatically to this net.
D.Activating this option automatically turns this interface to External
Answer: A

NO.17 Phase 1 uses________.
A.Conditional
B.Sequential
C.Asymmetric
D.Symmetric
Answer: C

NO.18 Which of the following uses the same key to decrypt as it does to encrypt?
A.Asymmetric encryption
B.Symmetric encryption
C.Certificate-based encryption
D.Dynamic encryption
Answer: A

NO.19 Which answers are TRUE? Automatic Static NAT CANNOT be used when:
i) NAT decision is based on the destination port
ii) Source and Destination IP both have to be translated
iii) The NAT rule should only be installed on a dedicated Gateway only
iv) NAT should be performed on the server side
A.(i), (ii), and (iii)
B.(i), and (ii)
C.ii) and (iv)
D.only (i)
Answer: D

NO.20 A Web server behind the Security Gateway is set to Automatic Static NAT.Client side NAT is not
checked in the Global Properties.A client on the Internet initiates a session to the Web Server.Assuming
there is a rule allowing this traffic, what other configuration must be done to allow the traffic to reach the
Web server?
A.Automatic ARP must be unchecked in the Global Properties.
B.A static route must be added on the Security Gateway to the internal host.
C.Nothing else must be configured.
D.A static route for the NAT IP must be added to the Gateway's upstream router.
Answer: B

NO.21 Gateway licenses
A.3, 4, 5, 6, 9, 12, 13
B.5, 6, 9, 12, 13
C.1, 2, 8, 10, 11
D.2, 4, 7, 10, 11
Answer: B
3.You believe Phase 2 negotiations are failing while you are attempting to configure a site-to-site VPN
with one of your firm's business partners.Which SmartConsole application should you use to confirm your
suspicions?
A.SmartDashboard
B.SmartView Tracker
C.SmartUpdate
D.SmartView Status
Answer: C
4.You are running a R71 Security Gateway on SecurePlatform, in case of a hardware failure.You have a
server with the exact same hardware and firewall version Installed.What backup method could be used to
quickly put the secondary firewall into production?
A.Upgrade_export
B.Manual backup
C.Snapshot
D.Backup
Answer: C
5.Your company is still using traditional mode VPN configuration on all Gateways and policies.Your
manager now requires you to migrate to a simplified VPN policy to benefit from the new features.
This needs to be done with no downtime due to critical applications which must run constantly.How would
you start such a migration?
A.This cannot be done without downtime as a VPN between a traditional mode Gateway and a simplified
mode Gateway does not work.
B.You first need to completely rewrite all policies in simplified mode and then push this new policy to all
Gateways at the same time.
C.This can not be done as it requires a SIC- reset on the Gateways first forcing an outage.
D.Convert the required Gateway policies using the simplified VPN wizard, check their logic and then
migrate Gateway per Gateway.
Answer: D
6.What physical machine must have access to the User Center public IP address when checking for new
packages with smartUpdate?
A.SmartUpdate GUI PC
B.SmartUpdate Repository SQL database Server
C.A Security Gateway retrieving the new upgrade package
D.SmartUpdate installed Security Management Server PC
Answer: A
7.In SmartView Tracker, which rule shows when a packet is dropped due to anti-spoofing?
A.Blank field under Rule Number
B.Rule 0
C.Cleanup Rule
D.Rule 1
Answer: B
8.The URL Filtering Policy can be configured to monitor URLs in order to:
A.Log sites from blocked categories.
B.Redirect users to a new URL.
C.Block sites only once.
D.Alert the Administrator to block a suspicious site.
Answer: A
9.The Customer has a small Check Point installation which includes one Windows XP workstation as
SmartConsole, one Solaris server working as security Management Server, and a third server running
SecurePlatform as Security Gateway.This is an Example of a (n):
A.Stand-Alone Installation.
B.Unsupported configuration
C.Distributed Installation
D.Hybrid Installation.
Answer: C
10.You want to implement Static Destination NAT in order to provide external, Internet users access to an
internal Webserver that has a reserved (RFC 1918) IP address You have an unused valid IP address on
the network between your Security Gateway and ISP router.You control the router that sits between the
external interface of the firewall and the Internet.What is an alternative configuration if proxy ARP cannot
be used on your Security Gateway?
A.Place a static host route on the firewall for the valid IP address to the internal Web server.
B.Place a static ARP entry on the ISP router for the valid IP address to the firewall s external address.
C.Publish a proxy ARP entry on the ISP router instead of the firewall for the valid IP address.
D.Publish a proxy ARP entry on the internal Web server instead of the firewall for the valid IP address.
Answer: B
11.The third-shift Administrator was updating Security Management Server access settings in global
properties.He managed to lock all of the administrators out of their accounts.How should you unlock these
accounts?
A.Login to SmartDashboard as the special cpconfig_admin user account, right click on administrator
object and select Unlock.
B.Type fwm lock_admin -ua from the command line of the Security Manager server.
C.Reinstall the Security Management Server and restore using upgrade_import.
D.Delete the file admin.lock in the $fwDIR/tmp/ directory of the Security Management server.
Answer: B
12.You find a suspicious connection from a problematic host.You decide that you want to block everything
from that whole network, not just the problematic host.You want to block this for an hour while you
investigate further, but you do not want to add any rules to the Rule Base.How do you achieve this?
A.Add a °t e m po r a r ¡± rule u si n g Sm a r t D ashbo ard an d s el e c t hi d e ru.
B.Create a Suspicious Activity Rule in SmartView Monitor
C.Use dbedit to script the addition of a rule directly into the Rule Bases_5_0.fws configuration file.
D.Select block intruder from the tools menu in SmartView Tracker.
Answer: B
13.The Check Point Security Gateway's virtual machine (kernel) exists between which two layers of the
OSI model?
A.Session and Network layers
B.Application and Presentation layers
C.Physical and Data link layers
D.Network and Data link layers
Answer: D

NO.22 VPN communities

NO.23 Secure Platform WebUI Users

NO.24 SmartView Tracker traffic logs

NO.25 A rule _______ is designed to log and drop all other communication that does not match another rule?
A.Stealth
B.Cleanup
C.Reject
D.Anti-Spoofing
Answer: B

NO.26 Of the following, what parameters will not be preserved when using Database Revision Control?
1) Simplified mode Rule Bases
2) Traditional mode Rule Bases

NO.27 You run cpconfig to reset SIC on the Security Gateway.After the SIC reset operation is complete, the
policy that will be installed is the
A.Last policy that was installed
B.Default filter
C.Standard policy
D.Initial policy
Answer: D

NO.28 Manual NAT rules

NO.29 Which port must be allowed to pass through enforcement points in order to allow packet logging to
operate correctly?
A.514
B.256
C.257
D.258
Answer: C

NO.30 Implied Rules