Oracle 1Z0-820 (Upgrade to Oracle Solaris 11 System Administrator) 시험의 자격증은 여러분에 많은 도움이 되리라 믿습니다. IT업계에 종사하시는 분들은  한층 더 업그레이드될 것이고 생활에서도 분명히 많은 도움이 될 것입니다. 자격증 취득은 자신의 경력에 중요한 가산점이 될수 있는것입니다 .Oracle 1Z0-820 (Upgrade to Oracle Solaris 11 System Administrator) 시험은 여러분이it지식 테스트 입니다. Pass4Test에서는 여러분의 편리를 위하여 Pass4Test만의 최고이자 최신인  Oracle 1Z0-820 (Upgrade to Oracle Solaris 11 System Administrator) 덤프를 제공해 드립니다. Pass4Test는 여러분의 최고의 선택입니다. Pass4Test는 제일 전면적인 Oracle 1Z0-820 (Upgrad e to Oracle Solaris 11 System Administrator) 인증시험자료의 문제와 답을 가지고 있습니다.Pass4 Test는  여러분이 원하는 Oracle 1Z0-820 (Upgrade to Oracle Solaris 11 System Administrator) 시험관련자료를 해결해드릴 수 있는 사이트입니다. Pass4Test에서 제공하는 자료로 응시하면 패스는 문제 없습니다, 여러분은 고득점으로 시험을 통과할 것입니다.Oracle 1Z0-820 (Upgrade to Oracle Solaris 11 System Administrator) 시험을 위하여 최고의 선택이 필요합니다. Pass4Test 를선택함으로 좋은 성적도 얻고  시간은 적게 들이고  돈도 많이 절약됩니다.우리 Pass4Test 는 여러분의 응시에 많은 도움이 되어드립니다.

 

 

NO.1 Review the zonestat command:

zonestate -q physical -memory -R high -z -p -p zones
10 24h 60m
Select the option that correctly describes the information that is displayed by this command.
A. It is a sample of dbzone s physical memory usage taken every hour over a 24-hour period.
Only the top 10 samplings of peak memory usage are displayed.
All other utilization data is eliminated.
B. It is a sample of dbzone s CPU, virtual memory, and networking utilization.
Physical memory is executed from the report.
The sampling is taken every 10 minutes over a 24-hour period and peak utilization id displayed
each hour.
C. It is a sample of dbzone s CPU, virtual memory, and networking utilization.
Physical memory is executed from the report.
The sampling is taken every 10 minutes over a 24-hour period and displayed each hour.
D. It is a sample of dbzone s physical memory usage taken every 10 seconds and 24-hour period.
Only peak virtual memory usage and CPU utilization are displayed each hour.
All other Utilization data is eliminated.
E. It is a sample of dbzone s physical memory usage taken every 10 seconds and 24-hour period.
Only peak memory usage is displayed each hour.
All other utilization data is eliminated.
Answer: D

NO.2 configuring NFS on a server. Select the two statements that are true.
A. Resources listed in /etc/dfs/dfstab are automatically shared on boot up.
B. A directory cannot be shared if a subdirectory below it is already shared.
C. Renaming a share created with the zfs set share command is not supported.
D. NFS and SMB protocols cannot be used simultaneously to share the same directory.
Answer: A,C

NO.3 Which five statements describe options available for installing the Oracle Solaris 11operating system
using the installation media?
A. You can perform a text or LiveCD installation locally or over the network.
B. The text Installer does not install the GNOME desktop. The GNOME desktop package must he added
after you have installed the operating system.
C. The LiveCD Installation cannot be used to install multiple instances of Oracle Solaris.
D. The LiveCD installer cannot be used if you need to preserve a specific Solaris Volume Table of
Contents (VTOC) slice in your current operating system.
E. The LiveCD Installer is for x86 platforms only.
F. The GUI installer cannot be used to upgrade your operating system from Solaris 10.
G. If you are installing Oracle Solaris 11 on an x86-based system that will have more than one operating
system installed in it, you cannot partition your disk during the installation process.
H. The LiveCD installer can be used for SPARC or x86 platforms.
Answer: A, B, D, F

NO.4 You need to set up an Oracle Solaris 11 host as an iSCSI target so that the host's disk can be accessed
over a storage network. The disk device is c3t4d0.
Which six options describe the steps that need to be taken on this host to enable an iSCSI target?
A. Create a ZFS file system named iscsi/target.
B. Create a zpool named iscsi with disk device c3t4d0
C. Create zfs volume named iscsi/target.
D. Use the stmfadm command to create a LUN using /dev/zvol/rdsk/iscsi/target.
E. Use the stmfadm command to create a LUN using iscsi/target.
F. Use the stmfadm command to make the LUN viewable.
G. Use the stmfadm command to make the volume viewable.
H. Enable the svc:/network/iscsi/target:default Service.
I. Use the itadm command to create the iSCSI target.
Answer: B, C, D, F, H, I

NO.5 Identify the two security features incorporated in the Oracle Solaris 11 Cryptographic Framework.
A. Layer 5 IP address encryptions
B. Internet protocol security
C. Diffie-Kerberos coaxial key encryption
D. Signed cryptographic plugins (providers)
E. Kernel support for signed antivirus plugins
Answer: D,E

NO.6 When setting up Automated Installer (AI) clients, an interactive tool can be used to generate a custom
system configuration profile. The profile will specify the time zone, data and time, user and root accounts,
and name services used for an AI client installation. This interactive tool will prompt you to enter the client
information and an SC profile (XML) will be created.
Which interactive tool can be used to generate this question configuration?
A. sys-unconfig
B. installadm set-criteria
C. sysconfig create-profile
D. installadm create-profile
Answer: B

NO.7 Review the ZFS dataset output that is displayed on your system:
Which four correctly describe the output?
A. /data/file4 has been added.
B. The link /data/file3 has been added.
C. /data/file3 has been renamed to /data/file13.
D. /data/file4 has been modified and is now larger.
E. /data/file1 has been deleted.
F. /data/file1 has been modified and is now smaller.
G. /data/file5 has been modified.
H. /data/file3 (a link) has been removed.
Answer: A, C, E, G

NO.8 You have already generated a 256-bit AES raw key and named the keystore file /mykey. You need to
use the key to create an encrypted file system.
Which command should you use to create a ZFS encrypted file system named pool1/encrypt using the
/mykey keystore?
A. zfs create-oencryption = /mykey pool1/encrypt
B. zfs create-oencryption = 256-ccm-okeysource = raw, file : ///my key pool1/encrypt
C. zfs create-oencryption = AES keysource = /mykey pool1/encrypt
D. zfs create-oencryption = on keystore = /mykey pool1/encrypt
Answer: B

NO.9 You need to update an OS image on a client. The pkg publishers command displays the wrong
publisher with the wrong update: PUBLISHERTYPESTATUSURI Solaris origin
onlinehttp://pkg.oracle.com/solaris/release
The update is available on the updated publisher: PUBLISHERTYPESTATUSURI Solaris
originonlinehttp://sysA.example.com
Select the option that describes the procedure used to update the OS image on the system from the
updated publisher.
A. Copy the repository from the ISO image onto the local client.
Configure the repository on the client by using the svccfg-s command so that the Solaris publisher is
connected to the new repository.
Refresh the application/pkg/server service.
Issue the pkgrepo refresh command to refresh the repository catalog
B. Configure the publisher on the client using the svcfg-s command so that the Solaris publisher is
connected to the repository at http://sysA.example.com
Refresh the application/pkg/server service.
Issuethe pkgrepo refresh command to repository catalog
C. Use the pkg set-publisher command to change the URL of the publisher Solaris to
http://sysA.example.com.
Issue the pkg update command to update the OS image.
D. Add the new publisher http://sysA.example.com Solaris
Use the pkg set-publisher command to set the publisher search order and place
http://sysA.example.com of http://pkg.oracle.com/solaris/release
Issue the pkg publisher command to view the publishers.
Set the new publisher to sticky.
Issue the pkg update command to update the OS image.
Answer: C

NO.10 Identify the Automated Installer s (AI) equivalent to jumpStart s finish scripts and sysidcfg files.
A. Manifest files
B. SMF system configuration profile files
C. Installadm create-client
D. IPS software package repository
E. installadm create-service
F. svccfg-s application/pkg/server setprop sysidcfg
Answer: B