IT업계 종사자라면 누구나   Citrix Other Certification 1Y0-731 (Citrix Netsoaler 8.0: Administration Exam)  시험을 패스하고 싶어하 리라고 믿습니다. 많은 분들이 이렇게 좋은 인증시험은 아주 어렵다고 생각합니다. 네 맞습니다. 패스할 확율은 아주 낮습니다. 노력하지 않고야 당연히 불가능한 일이 아니겠 습니까? Citrix Other Certification 1Y0-731 (Citrix Netsoaler 8.0: Administration Exam)  시험은 기초 지식 그리고 능숙한 전업지식이 필요 합니다. Pass4Test는 여러분들한테  Citrix Other Certification 1Y0-731 (Citrix Netsoaler 8.0: Administration Exam)  시험을 쉽게 빨리 패스할 수 있도록 도와주는 사이트입니다. Pass4Test의    Citrix Other Certification 1Y0-731 (Citrix Netsoaler 8.0: Administration Exam)  시험관련 자료로 여러분은 짧은 시간내에 간단하게 시험을 패스할수 있습니다. 시간도 절약하고 돈도 적게 들이는 이런 제안은 여러분들한테 딱 좋은 해결책이라고 봅니다.많은 분들은   Citrix Other Certification 1Y0-731 (Citrix Netsoaler 8.0: Administr ation Exam)  인증시험이 아주 어려운 것은 알고 있습니다. 하지만 Pass4Test를 선택함으로   Citrix Other Certification 1Y0-731 (Citrix Netsoaler 8.0: Administration Exam)  인증시험은 그렇게 어렵지 않다는 것을 알게 될 것입니다. Pass4Test의   Citrix Other Certification 1Y0-731 (Citrix Netsoaler 8.0: Administration Exam)    학습가이드는 시험의 예상문제부터 전면적이로 만들어진 아주 퍼펙트한 시험자료입니다. Pass4Test 의 서비스는    Citrix Other Certification 1Y0-731 (Citrix Netsoaler 8.0: Administration Exam)  구매 후 최신버전이 업데이트 시 최신문제와 답을 모두 무료로 제공합니다. Pass4Test에서는 응시자분들의 고민을 덜어드릴 수 있습니다. 빨리 성공하고 빨리   Citrix Other Certification 1Y0-731 (Citrix Netsoaler 8.0: Administration Exam)  인증시험을 패스하고 싶으시다면  Pass4Test를 찾아주세요. Pass4 Test제품은 여러분의 아주 좋은 학습가이드가 될것입니다. Pass4Test로 여러분은 소유하고 싶은 인증서를 빠른 시일내에 얻게 될것입니다.

 

 

NO.1 A company is planning on implementing NetScaler systems in High Availability pairs.
Which entry in the NS.CONF file of the secondary system needs to be unique from those of the primary
system?
A. VMAC
B. Node ID
C. MIP address
D. NSIP address
Answer: D

NO.2 A multinational company with two server farms wants to set-up a NetScaler system with High
Availability as shown in the attached exhibit without using content switching.
How many virtual IP addresses will the administrator need for the environment set up to work?
Click the Exhibit button to view the environment.
A. One
B. Two
C. Three
D. Four
Answer: B

NO.3 Scenario: An administrator is configuring monitoring for web servers in the environment that often
results in services being marked as DOWN because of slow back-end servers. The administrator wants to
configure the virtual server and services so that existing connections stay open when a service is marked
down but not when a virtual server is marked DOWN.
How must the administrator configure the service and virtual server to reflect this dependency?
A. set lb vserver lbv1 -downStateFlush DISABLED
set service svc1 -downStateFlush ENABLED
B. set lb vserver lbv1 -downStateFlush ENABLED
set service svc1 -downStateFlush ENABLED
C. set lb vserver lbv1 -downStateFlush DISABLED
set service svc1 -downStateFlush DISABLED
D. set lb vserver lbv1 -downStateFlush ENABLED
set service svc 1 -downStateFlush DISABLED
Answer: D

NO.4 Which two modes could a NetScaler system be deployed in if all traffic must pass through the
NetScaler? (Choose two.)
A. HA inline
B. HA one-arm
C. Stand-alone inline
D. Stand-alone one-arm
Answer: AC

NO.5 A large e-commerce company is planning on integrating NetScaler systems into their network
environment. The company requires that the original client IP addresses be recorded in the web server
logs.
Which two features on the NetScaler could accomplish this? (Choose two.)
A. USIP
B. RNAT
C. USNIP
D. Edge mode
E. Client IP insertion
Answer: AE

NO.6 Scenario: An administrator is planning on deploying a NetScaler system into a network environment
using SNMP. The administrator plans on enabling the 11 SNMP traps relating to request and response
rates.
Which two objects must the administrator configure in order for the SNMP traps to send alerts? (Choose
two.)
A. SNMP destination
B. Source IP address
C. Threshold levels for the traps
D. Additional IP addresses on which the SNMP service can respond to SNMP queries
Answer: AC

NO.7 Scenario: A company has distributed Internet sites and installations are spread across multiple
network locations and requires load balancing to be based on the client's proximity to the site, with the
least amount of configuration.
What must the administrator do to ensure GSLB uses the appropriate load balancing method?
A. Enable and configure Dynamic Proximity based Global Server Load Balancing.
B. Enable Dynamic Network Proximity based on the RTT of the client accessing the load balancing virtual
server.
C. Enable DNS view based Static Proximity through an Advanced expression to extract the client IP and
compare it to the subnet of the site.
D. Enable Proximity based Global Server Load Balancing and use the location's database to enter the
MAC address of all the clients and the corresponding site to which they should make the connection.
Answer: A

NO.8 Scenario: An administrator introduced two new servers into a server farm that can handle more traffic
than the older servers. The current load balancing method set for the virtual server managing the traffic
for this group of servers is Least Connections. The administrator wants to maintain the load balancing
method but also wants to use the new servers to improve performance by having them take more of the
traffic than the older servers.
Which advanced option must the administrator configure to achieve this?
A. Spillover
B. Max Client
C. Backup vserver
D. Service Weights
E. Global Setting Override
Answer: D

NO.9 Scenario: A company based in Beijing was unable to reach their data center for more than a week due
to a nearby earthquake. The company now has Distributed Data Centers in multiple regions, including a
disaster recovery center, to increase redundancy. The company wants their new NetScaler systems to
load balance these
centers.
Which NetScaler feature will allow load balancing across these centers only for redundancy?
A. Global Server Load Balancing to make load balancing decisions between the two sites
B. TCP-based content switching to make a decision between the load balance virtual servers
C. Proximity-based Global Server Load Balancing based on the RTT of client requests to virtual servers
D. SNMP load monitor bound to each location and bound to the default NetScaler metric table and with
the appropriate SNMP OIDs to load balance the different locations
Answer: A

NO.10 What must an administrator configure the NetScaler log to record in order to know when someone has
altered the system configurations?
A. Access logs
B. Event messages
C. System counters
D. Audited commands
Answer: D

NO.11 Which type of VLAN is used when an administrator leaves the NetScaler system interfaces on the
default VLAN?
A. Tagged
B. Port-based
C. MAC-based
D. Protocol-based
Answer: B

NO.12 Which option must an administrator enable on a NetScaler system to route packets that are not
destined for the NetScaler?
A. L2 mode
B. L3 mode
C. Static route advertisement
D. Dynamic route advertisement
Answer: B

NO.13 Scenario: A company is deploying a NetScaler system in a network environment with some subnets
open to the public Internet and one non-routable subnet. The administrator plans on enabling
Use-Subnet-IP mode and disabling Use-Source-IP mode.
Which two IP addresses can the administrator set as source IP addresses for connections to back-end
servers?
(Choose two.)
A. VIP
B. MIP
C. SNIP
D. NSIP
Answer: BC

NO.14 An administrator should configure Link Aggregation on a NetScaler system when __________.
(Choose the correct option to complete the sentence.)
A. redundancy on a half duplex operation is required
B. redundancy on an operation across multiple data rates is required
C. network connections between LAN switches and network servers require more than 1Gb/sec
D. network connections between LAN switches and network servers require more than 8 Gb/sec
Answer: C

NO.15 What does an administrator need to configure in order for a NetScaler system to advertise virtual IP
addresses, directly connected routes and static routes on the upstream routers?
A. Static Routes
B. Link Load Balancing
C. Route Health Injection
D. Front-end Health Check
Answer: C

NO.16 An administrator plans to configure a NetScaler system to resolve DNS queries using an external DNS
server with an IP address of 10.10.10.1.
Which command could the administrator use to configure this?
A. add nameserver DNS1 10.10.10.1
B. add lb vserver DNS1 dns 10.10.10.1
C. add server DNS1 10.10.10.1 -external
D. add nameserver DNS1 dns 10.10.10.1 -local
Answer: A

NO.17 Scenario: An administrator is planning to deploy NetScaler systems in an environment with multiple IP
subnets, one of which is non-routable. The company is an online retailer and needs outbound
connections from the non-routable subnet in order to verify credit cards.
What will an administrator need to configure to meet the company's requirements?
A. SIP
B. USIP
C. RNAT
D. USNIP
E. Layer 2 mode
Answer: C

NO.18 The auditing and security policy of a company requires that all transactions that can be logged must be
logged. Which option must an administrator configure a syslog server for to meet this requirement?
A. Device counters
B. System counters
C. HTTP transactions
D. Audited commands
Answer: D

NO.19 How many untagged VLANs can an administrator configure on a single interface?
A. 1
B. 2
C. 16
D. 256
E. 4,096
Answer: A

NO.20 An SNMP manager attempted to poll for an OID but received the error message: "response timeout."
Which two options could the administrator have misconfigured for SNMPv2 to cause this error message?
(Choose two.)
A. SNMP user
B. SNMP group
C. SNMP manager
D. SNMP community
Answer: CD