Pass4Test 는 꼭 한번에  Microsoft 070-457 시험을 패스할 수 있도록 도와드릴 것입니다. 여러분은  Microsoft 070-457  시험자료 구매로 제일 정확하고 또 최신 시험 문제에 대비한 학습가이드를 사용할 수 있습니다. Pass4Test의 인증시험 적중율은 아주 높습니다. 때문에 많은 IT인증시험 준비중인 분들에게 많은 편리를 드릴수 있습니다.100%정확도 100%신뢰! 여러분은 마음 편히 응시하시면 됩니다.Pass4Test는 여러분의 시간을 절약해드릴 뿐만 아니라 여러분들이 안심하고 응시하여 순조로이 패스할수 있도록 도와주는 사이트 입니다.Microsoft 070-457 인증시험 패스로 이 치열한 IT업계경쟁 속에서 자기만의 자리를 잡고, 스펙을 쌓고, 전문적인 지식을 높이고 싶으십니까?Microsoft 070-457  패스는 쉬운 일이 아닌걸 알고 있습니다. Microsoft 070-457 패스는 여러분이 IT업계에 한발작 더 가까워졌다는걸 의미합니다.하지만 이렇게 중요한 시험이라고 많은 시간과 정력을 낭비할 필요는 없습니다. Pass4Test의 완벽한 자료만으로도 가능합니다.Pass4Test는 믿을 수 있는 사이트입니다. IT업계에서는 이미 많이 알려져 있습니다. 그리고 여러분에 신뢰를 드리기 위하여  Microsoft 070-457  관련자료의 일부분 문제와 답 등 샘플을 무료로 다운받아 체험해볼 수 있게 제공합니다. 아주 만족할 것이라고 믿습니다.  Pass4Test제품에 대하여 아주 자신이 있습니다. Microsoft 070-457 도 여러분의 무용지물이 아닌 아주 중요한 자료가 되리라 믿습니다. 여러분께서는 아주 순조로이 시험을 패스하실 수 있을 것입니다.

 

 

NO.1 You are developing a database application by using Microsoft SQL Server 2012. An application that
uses a database begins to run slowly. Your investigation shows the root cause is a query against a
read-only table that has a clustered index.
The query returns the following six columns:
. One column in its WHERE clause contained in a non-clustered index
. Four additional columns
. One COUNT (*) column based on a grouping of the four additional columns
You need to optimize the statement. What should you do?
A. Add a HASH hint to the query.
B. Add a LOOP hint to the query.
C. Add a FORCESEEK hint to the query.
D. Add an INCLUDE clause to the index.
E. Add a FORCESCAN hint to the Attach query.
F. Add a columnstore index to cover the query.
G. Enable the optimize for ad hoc workloads option.
H. Cover the unique clustered index with a columnstore index.
I. Include a SET FORCEPLAN ON statement before you run the query.
J. Include a SET STATISTICS PROFILE ON statement before you run the query.
K. Include a SET STATISTICS SHOWPLAN_XML ON statement before you run the query.
L. Include a SET TRANSACTION ISOLATION LEVEL REPEATABLE READ statement before you run the
query.
M. Include a SET TRANSACTION ISOLATION LEVEL SNAPSHOT statement before you run the query.
N. Include a SET TRANSACTION ISOLATION LEVEL SERIALIZABLE statement before you run the
query.
Answer: F

NO.2 You create a table that has the StudentCode, SubjectCode, and Marks columns to record mid-year
marks for students. The table has marks obtained by 50 students for various subjects. You need to ensure
that the top half of the students arranged by their average marks must be given a rank of 1 and the
remaining students must be given a rank of 2.
Which Transact-SQL query should you use?
A. SELECT StudentCode as Code,
RANK ( ) OVER (ORDER BY AVG (Marks) DESC) AS Value FROM StudentMarks
GROUP BY StudentCode
B. SELECT Id, Name, Marks, DENSE_RANK () OVER (ORDER BY Marks DESC) AS Rank FROM
StudentMarks
C. SELECT StudentCode as Code,
DENSE_RANK () OVER (ORDER BY AVG (Marks) DESC) AS Value FROM StudentMarks
GROUP BY StudentCode
D. SELECT StudentCode as Code,
NTILE (2) OVER (ORDER BY AVG (Marks) DESC) AS Value FROM StudentMarks
GROUP BY StudentCode
E. SELECT StudentCode AS Code,Marks AS Value
FROM (SELECT StudentCode, Marks AS Marks,
RANK () OVER (PARTITION BY SubjectCode ORDER BY Marks ASC) AS Rank FROM StudentMarks)
tmp WHERE Rank = 1
F. SELECT StudentCode AS Code,Marks AS Value FRCM (
SELECT StudentCode, Marks AS Marks,
RANK() OVER (PARTITION BY SubjectCode ORDER 3Y Marks DESC) AS Rank FRCM StudentMarks)
tmp WHERE Rank = 1
G. SELECT StudentCode AS Code,Marks AS Value FROM
(SELECT StudentCode, Marks AS Marks,
RANK () OVER (PARTITION BY StudentCode ORDER BY Marks ASC) AS Rank FROM StudentMarks)
tmp WHERE Rank = 1
H. SELECT StudentCode AS Code,Marks AS Value FROM
(SELECT StudentCode, Marks AS Marks,
RANXO OVER (PARTITION BY StudentCode ORDER BY Marks DESC) AS Rank FROM StudentMarks)
tmp WHERE Rank = 1
Answer: D

NO.3 You create a table that has the StudentCode, SubjectCode, and Marks columns to record mid-year
marks for students. The table has marks obtained by 50 students for various subjects. You need to ensure
that the following requirements are met:
. Students must be ranked based on their average marks.
. If one or more students have the same average, incremental ranks must be given based on the order
they are created.
. Ranks must be sequential without gaps in between.
Which Transact-SQL query should you use?
A. SELECT StudentCode as Code, RANK ( ) OVER (ORDER BY AVG (Marks) DESC) AS Value FROM
StudentMarks GROUP BY StudentCode
B. SELECT Id, Name, Marks, DENSE_RANK () OVER (ORDER BY Marks DESC) AS Rank FROM
StudentMarks
C. SELECT StudentCode as Code, DENSE_RANK () OVER (ORDER BY AVG (Marks) DESC) AS Value
FROM StudentMarks GROUP BY StudentCode
D. SELECT StudentCode as Code, NTILE (2) OVER (ORDER BY AVG (Marks) DESC) AS Value FROM
StudentMarks GROUP BY StudentCode
E. SELECT StudentCode AS Code,Marks AS Value FROM (SELECT StudentCode, Marks AS Marks,
RANK () OVER (PARTITION BY SubjectCode ORDER BY Marks ASC) AS Rank FROM StudentMarks)
tmp WHERE Rank = 1
F. SELECT StudentCode AS Code,Marks AS Value FRCM ( SELECT StudentCode, Marks AS Marks,
RANK() OVER (PARTITION BY SubjectCode ORDER 3Y Marks DESC) AS Rank FRCM StudentMarks)
tmp WHERE Rank = 1
G. SELECT StudentCode AS Code,Marks AS Value FROM (SELECT StudentCode, Marks AS Marks,
RANK () OVER (PARTITION BY StudentCode ORDER BY Marks ASC) AS Rank FROM StudentMarks)
tmp WHERE Rank = 1
H. SELECT StudentCode AS Code,Marks AS Value FROM (SELECT StudentCode, Marks AS Marks,
RANXO OVER (PARTITION BY StudentCode ORDER BY Marks DESC) AS Rank FROM StudentMarks)
tmp WHERE Rank = 1
Answer: C

NO.4 You create a table that has the StudentCode, SubjectCode, and Marks columns to record mid-year
marks for students. The table has marks obtained by 50 students for various subjects.
You need to ensure that the following requirements are met:
. Students must be ranked based on their average marks.
. If one or more students have the same average, the same rank must be given to these students.
. Consecutive ranks must be skipped when the same rank is assigned.
Which Transact-SQL query should you use.?
A. SELECT StudentCode as Code, RANK ( ) OVER (ORDER BY AVG (Marks) DESC) AS Value FROM
StudentMarks GROUP BY StudentCode
B. SELECT Id, Name, Marks, DENSE_RANK () OVER (ORDER BY Marks DESC) AS Rank FROM
StudentMarks
C. SELECT StudentCode as Code, DENSE_RANK () OVER (ORDER BY AVG (Marks) DESC) AS Value
FROM StudentMarks GROUP BY StudentCode
D. SELECT StudentCode as Code, NTILE (2) OVER (ORDER BY AVG (Marks) DESC) AS Value FROM
StudentMarks GROUP BY StudentCode
E. SELECT StudentCode AS Code,Marks AS Value FROM (SELECT StudentCode, Marks AS Marks,
RANK () OVER (PARTITION BY SubjectCode ORDER BY Marks ASC) AS Rank FROM StudentMarks)
tmp WHERE Rank = 1
F. SELECT StudentCode AS Code,Marks AS Value FRCM ( SELECT StudentCode, Marks AS Marks,
RANK() OVER (PARTITION BY SubjectCode ORDER 3Y Marks DESC) AS Rank FRCM StudentMarks)
tmp WHERE Rank = 1
G. SELECT StudentCode AS Code,Marks AS Value FROM (SELECT StudentCode, Marks AS Marks,
RANK () OVER (PARTITION BY StudentCode ORDER BY Marks ASC) AS Rank FROM StudentMarks)
tmp WHERE Rank = 1
H. SELECT StudentCode AS Code,Marks AS Value FROM (SELECT StudentCode, Marks AS Marks,
RANXO OVER (PARTITION BY StudentCode ORDER BY Marks DESC) AS Rank FROM StudentMarks)
tmp WHERE Rank = 1
Answer: A

NO.5 You are developing a database application by using Microsoft SQL Server 2012. You have a query that
runs slower than expected. You need to capture execution plans that will include detailed information on
missing indexes recommended by the query optimizer.
What should you do?
A. Add a HASH hint to the query.
B. Add a LOOP hint to the query.
C. Add a FORCESEEK hint to the query.
D. Add an INCLUDE clause to the index.
E. Add a FORCESCAN hint to the Attach query.
F. Add a columnstore index to cover the query.
G. Enable the optimize for ad hoc workloads option.
H. Cover the unique clustered index with a columnstore index.
I. Include a SET FORCEPLAN ON statement before you run the query.
J. Include a SET STATISTICS PROFILE ON statement before you run the query.
K. Include a SET STATISTICS SHOWPLAN_XML ON statement before you run the query.
L. Include a SET TRANSACTION ISOLATION LEVEL REPEATABLE READ statement before you run the
query.
M. Include a SET TRANSACTION ISOLATION LEVEL SNAPSHOT statement before you run the query.
N. Include a SET TRANSACTION ISOLATION LEVEL SERIALIZABLE statement before you run the
query.
Answer: K