IT업계 종사자라면 누구나 CompTIA 220-801 (CompTIA A+ Certification Exam) 시험을 패스하고 싶어하리라고 믿습니다. 많은 분들이 이렇게 좋은 인증시험은 아주 어렵다고 생각합니다. 네 맞습니다. 패스할 확율은 아주 낮습니다. 노력하지 않고야 당연히 불가능한 일이 아니겠습니까?CompTIA 220-801 (CompTIA A+ Certification Exam) 시험은 기초 지식 그리고 능숙한 전업지식이 필요 합니다. Pass4Test는 여러분들한테 CompTIA 220-801 (CompTIA A+ Certification Exam) 시험을 쉽게 빨리 패스할 수 있도록 도와주는 사이트입니다.Pass4Test의 CompTIA 220-801 (CompTIA A+ Certification Exam) 시험관련 자료로 여러분은 짧은 시간내에 간단하게 시험을 패스할수 있습니다. 시간도 절약하고 돈도 적게 들이는 이런 제안은 여러분들한테 딱 좋은 해결책이라고 봅니다.Pass4Test 에서 제공하는 학습가이드에는 IT전문가들이 만들어낸 CompTIA 220-801 (CompTIA A+ Certification Exam) 인증시험의 완벽한 문제와 답들을 대비한 자료가 포함되어있습니다. Pass4Test에서는 IT업계에서의 높은 신뢰감으로 여러분들한테 100%보장을 드립니다. 믿음을 드리기 위하여 CompTIA 220-801 (CompTI A A+ Certification Exam) 관련자료의 일부분 문제와 답 등 샘플을 무료로 다운받아 체험해 볼수 있게 제공합니다.CompTIA 220-801 (Com pTIA A+ Certification Exam) 문제와 답을 체험하는 동시에 Pass4Test 제품 선택여부에 대하여 답이 나올 것입니다.Pass4Test 는 백프로 여러분들한테 편리함과 통과율을 보장 드립니다. 여러분이 안전하게 CompTIA 220-801 (CompTIA A+ Certification Exam) 시험을 패스할 수 있는 곳은 바로 Pass4Test입니다.인증시험을 패스하려면 시험대비 자료 선택은 필수입니다. Pass4Test의 전문가들은 모두 경험도 많고, 그들이 연구해낸 자료는 실제시험의 문제를 많이 적중하고 있습니다.
NO.1 Which of the following cable types has the MAXIMUM transfer rate of 1 Gbps?
A. CAT3
B. CAT5
C. CAT5e
D. CAT6
Answer: C
NO.2 Which of the following is the MAXIMUM transfer speed of USB 2.0?
A. 100 Mbps
B. 400 Mbps
C. 420 Mbps
D. 480 Mbps
Answer: D
NO.3 Which of the following features of Windows allows a device to have a default IP address if a
DHCP
server is not available?
A. APIPA
B. ARP
C. IPv6
D. DNS
Answer: A
NO.4 Which of the following is representative of a class C address type?
A. 10.15.1.4
B. 169.254.125.15
C. 172.20.15.5
D. 192.168.1.15
Answer: D
NO.5 Which of the following hard drive types would be considered the MOST likely to survive a
fall?
A. SCSI
B. Solid State
C. IDE
D. SATA
Answer: B
NO.6 Which type of fire extinguishing technology should be used when encountering an electrical
fire?
A. Class B fire extinguishers
B. Overhead sprinkler system
C. Water-based fire extinguishers
D. Non-water based extinguishers
Answer: D
NO.7 Which of the following tools are commonly used to remove dust and debris from inside a
computer?
(Select TWO).
A. Cotton and alcohol
B. Vacuum
C. Compressed air
D. Anti-bacterial surface cleaner
E. Feather duster
Answer: B,C
NO.8 Which of the following is the speed limitation for CAT3 wiring?
A. 1 Mbps
B. 10 Mbps
C. 100 Mbps
D. 1000 Mbps
Answer: B
NO.9 Which of the following types of RAM can be used in a dual channel configuration?
A. SDRAM
B. RAMBUS
C. DDR
D. DIMM
Answer: C
NO.10 Which of the following is a public IP address?
A. 10.0.0.1
B. 62.10.1.1
C. 172.16.0.1
D. 192.168.1.1
Answer: B
NO.11 Which of the following is the BEST way to explain RAID to a non-technical user?
A. RAID is a dynamic logical disk management system.
B. RAID uses multiple hard disks to increase performance and/or provide protection against data
loss.
C. RAID uses data striping to reduce hard drive write time and parity bits to reconstruct the data
from a
failed hard drive.
D. RAID stands for Redundant Array of Independent Disks .
Answer: B
NO.12 Which of the following wireless standards is backwards compatible with 802.11g?
A. 802.11a
B. 802.11b
C. 802.11n
D. 802.1q
Answer: C
NO.13 Which of the following will provide the BEST protection against power failures and data loss?
A. Auto-switching power supply
B. Uninterruptible power supply
C. Line conditioner
D. Surge suppressor
Answer: B
NO.14 Which of the following MUST be performed when installing a PCI sound card for use instead
of the
onboard sound?
A. Install drivers
B. Install additional memory
C. Configure the jumpers
D. Flash the BIOS
Answer: A
NO.15 A client wants a technician to install more RAM on their graphics workstation. The client has
provided a 4 GB SODIMM and had problems installing it.
Which of the following is the probable reason for this?
A. Graphic workstations require flash memory
B. The memory is incompatible for the workstation
C. Graphic workstations require solid state memory
D. The workstation has no available memory slots
Answer: B
NO.16 Which of the following ports MUST be open to connect to a PC using RDP.?
A. 21
B. 80
C. 443
D. 3389
Answer: D
NO.17 Which of the following are the MOST important factors to address when a technician is
choosing
the components for a CAD workstation? (Select THREE).
A. Large drive space allocation
B. Powerful sound card
C. Multiple network cards
D. Multiple large HD monitors
E. Powerful video card
F. Maximum RAM
G. Powerful processor
Answer: E,F,G
NO.18 Which of the following is the BEST protocol to use for securely transferring large files?
A. Telnet
B. SSH
C. SFTP
D. FTP
Answer: C
NO.19 Which of the following connector types is only used for Coaxial?
A. RJ-11
B. ST
C. F
D. RJ-45
Answer: C
NO.20 Which of the following display connections has 15-pins?
A. RGB
B. VGA
C. DVI
D. HDMI
Answer: B