IBM Certifed Systems Expert 000-221 (AIX 7 Administration ) 시험을 패스하여 자격증을 취득한다면 여러분의 미래에 많은 도움이 될것입니다.IBM Certifed Systems Expert 000-221 (AIX 7 Administration )시험 자격증은 it업계에서도 아주 인지도가 높고 또한 알아주는시험이며 자격증 하나로도 취직은 문제없다고 볼만큼 가치가 있는 자격증이죠.IBM Certifed Systems Expert 000-221 (AIX 7 Admini stration )시험은 여러분이 it지식 테스트 시험입니다.Pass4Test는 IBM Certifed Systems Expert 000-221 (AIX 7 Administration ) 시험에대하여 응시가이드를 해줄 수 있는 사이트입니다. Pass4Test는 여러분의 전업 지식을 업그레이드 시켜줄 수 있고 또한 한번에 IBM Certifed Systems Expert 000-221 (AIX 7 Administration )시험을 패스하도록 도와주는 사이트입니다. Pass4Test에서 제공하는자료들은 모두 it업계 전문가들이 자신의 지식과 끊임없는 경험등으로 만들어낸 퍼펙트한 자료들입니다. 품질과 정확도가  모두보장되는 문제집입니다.IBM Certifed Systems Expert 000-221 (AIX 7 Administration )시험은 여러분이 it지식을 한층 업할수 있는 시험이며 우리 또한 일년무료 업데이트 서비스를 제공합니다.Pass4Test를 선택함으로  여러분은 IBM Certifed Systems Expert 000-221 (AIX 7 Administration )시험을 한방에 패스할 수 있습니다.만약 시험에서 실패하시면  Pass4Test에서는 덤프비용 전액환불을약속합니다.

 

 

NO.1 How can an administrator enable the Workload Partitions Manager feature after AIX 7 has been
installed with the default options?
A. Change AIX License using chlicense -I command
B. Change AIX edition using chedition -e command
C. Change WPAR License using chwpar -I command
D. Change WPAR edition using chwpar-e command
Answer: B

NO.2 The cfgmgr command appears to be taking an excessive time to complete. The administrator was able
to quit the command and return to the command prompt. The administrator does not have access to the
managing HMC and unable to check for any LED codes.
How else can the cause of the observed delay be determined?
A. Review the latest entry within /var/log/cfgdb.out.
B. Start the syslog daemon before re-issuing the command.
C. Re-issue the command with the W flag.
D. Initiate the ledmon command from a separate session, then re-issue cfgmgr.
Answer: C

NO.3 Which AIX command will display the virtual SCSI slot number that is the parent of hdisk0?
A. Isdev
B. Iscfg
C. Isattr
D. Ismap
Answer: B

NO.4 What are key considerations when planning for Live Application Mobility?
A. The WPAR is an Application WPAR and both global environments are at the same AIX level
B. That the WPAR is checkpointable and both global environments are on the same subnet
C. The NFS services are running and applications are stopped
D. The NFS services are running and there is an HMC attached to both managed systems
Answer: B

NO.5 AIX has been installed on an LPAR with 32 GB of memory. What should be checked first, before
increasing the paging space beyond the default 512MB?
A. The maximum memory attribute in the LPAR profile.
B. Quantity and size of hosted filesystems.
C. Disk device distribution and utilization.
D. Paging requirements of applications that will be hosted.
Answer: D

NO.6 Before changing virtual memory settings, how can an administrator check the valid range of values for
a tuning parameter?
A. Iscfg-T
B. Isattr-R
C. vmtune-l
D. vmo-L
Answer: D

NO.7 After performing a NIM rte install, the administrator noticed that not all filesets are at the correct
Technology Level (TL). What action will help the administrator determine why the inconsistent fileset
levels were installed?
A. On the NIM server, run an Ippchk to identify if the Software Vital Product Data is valid.
B. On the NIM client, run oslevel command against the TL to identify missing prerequisites.
C. Run instfix command on NIM client to determine what filesets are inconsistent.
D. On the NIM server run the NIM IsIpp command to indentify downlevel filesets contained in the
lpp_source.
Answer: D

NO.8 How can an administrator disable Role Based Access Control (RBAC) in a WPAR?
A. Run chattr -E -I sys0 -a enhanced_RBAC=false Reboot the WPAR
B. Run the RBAC wizard and deselect 'Enable RBAC Reboot the system
C. Run chdev -I mywpar -a enhanced_RBAC=false Reboot the Global Environment
D. Run chwpar -a RBAC=false Reboot the WPAR
Answer: C

NO.9 Which TWO groups of actions will create a CDROM file system for device cd0 and mount this on /cdfs?
(Select 2)
A. cdutil-s-kcd0/cdfs mount /cdfs
B. Define cd0 mount point as /cdfs in file /etc/cdromd.conf startsrc -s cdromd cdmount cd0
C. Define cd0 mount point as /cdfs in /etc/filesystems as vfs type jfs2 mount /cdfs
D. crfs-vcdrfs-pro-d'cd0'-mVcdfs' mount /cdfs
E. mkfs-v/cdfs/dev/cd0 mount /cdfs
Answer: B,D

NO.10 Which technology provides the maximum amount of usable storage and resilience for a system with 6
physical volumes?
A. RAID 0
B. RAID 1
C. RAID 5
D. RAID 6
Answer: C

NO.11 What option will boot an LPAR directly from DVD media, without any user interaction required, when
starting the LPAR from the Hardware Management Console (HMC)?
A. Normal
B. Diagnostic with default boot list
C. System management services
D. Open firmware OK prompt
Answer: B

NO.12 An LPAR is configured with strict logical volume mirroring across two disks for resilience. The
administrator would like to ensure if one disk fails the volume group stays online. Which command will
ensure that the datavg volume group stays online?
A. varyonvg -n datavg
B. mirrorvg-Q-c 2 datavg
C. mklvcopy -e m -s y (each logical volume name) 2
D. chvg -Qn datavg
Answer: D

NO.13 An administrator needs to list/query the security attributes for the WPAR syswpar1. Which command
will do this?
A. Issecattr-W syswpar1
B. Issecconf-w syswpar1
C. Isattr-s syswpar1
D. Iswpar-S syswpar1
Answer: D

NO.14 What is the difference between deferred and concurrent firmware updates.?
A. Deferred firmware can be applied concurrently but contains updates that affect the internal program
load path, which are not activated until the next time the server is shut down and restarted.
B. Concurrent firmware must be done on all LPARs in the frame at the same time. Deferred firmware can
be loaded on each LPAR at a different time and only becomes active when the LPAR is shutdown and
restarted.
C. Deferred firmware can only be applied during an outage to the managed system as it will automatically
shut the managed system down during its installation.
D. Concurrent firmware is only for minor fixes to the system mircocode while deferred firmware contains
major fixes to the service processor.
Answer: A

NO.15 An administrator plans to duplicate the active rootvg on a given system to a spare disk that will be
migrated to newer hardware. Which flag on 'alt_disk_copy' must be used to reset user-defined device
configurations to defaults?
A. X
B. R
C. O
D. D
Answer: C

NO.16 New change control procedures dictate that system maintenance windows be shown to each user after
logging into the system using ssh or telnet. Updating which file or files will accomplish this task?
A. The message of the day file
B. The user default attributes file
C. User and admin system alert files
D. The var daily message files
Answer: A

NO.17 Which of the following is an AIX 7 Cluster Aware feature?
A. Cluster application load balancing
B. Cluster shared volume groups on the shared disk
C. Cluster IP addresses on the shared resource
D. Cluster configurations on the cluster repository disk
Answer: D

NO.18 The following information has been reported in an AIX error log:
How can the administrator prevent the error from reoccurring?
A. Create a secondary dump device greater than 266MB
B. Increase primary dump device size greater than 266MB
C. Increase /var" file system to ensure it has a minimum of 266MB free space
D. Increase "/var/adm/ras/livedump" file system to ensure it has a minimum of 266MB free space
Answer: C

NO.19 What is a requirement for Live Partition Mobility?
A. The network and disk must be virtual.
B. The disk must be virtual and a Logical Host Ethernet Adapter (LHEA) for network.
C. The client partition must be connected to a SAN.
D. The client partition must be set up as a 'Mover Service Partition ¯:.
Answer: A

NO.20 A host has a single virtual Ethernet adapter (ent0) configured with only a default PVID, and the
administrator is trying to determine why it cannot be used to reach any other system on the network. He
suspects that it may be caused by a problem in the VLAN configuration.
How would the administrator determine the VLAN for which the adapter was configured?
A. Use the command 'Isdev -I ent0' on the host to determine the port VLAN ID.
B. Use the command 'Isattr-EI ent0' on the host to determine the port VLAN ID.
C. Look on the HMC to determine which VLAN is configured for the adapter.
D. Examine the Shared Ethernet Adapter on the Virtual I/O Server to determine which VLAN the adapter
is using.
Answer: C