Pass4Test 에서 제공하는 학습가이드에는 IT전문가들이 만들어낸 IBM 000-423 (IBM Certified Solution Developer - Information Analyz er v8.5) 인증시험의 완벽한 문제와 답들을 대비한 자료가 포함되어있습니다. Pass4Test에서는 IT업계에서의 높은 신뢰감으로 여러분들한테 100%보장을 드립니다.  믿음을 드리기 위하여 IBM 000-423 (IBM Certified Solution Developer - Information Analyzer v8.5)  관련자료의 일부분 문제와 답 등 샘플을 무료로 다운받아 체험해 볼수 있게 제공합니다.IBM 000-423 (IBM Certified Solution Deve loper - Information Analyzer v8.5)  문제와 답을 체험하는 동시에 Pass4Test 제품 선택여부에 대하여 답이 나올 것입니다.Pass4Test 는 백프로 여러분들한테 편리함과 통과율을 보장 드립니다. 여러분이 안전하게 IBM 000-423 (IBM Certified Solution Developer - Information Analyzer v8.5) 시험을 패스할 수 있는 곳은 바로 Pass4Test입니다.인증시험을 패스하려면 시험대비 자료 선택은 필수입니다. Pass4Test의 전문가들은 모두 경험도 많고, 그들이 연구해낸 자료는 실제시험의 문제를 많이 적중하고 있습니다.

IT업계 종사자라면 누구나 IBM 000-423 (IBM Certified Solution Developer - Information Analyzer v8.5) 시험을 패스하고 싶어하리라고믿습니다. 많은 분들이 이렇게 좋은 인증시험은 아주 어렵다고 생각합니다. 네 맞습니다. 패스할 확율은 아주 낮습니다. 노력하지않고야 당연히 불가능한 일이 아니겠습니까?IBM 000-423 (IBM Certified Solution Developer - Information Analyzer v8.5) 시험은 기초지식 그리고 능숙한 전업지식이 필요 합니다. Pass4Test는 여러분들한테 IBM 000-423 (IBM Certified Solution Developer - Informa tion Analyzer v8.5)  시험을 쉽게 빨리 패스할 수 있도록 도와주는 사이트입니다. Pass4Test의  IBM 000-423 (IBM Certified Solution Developer - Information Analyzer v8.5) 시험관련 자료로 여러분은 짧은 시간내에 간단하게 시험을 패스할수 있습니다. 시간도 절약하고 돈도 적게 들이는 이런 제안은 여러분들한테 딱 좋은 해결책이라고 봅니다.

 

 

NO.1 You submitted a column analysis job with the "Retain Scripts" set to no. The column analysis job
finished with an "error encountered" final message. You have access to the DataStage Director client.
Which option would allow you to find the source of the error.?
A. Create a log view in Information Analyzer and rerun the job. Examine the log to determine the error.
B. Rerun the job with the "Retain Scripts" turned on. The error message will be returned to the Information
Analyzer status window.
C. Submit the job from Information Analyzer. After it finishes log onto DataStage Director and examine the
job log to determine the source of the error.
D. Submit the job from Information Analyzer and place it on hold. Log onto DataStage Director, release
the job and examine the job log to determine the source of the error.
Answer: A

NO.2 Which of the following is the correct HTTP API request format for creating a data rule definition in an
existing project?
A. http://<ServerName>:9080/InformationAnalyzer/create?ruleDefinition
B. http://<ServerName>:9080/InformationAnalyzer/create?projectContent
C.http://<ServerName>:9080/InformationAnalyzer/project?projectName=<YourProjectName>
D.http://<ServerName>:9080/InformationAnalyzer/ruleDefinition?projectName=<YourProjectName>&rule
Name=<YourRuleName>
Answer: B

NO.3 Which statement is true about analysis settings?
A. Default Analysis settings can be created for individual users.
B. Default Analysis settings cannot be configured for all projects.
C. Default Analysis settings can be configured at the project level.
D. Default Analysis settings are controlled by the DataStage Analysis project.
Answer: C

NO.4 When working with Information Analyzer reports, which two functions require use of the reporting
functionality in the Information Server Web Console? (Choose two.)
A. Add the report to Favorites.
B. Create the report as a PDF.
C. Grant Access to report result.
D. Create a Log Messages report.
E. Choose Expiration Policy for Report.
Answer: C,E

NO.5 You are managing a business analyst who is annotating column profile details with issues and
resolutions.
You wish to see how many annotations remain open for resolution. Which report should you create and
review?
A. Metric Summary Project Status report
B. Metadata Summary-Column Profile Status report
C. Project Status- Project Summary by Notes Status report
D. Domain Quality Summary- Column Quality by Status report
Answer: C

NO.6 When analyzing large volumes of source data in column analysis, which two statements identify ways
you can improve processing performance? (Choose two.)
A. Use data sampling in Information Analyzer.
B. Add more space to the Metadata repository.
C. Modify the project Analysis settings to increase the buffer pools.
D. Modify the DataStage apt config file to use multiple nodes and parallel process the data.
E. Modify the Information Analyzer Analysis database config file to parallel process the data.
Answer: A,D

NO.7 You are setting up an automated process to run a set of data rules on a weekly basis. You want to
evaluate the execution status via the Information Analyzer command line interface (CLI) before running
subsequent reports. Which of the following do you need to evaluate?
A. Select the -runTasks option specifying the -getExecutionStatus parameter and evaluate the status
attribute of the <RuleExecutionResult> element.
B. Select the -getExecutionHistory option specifying the -ruleName parameter and evaluate the status
attribute of the <RuleExecutionResult> element.
C. Select the -getExecutableRule option specifying the -getExecutionHistory and -ruleName parameters
and evaluate the status attribute of the <DataRuleResult> element.
D. Select the -getExecutableRule/ExecutionHistory option specifying the -ruleName parameter and
evaluate the status attribute of the <DataRuleExecutionHistory> element.
Answer: B

NO.8 While reviewing the results of a data rule test you find a logic error. Which option will allow you to
troubleshoot this error?
A. Set the debug option when submitting the test job, then review the log.
B. Open a command window on the client, submit the job and view the log.
C. Set Retain Scripts to on and use DataStage Director to review the job log.
D. Create a log view to capture the CAS log. Rerun the rule and review the log.
Answer: A

NO.9 You are installing Information Analyzer and plan to use Oracle as the Information Analyzer analysis
database.
Which statement is true?
A. The metadata database must also be Oracle.
B. The metadata database does not have to be Oracle.
C. Only Oracle RAC (Real Application Clusters) is supported.
D. The Information Analyzer analysis database can not be Oracle.
Answer: B

NO.10 You are working with a subject matter expert who does not have the Information Server console
installed, but needs to receive a detailed value frequency distribution as a comma-delimited (csv) file.
Which two of the following options can you use to deliver the required file? (Choose two.)
A. Go to the Investigate>Table Management functions, select the frequency distribution file; export as a
Delimited file; and send the file.
B. Go to the Investigate>Publish Analysis Result functions, select the frequency distribution file; export as
a Delimited file; and send the file.
C. Go to the Reports menu, select the Data Rule Frequency Distribution report; choose the TXT output
option and generate the report; and provide the URL to the report output.
D. Use the IAAdmin command line interface (CLI); select the -getColumnOutputTable option providing the
correct project and column names and the -csv format parameter; run the command and send the file.
E. Use the IAAdmin command line interface (CLI); select the -getFrequencyDistribution option providing
the correct project and column names and the -xsl format parameter to a csv-formatting stylesheet ; run
the command and send the file.
Answer: A,E

NO.11 Which of the following is true about ODBC DSN's (data source names)?
A. No ODBC DSN's are required.
B. You must manually create the Information Analyzer database DSN.
C. You must create a DSN for the data sources on both the client and server.
D. The Information Analyzer database DSN is automatically created at installation time.
Answer: B

NO.12 When creating a Scheduling View, which two of the following options can be configured? (Choose
two.)
A. Status > Schedule > Pending
B. Status > Task Run > Abnormally Ended
C. Status > Task Run > Successfully Ended
D. Origins > Information Analyzer > IA Export Project
E. Origins > Information Analyzer > IA Report Execution
Answer: B,D

NO.13 When analyzing large number of columns in Information Analyzer, which two components may require
capacity planning review? (Choose two.)
A. Disk space on the Engine layer.
B. Disk space on the Application Server.
C. Buffer pools on the Application Server.
D. Information Server Metadata repository.
E. Information Analyzer Analysis database.
Answer: A,E

NO.14 In a large enterprise, the human resource business unit wants to ensure the restriction of the analysis
and analysis results to a set of HR managers. Which configuration will support this requirement?
A. Use operating system IDs and database IDs to restrict access.
B. Use Information Server roles and security to restrict access to analysis and results.
C. Install an Information Analyzer environment (analysis server, analysis engine, analysis database) for
the HR business unit.
D. Install an analysis engine for each business unit and one analysis database using Information server
security to restrict access.
Answer: C

NO.15 You are trying to identify a multi-column primary key in a table of 50 million records. What steps can
you take to minimize performance impact?
A. None, you must always assess full volume of data.
B. Use a data sample; apply regression analysis to identify statistically likely candidates; apply duplicate
check.
C. Use a data sample; limit the test to specific columns at one time; incrementally increase the number of
possible column combinations.
D. Use a data sample; apply functional dependency analysis to remove dependent columns;
incrementally increase the number of possible column combinations.
Answer: C