Pass4Test 는 인증시험에 참가하는 분들한테 편리를 제공하는 사이트이며,여러분들의 시험패스에 도움을 줄 수 있는 사이트입니다.많은 분들은   HP Certification III HP2-T16 (Industry Standard Architecture and Technology)   인증시험이 아주 어려운 것은 알고 있습니다. 하지만 Pass4Test를 선택함으로   HP Certification III HP2-T16 (Industry Standard Architecture and Technology)  인증시험은 그렇게 어렵지 않다는 것을 알게 될 것입니다. Pass4Test의    HP Certification III HP2-T16 (Industry Standard Archite cture and Technology)   학습가이드는 시험의 예상문제부터 전면적이로 만들어진 아주 퍼펙트한 시험자료입니다. Pass4Test 의 서비스는  HP Certification III HP2-T16 (Industry Standard Architecture and Technology)  구매 후 최신버전이 업데이트 시 최신문제와 답을 모두 무료로 제공합니다. Pass4Test에서는 응시자분들의 고민을 덜어드릴 수 있습니다. 빨리 성공하고 빨리  HP Certification III HP2-T16 (Industry Standard Architecture and Technology)  인증시험을 패스하고 싶으시다면  Pass4Test를 찾아주세요.Pass4Test제품은 여러분의 아주 좋은 학습가이드가 될것입니다.

 

 

NO.1 What must you check prior to adding another processor to an existing system.? (Select Three)
A. amount of memory in the system
B. compatibility of the new processor with existing processors
C. firmware requirements for the new processor
D. number of users currently logged into the system
E. number of processors the operating system supports
F. weight of the new processor
Answer: BCE

NO.2 Your RAID 5 array on a Smart Array sustains a drive failure. A host spare replaces the failed drive
and rebuilds successfully. After replacing the failed drive with a new drive, what happens next?
A. The spare drive replicates its data to the new drive and both work as a mirror until you evict the spare
drive.
B. The new drive stays offline until you assign it to the array, at which point it automatically takes the place
of the spare drive.
C. The new drive re-assumes its place in the RAID set and after data rebuild is complete, the drive that
was the spare once again becomes a hot spare drive.
D. The new drive becomes a spare drive and you must go to the ACU to remove the old spare drive and
then re-add the new drive to the array.
Answer: C

NO.3 Into which range do reserved TCP/IP server ports generally fall?
A. 0-1023
B. 1-512
C. 21-80
D. 1024-8080
Answer: A

NO.4 Which port type does a host server use when connected to an FC-SAN?
A. N_Port
B. E_Port
C. G_Port
D. F_Port
Answer: A

NO.5 Why should server firmware be updated to the most recent version? (Select two)
A. to maintain a valid warranty
B. to fix problems from earlier versions
C. to support new features
D. to refresh changes that a user has edited in the existing firmware
E. to support leagcy features
Answer: BC

NO.6 Which Network Operating System (NOS) filesystem allows you to set security on invididual files?
A. FAT32
B. FAT
C. NTFS
D. CDFS
Answer: C

NO.7 What must you check prior to adding another processor to an existing system? (Select Three)
A. amount of memory in the system
B. compatibility of the new processor with existing processors
C. firmware requirements for the new processor
D. number of users currently logged into the system
E. number of processors the operating system supports
F. weight of the new processor
Answer: BCE

NO.8 You are comparing similar versions of Intel Xeon and AMD Opteron processors. Which statements are
true about these processors? (Select two)
A. Opteron processors use a Northbridge that operates at core bus speed.
B. AMD Opteron processors are optimized for virtualization and AMD-V technology.
C. An Intel Xeon processor uses HyperTransport link to access its memory.
D. Intel Xeon processors are optimized for virtualization with Intel VT technology.
E. An AMD Opteron processors uses QuickPath Interconnect to access its memory.
Answer: BD

NO.9 What does a system require to achieve PCI Hot Plug capability? (Select three)
A. hot-plug fans
B. hog-plug operating systems
C. hot-plug adapter drivers
D. hot-plug memory
E. hot-plug system tray
F. hot-plug platform
Answer: BCF

NO.10 Which statements are true about AMD 2P or 4P system architecture? (Select three)
A. Requests for memory access are handle by the Northbridge ASIC.
B. Memory must be installed in banks corresponding to the installed processors.
C. Each processor has its own memory controller
D. The maximum amount of memory can be installed, regardless of the number of installed processors.
E. Requests for memory access are handle directly by the corresponding processor and relayed through
the HyperTransport link.
F. Communications between CPU and memory is handle through the QuickPath Interconnect.
Answer: BCE

NO.11 What can you do to optimize memory performance?
A. Enable Advanced Memory Buffer.
B. Rearrange existing memory to allow interleaving.
C. Implement memory caching
D. Configure processor interleaving.
Answer: B

NO.12 Which server filters outgoing network requests?
A. FTP
B. Proxy
C. DNS
D. WINS
Answer: B

NO.13 Which command can be used to verify connectivity to a client machine?
A. ping
B. nslookup
C. nbstat
D. ipconfig
Answer: A

NO.14 Which technology should you implement for disk redundancy?
A. SATA
B. NTFS
C. RAID
D. SCSI
Answer: C

NO.15 Which major challenges of I/O virtualization do Virtual Machine Managers need to address? (Select
two)
A. WWN virtualization
B. DMA virtualization
C. IRQ virtualization
D. port virtualization
E. MAC virtualization
Answer: AE

NO.16 How does single-mode fiber compare with multimode fiber?
A. Single mode fiber has a higher bandwidth and lower loss.
B. Multimode fiber has a higher bandwidth and lower loss.
C. Multimode fiber is more often used for long-distance telecommunications.
D. Single-mode fiber has higher loss and lower bandwidth.
Answer: A

NO.17 What happens when you install a 66Mhz, 32-bit PCI card in a 33MHz, 64-bit PCI slot?
A. The 66MHz, 32-bit card operates at 33MHz in 64-bit mode.
B. The 66MHz, 32-bit card operates at 66MHz in 32-bit mode.
C. All 33MHz, 64-bit cards on the PCI bus operate like 33MHz, 32-bit cards.
D. The 66MHz card operates at 33MHz.
Answer: D

NO.18 Which Network Operating System (NOS) security practices are commonly used when planning server
management? (Select three)
A. disable FTP and SSH
B. install hardware and software firewalls
C. disable unused TCP/IP service ports
D. use easy to remember password
E. enforce regular password changes
Answer: BCE

NO.19 A customer is running a single-threaded application and experiences performance problems connected
with the processor subsystem. How would you solve this issue?
A. Change processor affinity to enable splitting single threads into multiple threads
B. Add additional processors
C. Upgrade the processor with a higher frequency processor.
D. Replace the processor with a higher stepping processor
E. Upgrade the processor with a multi-core processor.
F. Enable the integrated memory controller of the process at the BIOS.
Answer: C

NO.20 What is the virtual machine instance commonly called?
A. guest
B. host
C. partition
D. hypervisor
Answer: A