Pass4Test에서는 이미    MCTS 70-680 (TS:Windows 7,Configuring)  인증시험의 일부 문제와 답을 사이트에 올려놓았으니 체험해보실 수 있습니다. Pass4Test 의   MCTS 70-680 (TS:Windows 7,Configuring) 덤프에 신뢰가 갈 것이며 또 망설임 없이 선택하게 될 것입니다.  Pass4Test  덤프로 여러분은 한번에 시험을 패스할 수 있으며 또 개인시간도 절약하고 무엇보다도 금전상으로 절약이 제일 크다고 봅니다.여러분은    MCTS 70-680 (TS:Windows 7,Configuring)  인증시험 패스로 이 치열한 IT업계경쟁 속에서 자기만의 자리를 잡고, 스펙을 쌓고, 전문적인 지식을 높이고 싶으십니까?    MCTS 70-680 (TS:Windows 7,Configuring)  패스는 쉬운 일이 아닌걸 알고 있습니다. MCTS 70-680 (TS:Windows 7,Configuring) 패스는 여러분이 IT업계에 한발작 더 가까워졌다는걸 의미합니다.하지만 이렇게 중요한 시험이라고 많은 시간과 정력을 낭비할 필요는 없습니다. Pass4Test의 완벽한 자료만으로도 가능합니다.Pass4Test의 덤프들은 모두 전문적으로IT관련인증시험에 대하여 연구하여 만들어진것입니다.Pass4Test 안에는 아주 거대한 IT업계 엘리트들로 이루어진 그룹이 있습니다. 그들은 모두 관련 업계에서 권위가 있는 전문가들이고 자기만의 지식과 지금까지의 경험으로 최고의 IT인증 관련 자료를 만들어냅니다. Pass4Test의 문제와 답은 정확도가 아주 높으며 한번에 패스할수 있는 100%의 보장도를 자랑하며 그리고 또 일년무료 업데이트를 제공합니다.

 

 

NO.1 You have a computer that runs Windows 7. You have a system image of the computer. You need to
restore a single file from the system image. You must achieve this goal in the minimum amount of time.
What should you do first?
A. From Disk Management, select Attach VHD.
B. From Backup and Restore, select Restore my files.
C. Restart the computer and run System Restore.
D. Restart the computer and run System Image Recovery.
Answer: A

NO.2 You have a computer that runs Windows 7. You add a new hard disk drive to the computer and create a
new NTFS partition. You need to ensure that you can use the Previous Versions feature on the new drive.
What should you do?
A. From Disk Management, convert the new disk to a dynamic disk.
B. From System Properties, configure the System Protection settings.
C. From System and Security, enable BitLocker Drive Encryption (BitLocker).
D. From the properties of the new drive, create a share and modify the caching settings.
Answer: B

NO.3 You have a computer that runs Windows Vista (x86). You need to perform a clean installation of
Windows 7 (64-bit). What should you do?
A. From the Windows 7 installation media, run Rollback.exe.
B. From the Windows 7 installation media, run Migsetup.exe.
C. Start the computer from the Windows 7 installation media. From the Install Windows dialog box, select
the Upgrade option.
D. Start the computer from the Windows 7 installation media. From the Install Windows dialog box, select
the Custom (advanced) option.
Answer: D

NO.4 You have a computer that runs Windows 7. The computer has a single volume. You install 15
applications and customize the environment.
You complete the following actions:
* Create an export by using Windows Easy Transfer.
* Create a system image by using Backup and Restore.
* Install the User State Migration Tool (USMT) and run Scanstate. The disk on the computer fails.
* You replace the disk.
* You need to restore the environment to the previous state.
What should you do?
A. Install Windows 7, install USMT, and then run Loadstate.
B. Install Windows 7 and then import the Windows Easy Transfer package.
C. Start the computer from a Windows Recovery Environment (Windows RE) disk and then run
Bcdboot.exe.
D. Start the computer from a Windows Recovery Environment (Windows RE) disk and then restore the
system image.
Answer: D

NO.5 You have a computer that runs Windows 7. You need to identify how much disk space is occupied by
previous versions. What should you do?
A. At a command prompt, run Diskpart.
B. At a command prompt, run Vaultcmd.
C. From System, view the System Protection settings.
D. From the properties of drive C, view the previous versions settings.
Answer: C

NO.6 You have a computer that runs Windows Vista Service Pack 2 (SP2). You need to upgrade the
computer to Windows 7. What should you do?
A. Start the computer from the Windows 7 installation media and select the Upgrade option.
B. Start the computer from the Windows 7 installation media and select the Custom (advanced) option.
C. From Windows Vista, run Setup.exe from the Windows 7 installation media and select the Upgrade
option.
D. From Windows Vista, run Setup.exe from the Windows 7 installation media and select the Custom
(advanced) option.
Answer: C

NO.7 You have a computer that runs Windows 7 Professional. A USB disk is attached to the computer. You
need to ensure that you can enable BitLocker To Go on the USB disk. What should you do?
A. Enable Encrypting File System (EFS).
B. Upgrade the computer to Windows 7 Enterprise.
C. Initialize the Trusted Platform Module (TPM) hardware.
D. Obtain a client certificate from an enterprise certification authority (CA).
Answer: B

NO.8 A user reports that he is unable to start his computer. He provides the following information:
* The boot partition is encrypted by using BitLocker Drive Encryption (BitLocker).
* The user cannot locate his BitLocker recovery key.
* You need to start Windows 7 on the computer.
The solution must use the minimum amount of administrative effort. What should you do?
A. From the BIOS, disable the Trusted Platform Module (TPM).
B. Start the computer from the Windows 7 installation media and select Install now.
C. Start the computer from the Windows 7 installation media and select Repair your computer.
D. Start the computer from the Windows 7 installation media, press SHIFT+F10, and then run CHKDSK.
Answer: B

NO.9 You have a computer that has the following hardware configuration:
* 1.6-gigahertz (GHz) processor (64-bit).
* 8-GB RAM.
* 500-GB hard disk.
* Graphics card that has 128-MB RAM.
You need to select an edition of Window 7 to meet the following requirements:
* Support DirectAccess
* Support Windows XP Mode
* Use all of the installed memory
* Support joining an Active Directory domain
Which edition should you choose?
A. Windows 7 Enterprise (64-bit)
B. Windows 7 Enterprise (x86)
C. Windows 7 Professional (64-bit)
D. Windows 7 Ultimate (x86)
Answer: A

NO.10 You perform a clean installation of Windows 7 on a computer. You need to ensure that you can run
Windows XP Mode in Windows 7. What should you do?
A. Enable hardware-assisted virtualization.
B. Create a Data Execution Prevention (DEP) exception.
C. Install Windows XP in the same partition as Windows 7.
D. Install Windows XP in a different partition than Windows 7.
Answer: A

NO.11 You have a computer that runs Windows Vista. You install Windows 7 on a new partition on the
computer. You need to ensure that the computer always starts Windows Vista by default. What should you
do?
A. Run Bcdedit.exe and specify the /default parameter.
B. Run Bcdedit.exe and specify the /bootems parameter.
C. Create a boot.ini file in the root of the Windows 7 partition.
D. Create a boot.ini file in the root of the Windows Vista partition.
Answer: A

NO.12 You need to reduce the amount of space currently being used to store system restore points. What
should you do?
A. Run Disk Cleanup.
B. Run Msconfig.exe.
C. Configure disk quotas.
D. Configure Windows Backup.
Answer: A

NO.13 You have a computer that runs Windows XP. The computer has one basic disk that contains a single
partition. The partition has 30 GB of free space. The hard disk has 5 GB of unallocated space. You need
to install Windows 7 in a dual-boot configuration. Windows 7 must not be installed in a virtual hard disk
(VHD). What should you do first?
A. Create a second partition.
B. Shrink the primary partition.
C. Convert the hard disk to a GPT disk.
D. Convert the hard disk to a dynamic disk.
Answer: B

NO.14 You need to back up your Encrypting File System (EFS) certificate. You must achieve this goal in the
minimum amount of time. What should you do?
A. Run Cipher.exe /x.
B. Run Ntbackup.exe /p.
C. From Backup and Restore, click Back up now.
D. From Backup and Restore, click Create a system image.
Answer: A

NO.15 You plan to install Windows 7 on a computer that contains a single hard disk drive. The hard disk drive
is connected to a RAID controller. During the installation, you discover that the Windows 7 installation
media does not include the files required to install the RAID controller. You need ensure that you can
install Windows 7 on the hard disk drive. What should you do?
A. Insert the Windows installation media and press F8 during the computer's power-on self test (POST).
B. Insert the Windows installation media and press F6 during the computer's power-on self test (POST).
C. Start the computer from the Windows installation media. From the Install Windows dialog box, click
Load Driver.
D. Start the computer from the Windows installation media. From the Install Windows dialog box, click
Drive options (advanced).
Answer: C

NO.16 You are evaluating the purchase a netbook computer that has the following hardware:
*1.6-gigahertz (GHz)
*32-bit processor
*1024-MB RAM
*1 video card that uses shared memory
*4-GB solid state drive.
You need to ensure that you can install Windows 7 Enterprise on the netbook computer.
Which hardware component should you change?
A. hard disk
B. processor
C. RAM
D. video card
Answer: A

NO.17 You have a computer that is certified for Windows 7. You need to install Windows 7 on the computer.
The installation method must prevent you from being prompted for information during the installation.
What should you do?
A. Create an unattend.txt file on a removable drive. Start the computer from the Windows 7 installation
media.
B. Create an autounattend.xml file on a removable drive. Start the computer from the Windows 7
installation media.
C. Start the computer from the Windows 7 installation media. At the command prompt, run Setup.exe and
specify the /m parameter.
D. Start the computer from the Windows 7 installation media. At the command prompt, run Setup.exe and
specify the /tempdrive parameter.
Answer: B

NO.18 You have a computer that runs Windows 7. You manually create a system restore point. You need to
restore a copy of a file stored on drive C from two days ago. You must achieve this goal in the minimum
amount of time. What should you do?
A. From Recovery, select System Restore.
B. From Backup and Restore, select Restore my files.
C. From the command prompt, run Wbadmin get items.
D. From the properties of the file, select Previous Versions.
Answer: D

NO.19 You have a computer that runs Windows 7. The computer has System Protection enabled. You need to
retain only the last System Protection snapshot of the computer. All other snapshots must be deleted.
What should you do?
A. Run Disk Cleanup for Programs and Features.
B. Run Disk Cleanup for System Restore and Shadow Copies.
C. From the System Protection Restore settings, select Turn off System Restore.
D. From the System Protection Restore settings, select Only restore previous versions of files.
Answer: B

NO.20 You have a computer that contains a DVD drive and a single 350-GB hard disk drive. You attempt to
install Windows 7 on the computer by using the DVD installation media and receive the following error
message: Reboot and Select proper Boot device or Insert Boot Media in selected Boot device. You need
to ensure that you can install Windows 7 on the computer by using the DVD installation media. What
should you do?
A. From the BIOS, modify the startup order.
B. From the BIOS, enable Pre-Boot Execution Environment (PXE).
C. Create an answer file named oobe.xml and place the file on the hard disk drive.
D. Create an answer file named autounattend.xml and place the file on the hard disk drive.
Answer: A