우리 Pass4Test 에는 최신의  Microsoft  MCTS 70-680 (TS:Windows 7,Configuring)  학습가이드가 있습니다. Pass4Test의 부지런한  IT전문가들이 자기만의 지식과 끊임없는 노력과 경험으로   제작한 최고의  Microsoft  MCTS 70-680 (TS:Windows 7,Configuring)  학습자료로 Microsoft  MCTS 70-680 (TS:Windows 7,Configuring)  인증시험을 응시하실 수 있습니다.  Microsoft  MCTS 70-680 (TS:Windows 7,Config uring)  인증시험은 IT업계에서의 비중은 아주 큽니다. 시험 신청하시는 분들도 많아지고 또 많은 분들이 우리 Pass4Test의 Microsoft  MCTS 70-680 (TS:Windows 7,Configuring)  자료로 시험을 패스했습니다. 이미 패스한 분들의 리뷰가 우리 Pass4Test의 제품의 중요함과 정확함을 증명할수 있습니다. Microsoft  MCTS 70-680 (TS:Windows 7,Configuring)  시험을 응시하고 싶으시다면 우리의 최신 Microsoft  MCTS 70-680 (TS:Windows 7,Configuring)  자료로 시험을 준비하시면 됩니다. Pass4Test 의 학습가이드에는  Microsoft  MCTS 70-680 (TS:Windows 7,Configuring) 인증시험의 예상문제, 시험문제와 답이 포함되어 있음으로 100% 시험을 패스할 수 있습니다.Pass4Test는 일년무료 업데이트서비스를 제공합니다.우리 Pass4Test가 제공하는 최신, 최고의   Microsoft  MCTS 70-680 (TS:Windows 7,Configuring)  시험관련 자료를 선택함으로 여러분은 이미 시험패스 성공이라고 보실수 있습니다.

 

 

NO.1 A user reports that he is unable to start his computer. He provides the following information:
* The boot partition is encrypted by using BitLocker Drive Encryption (BitLocker).
* The user cannot locate his BitLocker recovery key.
* You need to start Windows 7 on the computer.
The solution must use the minimum amount of administrative effort. What should you do?
A. From the BIOS, disable the Trusted Platform Module (TPM).
B. Start the computer from the Windows 7 installation media and select Install now.
C. Start the computer from the Windows 7 installation media and select Repair your computer.
D. Start the computer from the Windows 7 installation media, press SHIFT+F10, and then run CHKDSK.
Answer: B

NO.2 You have a computer that has the following hardware configuration:
* 1.6-gigahertz (GHz) processor (64-bit).
* 8-GB RAM.
* 500-GB hard disk.
* Graphics card that has 128-MB RAM.
You need to select an edition of Window 7 to meet the following requirements:
* Support DirectAccess
* Support Windows XP Mode
* Use all of the installed memory
* Support joining an Active Directory domain
Which edition should you choose?
A. Windows 7 Enterprise (64-bit)
B. Windows 7 Enterprise (x86)
C. Windows 7 Professional (64-bit)
D. Windows 7 Ultimate (x86)
Answer: A

NO.3 You need to back up your Encrypting File System (EFS) certificate. You must achieve this goal in the
minimum amount of time. What should you do?
A. Run Cipher.exe /x.
B. Run Ntbackup.exe /p.
C. From Backup and Restore, click Back up now.
D. From Backup and Restore, click Create a system image.
Answer: A

NO.4 You have a computer that runs Windows 7. You need to identify how much disk space is occupied by
previous versions. What should you do?
A. At a command prompt, run Diskpart.
B. At a command prompt, run Vaultcmd.
C. From System, view the System Protection settings.
D. From the properties of drive C, view the previous versions settings.
Answer: C

NO.5 You have a computer that runs Windows 7. You manually create a system restore point. You need to
restore a copy of a file stored on drive C from two days ago. You must achieve this goal in the minimum
amount of time. What should you do?
A. From Recovery, select System Restore.
B. From Backup and Restore, select Restore my files.
C. From the command prompt, run Wbadmin get items.
D. From the properties of the file, select Previous Versions.
Answer: D

NO.6 You have a computer that contains a DVD drive and a single 350-GB hard disk drive. You attempt to
install Windows 7 on the computer by using the DVD installation media and receive the following error
message: Reboot and Select proper Boot device or Insert Boot Media in selected Boot device. You need
to ensure that you can install Windows 7 on the computer by using the DVD installation media. What
should you do?
A. From the BIOS, modify the startup order.
B. From the BIOS, enable Pre-Boot Execution Environment (PXE).
C. Create an answer file named oobe.xml and place the file on the hard disk drive.
D. Create an answer file named autounattend.xml and place the file on the hard disk drive.
Answer: A

NO.7 You need to reduce the amount of space currently being used to store system restore points. What
should you do?
A. Run Disk Cleanup.
B. Run Msconfig.exe.
C. Configure disk quotas.
D. Configure Windows Backup.
Answer: A

NO.8 You have a computer that runs Windows Vista (x86). You need to perform a clean installation of
Windows 7 (64-bit). What should you do?
A. From the Windows 7 installation media, run Rollback.exe.
B. From the Windows 7 installation media, run Migsetup.exe.
C. Start the computer from the Windows 7 installation media. From the Install Windows dialog box, select
the Upgrade option.
D. Start the computer from the Windows 7 installation media. From the Install Windows dialog box, select
the Custom (advanced) option.
Answer: D

NO.9 You have a computer that runs Windows XP. The computer has one basic disk that contains a single
partition. The partition has 30 GB of free space. The hard disk has 5 GB of unallocated space. You need
to install Windows 7 in a dual-boot configuration. Windows 7 must not be installed in a virtual hard disk
(VHD). What should you do first?
A. Create a second partition.
B. Shrink the primary partition.
C. Convert the hard disk to a GPT disk.
D. Convert the hard disk to a dynamic disk.
Answer: B

NO.10 You have a computer that runs Windows Vista. You install Windows 7 on a new partition on the
computer. You need to ensure that the computer always starts Windows Vista by default. What should you
do?
A. Run Bcdedit.exe and specify the /default parameter.
B. Run Bcdedit.exe and specify the /bootems parameter.
C. Create a boot.ini file in the root of the Windows 7 partition.
D. Create a boot.ini file in the root of the Windows Vista partition.
Answer: A

NO.11 You have a computer that runs Windows 7. You add a new hard disk drive to the computer and create a
new NTFS partition. You need to ensure that you can use the Previous Versions feature on the new drive.
What should you do?
A. From Disk Management, convert the new disk to a dynamic disk.
B. From System Properties, configure the System Protection settings.
C. From System and Security, enable BitLocker Drive Encryption (BitLocker).
D. From the properties of the new drive, create a share and modify the caching settings.
Answer: B

NO.12 You perform a clean installation of Windows 7 on a computer. You need to ensure that you can run
Windows XP Mode in Windows 7. What should you do?
A. Enable hardware-assisted virtualization.
B. Create a Data Execution Prevention (DEP) exception.
C. Install Windows XP in the same partition as Windows 7.
D. Install Windows XP in a different partition than Windows 7.
Answer: A

NO.13 You have a computer that runs Windows 7. The computer has a single volume. You install 15
applications and customize the environment.
You complete the following actions:
* Create an export by using Windows Easy Transfer.
* Create a system image by using Backup and Restore.
* Install the User State Migration Tool (USMT) and run Scanstate. The disk on the computer fails.
* You replace the disk.
* You need to restore the environment to the previous state.
What should you do?
A. Install Windows 7, install USMT, and then run Loadstate.
B. Install Windows 7 and then import the Windows Easy Transfer package.
C. Start the computer from a Windows Recovery Environment (Windows RE) disk and then run
Bcdboot.exe.
D. Start the computer from a Windows Recovery Environment (Windows RE) disk and then restore the
system image.
Answer: D

NO.14 You are evaluating the purchase a netbook computer that has the following hardware:
*1.6-gigahertz (GHz)
*32-bit processor
*1024-MB RAM
*1 video card that uses shared memory
*4-GB solid state drive.
You need to ensure that you can install Windows 7 Enterprise on the netbook computer.
Which hardware component should you change?
A. hard disk
B. processor
C. RAM
D. video card
Answer: A

NO.15 You have a computer that runs Windows Vista Service Pack 2 (SP2). You need to upgrade the
computer to Windows 7. What should you do?
A. Start the computer from the Windows 7 installation media and select the Upgrade option.
B. Start the computer from the Windows 7 installation media and select the Custom (advanced) option.
C. From Windows Vista, run Setup.exe from the Windows 7 installation media and select the Upgrade
option.
D. From Windows Vista, run Setup.exe from the Windows 7 installation media and select the Custom
(advanced) option.
Answer: C

NO.16 You have a computer that runs Windows 7. You have a system image of the computer. You need to
restore a single file from the system image. You must achieve this goal in the minimum amount of time.
What should you do first?
A. From Disk Management, select Attach VHD.
B. From Backup and Restore, select Restore my files.
C. Restart the computer and run System Restore.
D. Restart the computer and run System Image Recovery.
Answer: A

NO.17 You plan to install Windows 7 on a computer that contains a single hard disk drive. The hard disk drive
is connected to a RAID controller. During the installation, you discover that the Windows 7 installation
media does not include the files required to install the RAID controller. You need ensure that you can
install Windows 7 on the hard disk drive. What should you do?
A. Insert the Windows installation media and press F8 during the computer's power-on self test (POST).
B. Insert the Windows installation media and press F6 during the computer's power-on self test (POST).
C. Start the computer from the Windows installation media. From the Install Windows dialog box, click
Load Driver.
D. Start the computer from the Windows installation media. From the Install Windows dialog box, click
Drive options (advanced).
Answer: C

NO.18 You have a computer that is certified for Windows 7. You need to install Windows 7 on the computer.
The installation method must prevent you from being prompted for information during the installation.
What should you do?
A. Create an unattend.txt file on a removable drive. Start the computer from the Windows 7 installation
media.
B. Create an autounattend.xml file on a removable drive. Start the computer from the Windows 7
installation media.
C. Start the computer from the Windows 7 installation media. At the command prompt, run Setup.exe and
specify the /m parameter.
D. Start the computer from the Windows 7 installation media. At the command prompt, run Setup.exe and
specify the /tempdrive parameter.
Answer: B

NO.19 You have a computer that runs Windows 7. The computer has System Protection enabled. You need to
retain only the last System Protection snapshot of the computer. All other snapshots must be deleted.
What should you do?
A. Run Disk Cleanup for Programs and Features.
B. Run Disk Cleanup for System Restore and Shadow Copies.
C. From the System Protection Restore settings, select Turn off System Restore.
D. From the System Protection Restore settings, select Only restore previous versions of files.
Answer: B

NO.20 You have a computer that runs Windows 7 Professional. A USB disk is attached to the computer. You
need to ensure that you can enable BitLocker To Go on the USB disk. What should you do?
A. Enable Encrypting File System (EFS).
B. Upgrade the computer to Windows 7 Enterprise.
C. Initialize the Trusted Platform Module (TPM) hardware.
D. Obtain a client certificate from an enterprise certification authority (CA).
Answer: B