Pass4Test 에서 제공하는 학습가이드에는 IT전문가들이 만들어낸   EMC E20-547 (VNX Solutions Specialist Exam for Storage Administrators )  인증시험의 완벽한 문제와 답들을 대비한 자료가 포함되어있습니다. Pass4Test에서는 IT업계에서의 높은 신뢰감으로 여러분들한테 100%보장을 드립니다.  믿음을 드리기 위하여   EMC E20-547 (VNX Solutions Specialist Exam for Storage Administrators )  관련자료의 일부분 문제와 답 등 샘플을 무료로 다운받아 체험해 볼수 있게 제공합니다. EMC E20-547 (VNX Solutions Specialist Exam for Storage Administrators )   문제와 답을 체험하는 동시에Pass4Test 제품 선택여부에 대하여 답이 나올 것입니다.Pass4Test 는 백프로 여러분들한테 편리함과 통과율을 보장 드립니다. 여러분이 안전하게   EMC E20-547 (VNX Solutions Specialist Exam for Storage Administrators )  시험을 패스할 수 있는 곳은 바로 Pass4Test입니다.인증시험을 패스하려면 시험대비 자료 선택은 필수입니다. Pass4Test의 전문가들은 모두 경험도 많고, 그들이 연구해낸 자료는 실제시험의 문제를 많이 적중하고 있습니다.

 

 

NO.1 In a VNX series array, how does FAST manage data in a heterogeneous storage pool?
A. It relocates LUNs from one tier to another to improve performance.
B. It relocates more active data to faster drives and less active data to slower drives.
C. It relocates more active data from tier 1storage without users noticing the difference.
D. It acts as an application accelerator and relocates LUNs based on performance.
Answer: B

NO.2 What will prevent a storage administrator from deleting a storage group?
A. The presence of LUNs in the storage group
B. The presence of MirrorView target LUNs in the storage group
C. The presence of MirrorView source LUNs in the storage group
D. The presence of hosts in the storage group
Answer: D

NO.3 Which Unisphere storage role will limit a user to the administration of the file system checkpoints, LUN
mirrors, and replication manager tasks?
A. Data recovery
B. Administration
C. Data protection
D. NAS administrator
Answer: C

NO.4 What is the CLI command to enable Access Logix?
A. naviseccli -h <SP_name> storagegroup -enable
B. naviseccli -h <SP_name> accesslogix -enable
C. naviseccli -h <SP_name> storagegroup -on
D. naviseccli -h <SP_name> accesslogix -on
Answer: B

NO.5 What is the preferred method for partitioning VNX FC LUNs attached to a Windows Server 2008 R2
host?
A. Disk Management
B. fdisk
C. format
D. vtoc
Answer: A

NO.6 Which RecoverPoint configuration details can be presented in report format when using Data Protection
Advisor.?
A. RPA configuration changes
B. Replication sets
C. Replication lag
D. Link state change
Answer: C

NO.7 A file system has auto_extend enabled. If the file system size is greater than the extend_size value.
What will happen when the file system reaches its HWM?
A. The file system will not be extended
B. The extend size value cannot by less than the die system size
C. The file system is extended by the extend_size value
D. The file system is extended by five percent of its size
Answer: D

NO.8 How many storage groups can a host belong to in an array?
A. 1
B. 2
C. 4
D. 6
Answer: A

NO.9 Which Linux kernel supports dynamic LUN scanning?
A. 2.3
B. 2.4
C. 2.5
D. 2.6
Answer: D

NO.10 What happens when a reverse synchronization completes without Protected Restore Mode enabled?
A. Only the reverse-synchronized clone remains unfractured
B. Host writes to the source LUN are not mirrored to clone
C. The gold copy clone used for restore will remain as is
D. All clones will be fractured
Answer: B

NO.11 What does the acronym "CHAP" refer to?
A. Challenge Handshake Authentication Protocol
B. Challenge Handshake Authorization Protocol
C. CLARiiON Handshake Authentication
D. Consistent Host Application Protocol
Answer: A

NO.12 Which criterion must be met before executing the storage pool -destroy command with Navisphere
secure CLI.
A. Complete removal of all LUNs from the pool
B. Complete removal of unused LUNs from the pool
C. Complete removal of large LUNs from the pool
D. Complete removal of empty LUNs from the pool
Answer: A

NO.13 What happens when a new CFS share is created using Unisphere and all available CIFS server check
boxes remain unchecked?
A. The VNX system prompts for selection of at least one CFS server
B. A global share Is created and served by the primary VDM
C. A global share is created and served by all CIFS servers residing on the Data Mover
D. None of the CIFS servers residing on the Data Mover serve the newly created share
Answer: D

NO.14 Which Unisphere wizard can automatically allocate all available disk storage and present it as private
LUNs?
A. Backend Bus Reset Wizard
B. File System Wizard
C. Disk Provisioning Wizard for File
D. Celera Setup Wizard
Answer: C

NO.15 If a source LUN is trespassed, what happens to a fractured cloned LUN?
A. The peer SP acquires the feature logs
B. The peer SP acquires the clone LUN
C. The peer SP acquires both the clone LUN and the feature logs
D. Neither the clone LUN nor the feature logs will be acquired by the peer SP
Answer: C

NO.16 At which RAID level are FAST Cache drives configured for VNX arrays?
A. RAID 0
B. RAID 1
C. RAID 3
D. RAID 5
Answer: B

NO.17 An administrator tries to modify the quota settings on a CIFS share from a windows server 2003 host,
but the quota tab does not exist in the network drive properties. What could be a possible cause?
A. Exporting is implemented at the file system subdirectory level on VNX OE for File.
B. The user does not have administrator privileges on this share.
C. Quotas can be managed only with Windows Server 2008.
D. Windows users cannot modify the quota settings.
Answer: A

NO.18 After presenting a LUN to a Linux host, which utility is used to configure a partition?
A. fdisk
B. Unisphere Server Utility
C. Unisphere Service Manager
D. Disk Management
Answer: A

NO.19 Which failover mode must be configured to use vStorage APIs for Array Integration (VAAI)
functionality?
A. 0
B. 1
C. 2
D. 4
Answer: D

NO.20 When performing switch maintenance, a customer accidentally disconnects all network connections to
an active VNX Data Mover
How does VNX handle this situation?
A. The primary Data Mover remains active
B. The VNX always notifies EMC Customer Service of the problem
C. The active Data Mover immediately fails over
D. The active Data Mover fails over after 30 seconds of lost connectivity
Answer: A