JNCIA JN0-101 (JNCIA-JUNOS EXAM OBJECTIVES)시험을 패스함으로 취업에는 많은 도움이 됩니다. Pass4Tes는  JNCIA JN0-101 (JNCIA-JUNOS EXAM OBJECTIVES) 시험패스로 꿈을 이루어주는 사이트입니다. Pass4Tes의  JNCIA JN0-101 (JNCIA-JUNOS EXAM OBJECTIVES) 덤프는 아주 좋은 학습자료로 응시하는데 충분한 문제집입니다. 여러분이 안전하게 간단하게  JNCIA JN0-101 (JNCIA-JUNOS EXAM OBJECTIVES) 덤프로 시험을 응시하시면 됩니다.

 

Pass4Test의 자료는 시험대비 최고의 덤프로 시험패스는 문제 없습니다. Pass4Test의 퍼펙트한 덤프인  JNCIA JN0-101 (JNCIA-JUNOS EXAM OBJECTIVES) 인증시험 자료의 문제와 답만 열심히 공부하면 여러분은 완전 안전히  JNCIA JN0-101 (JNCIA-JUNOS EXAM OBJECTIVES) 인증 자격증을 취득하실 수 있습니다. JNCIA JN0-101 (JNCIA-JUNOS EXAM OBJECTIVES) 인증시험이 이토록 인기가 많으니 우리 Pass4Test에서는 모든 힘을 다하여 여러분이 응시에 도움을 드리겠으며 또 일년무료 업뎃서비스를 제공하며  Pass4Test 선택으로 여러분은 자신의 꿈과 더 가까워질 수 있습니다. 희망찬 내일을 위하여 Pass4Test선택은 정답입니다.

 

 

NO.1 Whitch three user authentication methos are supported by the Junos OS? (Choose three)
A.RADIUS
B.CHAP
C.local user database
D.tacacs+
E.PAP
Answer: ACD

NO.2 What is the default protocol preference for OSPF internal routes?
A.10
B.15
C.150
D.160
Answer: A

NO.3 Referring to the exhibit,
which two statements are true? (Choose two)
A.The route 192.168.1.0/25 is accepted
B.The route 192.168.2.0/25 is accepted
C.OSPF routes will be exported into RIP
D.RIP routes will be exported into OSPF
Answer: AD

NO.4 You have been asked to create a static route with a next hop that is not directly connected to the
router.Which configuration parameter enables the static route to accomplish this scenario?
A.resolve
B.indirect
C.next-hop
D.recursive
Answer: A

NO.5 What is the default import routing for OSPF?
A.Accept all OSPF routes and install them into the 3 routing table
B.Accept all OSPF routes and install them into the inet7.0 routing table
C.Accept all OSPF routes and install them into the inet4.0 routing table
D.Accept all OSPF routes and install them into the inet.0 routing table
Answer: D

NO.6 Referring to the exhibit, which type of classifier is being used in this CoS configuration?
[edit fireall family inet filter COS-CLASSIFIER]
user@router# show
term MANAGER {
form {
soruce-address {
192.168.200.0/25;
}
destination-address {
100.100.100.1/32;
}
}
then {
forwarding-class expedited-forwarding;
accept;
}
}
term ALL-OTHER-TRAFFIC {
then accept;
}
[edit interfaces ge-0/0/1]
user@router# show
unit 0 {
family inet {
filter {
input COS-CLASSIFIER
}
address 192.168.200.1/24;
}
}
A.behavior aggregate
B.policer
C.multifield
D.forward policy
Answer: C

NO.7 What represents the binary equivalence of 207?
A.11001111
B.11101011
C.11010111
D.11010101
Answer: A

NO.8 Which two statements are true about the rescue configuration file? (Choose two)
A.It must include a root password
B.It is roll back file number 50, and you can recover it by issuing rollback 50
C.It is created by issuing request system configuration rescue save
D.It is updated automatically when you commit
Answer: AC

NO.9 Which command do you use to go from the shell prompt to the CLI prompt.?
A.run cli
B.cli
C.start cli
D.edit
Answer: B

NO.10 Which two statements are true about the forwarding table? (Choose two)
A.The forwarding table lists each source protocol and preference for each destination
B.The forwarding table constains only active routes
C.The forwarding table is used to process transit packets
D.The forwarding table is stored in compact flash
Answer: BC

NO.11 What are two valid match criteria for a routing policy? (Choose two)
A.OSPF area ID
B.prefix list
C.port
D.time-to-live (TTL)
Answer: AB

NO.12 Given the routing entries shown in the exhibit, which next-hop IP address will be used for the
destination IP address 192.168.1.142? (Assume that only static routes are available for the destination)
A.10.20.106.10
B.10.20.14.131
C.10.18.1.1
D.10.20.14.130
Answer: D

NO.13 Given the configuration and routing table in the exhibit, which routes will be advertised to OSPF
neighbors because of the demo policy?
A.192.168.0.0/16 only
B.192.168.0.0/17 only
C.192.168.50.0/24 and 192.168.51.0/24
D.192.168.0.0/17, 192.168.50.0/24 and 192.168.51.0/24
Answer: D

NO.14 You need to control SSH, HTTP, and Telnet access to an MX240 router through any interface.You have
decided to use a firewall filter.How should you apply the firewall filter?
A.as an outbound filter on interface fxp0
B.as an outbound filter on interface lo0
C.as an inbound filter on interface fxp0
D.as an inbound filter on interface lo0
Answer: D

NO.15 When using the monitor traffic command on Junos devices, which UNIX-based utility is accessed?
A.snoop
B.tcpdump
C.monitor
D.tail
Answer: C

NO.16 You are the top of hierarchy and must configure OSPF on inteface so-0/0/0 unit 100.Which two
achieve this result? (Choose two)
A.set protocols set ospf area 0 set interface so-0/0/0.100
B.set protocols ospf area 0 interface so-0/0/0.100
C.edit protocols ospf interface so-0/0/0.100
D.edit protocols ospf area 0 set interface so-0/0/0.100
Answer: BD

NO.17 Which account is used to access a Junos device in a factory-default configuration?
A.root
B.admin
C.juniper
D.user
Answer: A

NO.18 You issue the ping interface t1-1/1/0 1.1.1.1 bypass-routing count 1000 rapid command
Which statement is correct?
A.The bypass-routing parameter is used to test the density on the T1 line
B.The bypass-routing parameter cannot be used on a T1 interface
C.The bypass-routing parameter allows you to ping a host through an interface that has no route through
it
D.The bypass-routing parameter allows you to ping a local WAN interface without generating any
outbound traffic
Answer: C

NO.19 Which three protocols use UDP as a transport protocol by default? (Choose three)
A.HTTP
B.TFTP
C.DNS
D.SNMP
E.SMTP
Answer: BCD

NO.20 What must be configured prior to the first commit after factory defaults are loaded?
A.root authentication
B.default gateway
C.hostname
D.management services
Answer: A
 

 

이 자료로 여러분은 100%   JNCIA JN0-101 (JNCIA-JUNOS EXAM OBJECTIVES) 인증시험을 패스할 수 있으며 Pass4Test을 선택함으로 성공을 선택한 것과 같습니다. Pass4Test가 제공하는 시험가이드로 효과적인 학습으로 많은 분들이 모두 인증시험을 패스하였습니다. 이건 모두 Pass4Test 인증시험덤프로 시험준비를 하셨기 때문입니다. 그 중  JNCIA JN0-101 (JNCIA-JUNOS EXAM OBJECTIVES) 인증시험을 패스한 분들도  Pass4Test인증시험 덤프를 사용하셨기 때문입니다.