Pass4Test는 많은 분들이 IT인증시험을 응시하여 성공하도록 도와주는 사이트입니다.  Pass4 Test 는 많은 IT전문가들로 구성되었습니다. Pass4Test 의 덤프는 모두 엘리트한 전문가들이 만들어낸 만큼 시험문제의 적중률은 아주 높습니다. 거의 100%의 정확도를 자랑하고 있습니다. 아마 많은 유사한 사이트들도 많습니다. 이러한 사이트에서 학습가이드와 온라인서비스도 지원되고 있습니다만  Pass4Test 는 이미 이러한 사이트를 뛰어넘은 실력으로 업계에서는 우리만의 이미지를 지키고 있습니다. Pass4Test 는 정확한 문제와 답만 제공하고 또한 그 어느 사이트보다도 빠른 업데이트로 여러분의 인증시험을 안전하게 패스하도록합니다.

 

Pass4Test 는 인증시험에 참가하는 분들한테 편리를 제공하는 사이트이며,여러분들의 시험패스에 도움을 줄 수 있는 사이트입니다.많은 분들은  HP AIS HP2-Z18 (Network Infrastructure AIS 2011)  인증시험이 아주 어려운 것은 알고 있습니다. 하지만 Pass4Test를 선택함으로  HP AIS HP2-Z18 (Network Infrastructure AIS 2011)   인증시험은 그렇게 어렵지 않다는 것을 알게 될 것입니다. Pass4Tes의   HP AIS HP2-Z18 (Network Infrastructure AIS 2011)  학습가이드는 시험의 예상문제부터 전면적이로 만들어진 아주 퍼펙트한 시험자료입니다.

 

 

NO.1 Which security technology requires that you set read/write community names?
A. SFTP
B. SSH
C. SNMP
D. HTTPS
E. SMTP
Answer: C

NO.2 You must update the software on an HP E3500 yl switch. Which devices can be sources for the copy
command? (Select two.)
A. USB flash drive
B. management workstation hard drive
C. TFTP server
D. FTP server
E. Compact Flash card
Answer: A, C

NO.3 You are at the manager level prompt in the CLI of an HP E3500 yl switch. Which options are available at
this prompt? (Select two.)
A. assign IP address to VLAN interface
B. enable IP routing
C. restart the switch
D. disable ports
E. update software
Answer: C, E

NO.4 Port B1 on an HP ProCurve 5406zl switch is an untagged member of VLAN 155 and not a tagged
member of any VLAN. Port C1 is a tagged member of VLAN 155 and an untagged member of VLAN 100.
You issue the following command:
5406.l(config)# no vlan 155
Why do you receive the following prompt?
The following ports will be moved to the default VLAN:
B1
Do you want to continue? [y/n]:
A. The CLI always issues this prompt when deleting a VLAN.
B. The CLI will not allow you to orphan a port.
C. The CLI will not delete a VLAN with any port membership.
D. All ports must be moved to the default VLAN before you can delete the VLAN.
Answer: B

NO.5 You have configured a dynamic LACP four-port trunk connecting two HP E-Series switches. How will
the switches share the load over the trunk?
A. The switch that receives the first packet in each conversation will balance the load by ensuring reply
packets use a different link.
B. Each switch will assign conversations to links independent of the other switch's selection.
C. The switches will exchange LACP BPDUs to negotiate a load-sharing algorithm.
D. The switches will dynamically calculate the path of least congestion for each conversation.
Answer: D

NO.6 Ports 1-4 on an HP E3500 yl switch are tagged members of VLAN 44 and untagged members of VLAN
45. What is the effect of the following command?
E3500(config)# trunk 1-4 trk3 lacp
A. trk3 becomes a tagged member of VLAN 44 and an untagged member of VLAN 45.
B. trk3 will have no VLAN memberships until they are configured by an administrator.
C. trk3 becomes an untagged member of VLAN 1 and has no other VLAN memberships.
D. trk3 becomes an untagged member of VLAN 1 and a tagged member of VLAN 44.
Answer: C

NO.7 Which command entered at the CLI of an HP E3500 yl switch displays dynamic information about traffic
transmitted and received on each port?
A. E3500 yl# show interface traffic
B. E3500 yl# show interface all
C. E3500 yl# show interface display
D. E3500 yl# show interface dynamic
Answer: C

NO.8 Which remote management interface on an E-Series switch can be secured by enabling Secure
Sockets Layer (SSL)?
A. console
B. menu
C. web management
D. Telnet
Answer: C

NO.9 You must enable Secure HTTP (HTTPS) to encrypt web-based management traffic on an HP E-Series
switch. The switch is at default settings. What must be installed or enabled to apply this solution?
A. web server
B. encryption accelerator
C. digital certificate
D. internal RADIUS server
Answer: A

NO.10 You must determine whether routing has been enabled on an HP E 5406 zl switch. Which commands
provide this information? (Select two.)
A. show interfaces
B. show running-config
C. show vlans
D. show ip route
E. show ip
Answer: B, E

NO.11 Refer to the exhibit below.
You enter the following command at the switch ¯ s C L I
E5406(vlan-100)# no untag a24
Why does this command fail?
A. Port A24 is not a member of VLAN 100.
B. Port A24 must be a member of at least one VLAN.
C. VLAN 100 must have at least one port member.
D. no untag a24 is an invalid CLI command.
Answer: B

NO.12 You must determine whether routing has been enabled on an HP E 5406 zl switch. Which commands
provide this information? (Select two.)
A. show interfaces
B. show running-config
C. show vlans
D. show ip route
E. show ip
Answer: B, D

NO.13 A customer requires that each management user of HP switches has a unique user name and
password. How can you fulfill this requirement on HP E-Series switches?
A. Add each switch to the customer's Active Directory domain.
B. Use an external RADIUS server for authentication.
C. Enable 802.1X port authentication on each managed switch.
D. Install a Premium License on each managed switch.
Answer: B

NO.14 When Spanning Tree Protocol is enabled, which devices receive outbound LLDP advertisements from
an HP E-Series switch?
A. those with interfaces in VLAN 1
B. those that receive the switch's broadcasts
C. those that are directly connected to the switch
D. those in the LLDP multicast group
E. those not blocked by Spanning Tree Protocol
Answer: C

NO.15 You make configuration changes to the running configuration of your HP E3500 yl switch. Which
command saves these changes to your startup configuration?
A. save running-config
B. copy running-config startup-config
C. write memory
D. write config
Answer: C
 

 

Pass4Tes는 여러분이    HP AIS HP2-Z18 (Network Infrastructure AIS 2011)   인증시험 패스와 추후사업에 모두 도움이 되겠습니다.  Pass4Tes제품을 선택함으로 여러분은 시간도 절약하고 돈도 절약하는 일석이조의 득을 얻을수 있습니다. 또한 구매후 일년무료 업데이트 버전을 받을수 있는 기회를 얻을수 있습니다.  HP AIS HP2-Z18 (Network Infrastructure AIS 2011)  인증시험패스는 아주 어렵습니다. 자기에 맞는 현명한 학습자료 선택은 성공의 지름길을 내딛는 첫발입니다.