저희는 수많은 IT자격증시험에 도전해보려 하는 IT인사들께 편리를 가져다 드리기 위해 Oracle 1Z0-055 (Oracle Database 11g: New Features for 9i OCPs) 실제시험 출제유형에 근거하여 가장 퍼펙트한 시험공부가이드를 출시하였습니다. 많은 사이트에서 판매하고 있는 시험자료보다 출중한 Pass4Test의 Oracle 1Z0-055 (Oracle Database 11g: New Features for 9i OCPs) 덤프는 실제시험의 거의 모든 문제를 적중하여 고득점으로 시험에서 한방에 패스하도록 해드립니다. Oracle 1Z0-055 (Oracle Database 11g: New Features for 9i OCPs) 시험은 Pass4Test제품으로 간편하게 도전해보시면 후회없을 것입니다.

NO.1 View the Exhibit to examine the error during the database startup.
You open an RMAN session for the database instance. To repair the failure, you executed the following as
the first command in the RMAN session:
RMAN> REPAIR FAILURE;
Which statement describes the consequence of the command?
A. The command performs the recovery and closes the failures.
B. The command only displays the advice and the RMAN script required for repair.
C. The command produces an error because the ADVISE FAILURE command has not been executed
before the REPAIR FAILURE command.
D. The command executes the RMAN script to repair the failure and removes the entry from the
Automatic Diagnostic Repository (ADR).
Answer: C

NO.2 View the Exhibit to examine the details for an incident.
Which statement is true regarding the status of the incident?
A. The DBA is working on the incident and prefers that the incident be kept in the ADR.
B. The incident is now in the Done state and the ADR can select the incident to be purged.
C. The incident has been newly created and is in the process of collecting diagnostic information.
D. The data collection for the incident is complete and the incident can be packaged and sent to Oracle
Support.
Answer: D

NO.3 While performing the backup of the flash recovery area, you notice that one of the archived redo log
files is missing. You have multiple destinations for archived redo log files. What implications does it have
on the backup of the flash recovery area?
A. The backup succeeds but it would be without the missing archived log.
B. The backup fails because one of the archived redo log files is missing.
C. The backup succeeds because it fails over to one of the alternative archived redo log destinations.
D. During backup, you are prompted for the alternative destination for the missing archived redo log file.
Answer: C

NO.4 When executing a SQL workload, you choose to generate execution plans only, without collecting
execution statistics. Which two statements describe the implications of this? (Choose two.)
A. It produces less accurate results of the comparison analysis.
B. It automatically calls the SQL Tuning Advisor for recommendations.
C. It shortens the time of execution and reduces the impact on system resources.
D. Only the changes in the execution plan, and not performance regression, are detected.
Answer: AC

NO.5 Which two statements are true with respect to the maintenance window? (Choose two.)
A. A DBA can enable or disable an individual task in all maintenance windows.
B. A DBA cannot change the duration of the maintenance window after it is created.
C. In case of a long maintenance window, all Automated Maintenance Tasks are restarted every four
hours.
D. A DBA can control the percentage of the resource allocated to the Automated Maintenance Tasks in
each window.
Answer: AD

NO.6 You performed an incomplete recovery and opened the database with the RESETLOGS option. The
LOG_ARCHIVE_FORMAT parameter is set to 'ora_%t_%s_%r.log'. Which statement regarding the
archived redo log files, created in an earlier incarnation of the database, is true?
A. The archived redo log files will be overwritten.
B. The archived redo log files are deleted automatically.
C. The archived redo log files should be moved to some other location.
D. The archived redo log files are still maintained because the file names are unique.
Answer: D

NO.7 Which are the prerequisites for performing flashback transactions on your database? (Choose all that
apply.)
A. Supplemental log must be enabled.
B. Supplemental log must be enabled for the primary key.
C. Undo retention guarantee for the database must be configured.
D. Execute permission on the DBMS_FLASHBACK package must be granted to the user.
Answer: ABD

NO.8 You want to convert your existing non-ASM files to ASM files for the database PROD. Which method or
command would you use to accomplish this task?
A. Data Pump Export and Import
B. conventional export and import
C. the CONVERT command of RMAN
D. the BACKUP AS COPY.. command of RMAN
Answer: D

NO.9 Which setting enables the baselines by default in Oracle Database 11g?
A. setting the STATISTICS_LEVEL parameter to TYPICAL
B. adding filters to the Automatic Database Diagnostic Monitor (ADDM)
C. enabling Automated Maintenance Task using Oracle Enterprise Manager
D. setting the OPTIMIZER_USE_PENDING_STATISTICS parameter to TRUE
Answer: A

NO.10 An online tablespace, TEST_TBS, is full and you realize that no server-managed tablespace
threshold alerts were generated for the TEST_TBS tablespace. What could be the reason, if the
TEST_TBS tablespace does not include autoextensible data files?
A. TEST_TBS is a small file tablespace.
B. TEST_TBS is a bigfile tablespace (BFT).
C. TEST_TBS is the default temporary tablespace.
D. TEST_TBS is a dictionary-managed tablespace.
Answer: D

NO.11 In your database, the RESULT_CACHE_MODE parameter has been set to MANUAL in the
initialization parameter file.
You issued the following command:
SQL>SELECT /*+ RESULT_CACHE */ sale_category, sum(sale_amt)
FROM sales
GROUP BY sale_category;
Where would the result of this query be stored?
A. PGA
B. large pool
C. shared pool
D. database buffer cache
Answer: C

NO.12 Which method would you use to undo the changes made by a particular transaction without affecting
the changes made by other transactions?
A. point-in-time recovery
B. execute the ROLLBACK command with transaction number
C. flashback the database to before the transaction was committed
D. determine all the necessary undo SQL statements from FLASHBACK_TRANSACTION_QUERY and
use them for recovery
Answer: D

NO.13 Which of the following information will be gathered by the SQL Test Case Builder for the problems
pertaining to SQL-related problems? (Choose all that apply.)
A. ADR diagnostic files
B. all the optimizer statistics
C. initialization parameter settings
D. PL/SQL functions, procedures, and packages
E. the table and index definitions and actual data
Answer: BCE

NO.14 Examine the following PL/SQL block:
SET SERVEROUTPUT ON
SET LONG 10000
DECLARE report clob;
BEGIN
report := DBMS_SPM.EVOLVE_SQL_PLAN_BASELINE();
DBMS_OUTPUT.PUT_LINE(report);
END;
Which statement describes the effect of the execution of the above PL/SQL block?
A. The plan baselines are verified with the SQL profiles.
B. All fixed plan baselines are converted into nonfixed plan baselines.
C. All the nonaccepted SQL profiles are accepted into the plan baseline.
D. The nonaccepted plans in the SQL Management Base are verified with the existing plan baselines.
Answer: D

NO.15 View the Exhibit exhibit1.
In the CUSTOMERS_OBE table, when the value of CUST_STATE_PROVINCE is "CA", the value of
COUNTRY_ID is "US"
View the Exhibit exhibit2 to examine the commands and query plans.
The optimizer can sense 8 rows instead of 29 rows, which is the actual number of rows in the table. What
can you do to make the optimizer detect the actual selectivity?
A. Set the STATISTICS_LEVEL parameter to TYPICAL.
B. Change the STALE_PERCENT value for the CUSTOMERS_OBE table.
C. Set the OPTIMIZER_USE_PENDING_STATISTICS parameter to FALSE.
D. Create extended statistics for the CUST_STATE_PROVINCE and COUNTRY_ID columns.
Answer: D

NO.16 Identify the activities performed as part of the Automatic SQL Tuning process in the maintenance
window? (Choose all that apply.)
A. generating the SQL profile
B. testing and accepting the SQL profile
C. generating a list of candidate SQLs for tuning
D. adding tuned SQL plans into the SQL plan baseline
E. tuning each SQL statement in the order of importance
F. generating baselines that include candidate SQL statement for tuning
Answer: ABCE

NO.17 Your system has been upgraded from Oracle Database 10g to Oracle Database 11g. You imported
SQL Tuning Sets (STS) from the previous version. After changing the OPTIMIZER_FEATURE_ENABLE
parameter to 10.2.0.4 and running the SQL Performance Analyzer, you observed performance regression
for a few SQL statements. What would you do with these SQL statements?
A. Set OPTIMIZER_USE_PLAN_BASELINES to FALSE to prevent the use of regressed plans.
B. Capture the plans from the previous version using STS and then load them into the stored outline.
C. Capture the plans from the previous version using STS and then load them into SQL Management
Base (SMB).
D. Set OPTIMIZER_CAPTURE_SQL_PLAN_BASELINES to FALSE to prevent the plans from being
loaded to the SQL plan baseline.
Answer: C

NO.18 View the Exhibit for the object interdependency diagram.
The PRODUCTS table is used to create the PRODCAT_VW view.
PRODCAT_VW is used in the GET_DATA procedure.
GET_DATA is called in the CHECK_DATA function.
A new column PROD_QTY is added to the PRODUCTS table.
How does this impact the status of the dependent objects?
A. All dependent objects remain valid.
B. Only the procedure and function become invalid and must be recompiled.
C. Only the view becomes invalid and gets automatically revalidated the next time it is used.
D. Only the procedure and function become invalid and get automatically revalidated the next time they
are called.
Answer: A

NO.19 You issued the following command:
CREATE GLOBAL TEMPORARY TABLE admin_work_area
(startdate DATE,
enddate DATE,
class CHAR(20))
ON COMMIT DELETE ROWS
TABLESPACE tbs_t1;
An index is then created on the ADMIN_WORK_AREA temporary table.
Which two statements are true regarding the TBS_T1 tablespace in the above command? (Choose two.)
A. It stores only the temporary table but not its indexes.
B. It stores both the temporary table as well as its indexes.
C. It must be a nondefault temporary tablespace for the database.
D. It can be a default or nondefault temporary tablespace for the database.
E. It must be the default temporary tablespace of the user who issues the command.
Answer: BD

NO.20 While deploying a new application module, the software vendor ships the application software along
with appropriate SQL plan baselines for the new SQLs being introduced. Which two statements describe
the consequences? (Choose two.)
A. The plan baselines can be evolved over time to produce better performance.
B. The newly generated plans are directly placed into the SQL plan baseline without being verified.
C. The new SQL statements initially run with the plans that are known to produce good performance
under standard test configuration.
D. The optimizer does not generate new plans for the SQL statements for which the SQL plan baseline
has been imported.
Answer: AC