Microsoft인증70-410시험은 IT인증시험과목중 가장 인기있는 시험입니다. Pass4Test에서는Microsoft인증70-410시험에 대비한 공부가이드를 발췌하여 IT인사들의 시험공부 고민을 덜어드립니다. Pass4Test에서 발췌한 Microsoft인증70-410덤프는 실제시험의 모든 범위를 커버하고 있고 모든 시험유형이 포함되어 있어 시험준비 공부의 완벽한 선택입니다.

Microsoft 70-410인증시험을 어떻게 준비하면 될가 아직도 고민하고 계시죠? 학원에 등록하자니 시간도 없고 돈도 많이 들고 쉽게 엄두가 나지 않는거죠? Pass4Test제품을 구매하신다면 그런 부담을 이제 끝입니다. Pass4Test덤프는 더욱 가까지 여러분들께 다가가기 위하여 그 어느 덤프판매 사이트보다 더욱 저렴한 가격으로 여러분들을 맞이하고 있습니다. Microsoft 70-410덤프는Pass4Test제품이 최고랍니다.

Microsoft 70-410인증시험은 전문적인 관련지식을 테스트하는 인증시험입니다. Pass4Test는 여러분이Microsoft 70-410인증시험을 통과할 수 잇도록 도와주는 사이트입니다. 많은 분들이 많은 시간과 돈을 들여 혹은 여러 학원 등을 다니면서Microsoft 70-410인증시험패스에 노력을 다합니다. 하지만 우리Pass4Test에서는 20시간 좌우만 투자하면 무조건Microsoft 70-410시험을 패스할 수 있도록 도와드립니다.

시험 번호/코드: 70-410
시험 이름: Installing and Configuring Windows Server 2012
당신이 구입하기 전에 시도, 100% 합격율 보장
100% 환불보장약속 70-410자격증덤프
PDF 및 소프트웨어, 연구와 실천

>>70-410 dump

NO.1 Your network contains one Active Directory domain named contoso.com. The domain contains
10 domain controllers and a read-only domain controller (RODC) named RODC01.
You need to ensure that when administrators create users in contoso.com, the default user principal
name (UPN) suffix is litwareinc.com.
Which cmdlet should you use?
A. the ntdsutil command
B. the Set-ADDomain cmdlet
C. the Install-ADDSDomain cmdlet
D. the dsadd command
E. the dsamain command
F. the dsmgmt command
G. the net user command
H. the Set-ADForest cmdlet
Answer: G

Microsoft기출문제 70-410 IT국제자격증 70-410응시료
Explanation:
The following example demonstrates how to create a new UPN suffix for the
users in the Fabrikam.com forest:
Set-ADForest -UPNSuffixes @{Add="headquarters.fabrikam.com"}
Reference: Creating a UPN Suffix for a Forest
https://technet.microsoft.com/sv-se/library/Dd391925(v=WS.10).aspx

NO.2 Your network contains a server named Server1 that runs Windows Server 2012
R2.Server1 has the Hyper-V server role installed.
Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4.
Server1 is configured as shown in the following table.
You install Windows Server 2012 R2 on VM2 by using Windows Deployment Services (WDS).
You need to ensure that the next time VM2 restarts, you can connect to the WDS server by using PXE
.
Which virtual machine setting should you configure for VM2?
A. NUMA topology
B. Resource control
C. resource metering
D. virtual Machine Chimney
E. The VLAN ID
F. Processor Compatibility
G. The startup order
H. Automatic Start Action
I. Integration Services
J. Port mirroring
K. Single-root I/O virtualization
Answer: G

Microsoft IT덤프 70-410국제공인자격증 70-410최신덤프 70-410
Explanation:
Configure the BIOS of the computer to enable PXE boot, and set the boot order so that it is booting
from the network is first.
References: http://technet.microsoft.com/en-us/library/cc766320(v=ws.10).aspx Exam Ref 70-410,
Installing and Configuring Windows Server 2012 R2, Chapter 3: Configure Hyper-V, Objective 3.1:
Create and Configure virtual machine settings, p.144 Training Guide: Installing and Configuring
Windows Server 2012 R2: Chapter 7: Hyper-V Virtualization, Lesson 2: Deploying and configuring
virtual machines, p.335

NO.3 Your network contains an Active Directory domain named contoso.com. The domain contains
two member servers named Server1 and Server2 that run Windows Server 2012 R2.
You log on to Server1.
You need to retrieve a list of the active TCP connections on Server2.
Which command should you run from Server1?
A. winrm get server2
B. netstat> server2
C. dsquery * -scope base -attrip, server2
D. winrs -r:server2 netstat
Answer: D

Microsoft기출문제 70-410시험 70-410자격증자료
Explanation:
This command line tool enables administrators to remotely execute most Cmd.exe commands using
the WSManagement protocol.

NO.4 You work as an administrator at Contoso.com. The Contoso.com network consists of a single
domain named Contoso.com. All servers in the Contoso.com domain, including domain controllers,
have Windows Server 2012 R2 installed.
When you recently added new workstations to the Contoso.com manually, you found that that the
computer accounts were created in the default container.
You want to make sure that the default container for newly created computers is redirected to a
specified, target organizational unit (OU).
Which of the following actions should you take?
A. You should consider making use of the replace.exe command-line tool.
B. You should consider making use of the redircmp.exe command-line tool.
C. You should consider making use of the redirusr.exe command-line tool.
D. You should consider making use of the rexec.exe command-line tool.
Answer: B

Microsoft 70-410 70-410 pdf 70-410자격증 70-410덤프
Explanation:
redircmp.exe redirects the default container for newly created computers to a specified, target
organizational unit (OU) so that newly created computer objects are created in the specific target OU
instead of in CN=Computers.

NO.5 Your network contains an Active Directory domain named contoso.com. The domain contains
servers named Server1 and Server2 that run Windows Server 2012 R2. Server1 has the Active
Directory Federation Services server role installed.Server2 is a file server.
Your company introduces a Bring Your Own Device (BYOD) policy.
You need to ensure that users can use a personal device to access domain resources by using Single
Sign-On (SSO) while they are connected to the internal network.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose
two.)
A. Enable the Device Registration Service in Active Directory.
B. Publish the Device Registration Service by using a Web Application Proxy.
C. Configure Active Directory Federation Services (AD FS) for the Device Registration Service.
D. Install the Work Folders role service on Server2.
E. Create and configure a sync share on Server2.
Answer: A,C

Microsoft시험정보 70-410자격증덤프 70-410기출문제 70-410인증덤프 70-410 pdf
Explanation:
*Prepare your Active Directory forest to support devices. This is a one-time operation that you must
run to prepare your Active Directory forest to support devices. To prepare the Active Directory forest
On your federation server, open a Windows PowerShell command window and type: Initialize-
ADDeviceRegistration *Enable Device Registration Service on a federation server farm node. To
enable Device Registration Service:
1.On your federation server, open a Windows PowerShell command window and type: Enable-
AdfsDeviceRegistration.
2.Repeat this step on each federation farm node in your AD FS farm.

NO.6 Your network contains one Active Directory domain named contoso.com. The domain contains
10 domain controllers and a read-only domain controller (RODC) named RODC01.
You plan to deploy a child domain for contoso.com in Microsoft Azure.
To the Azure subscription, you add several virtual machines that have a Server Core installation of
Windows Server 2012 R2.
You need to create the new domain on one of the virtual machines.
Which tool should you use?
A. the ntdsutil command
B. the Set-ADDomain cmdlet
C. the Install-ADDSDomain cmdlet
D. the dsadd command
E. the dsamain command
F. the dsmgmt command
G. the net user command
H. the Set-ADForest cmdlet
Answer: C

Microsoft덤프자료 70-410자격증자료 70-410인증덤프
Explanation:
The Install-ADDSDomain cmdlet installs a new Active Directory domain configuration.
https://technet.microsoft.com/en-us/library/hh974722(v=wps.630).aspx

NO.7 Your network contains an Active Directory domain named contoso.com. The domain contains
a member server named Server1. Server1 runs Windows Server 2012 R2 and has the Hyper-V server
role installed.
You create an external virtual switch named Switch1. Switch1 has the following configurations:
- Connection type: External network
- Single-root I/O virtualization (SR-IOV): Enabled
- Ten virtual machines connect to Switch1.
You need to ensure that all of the virtual machines that connect to Switch1 are isolated from the
external network and can connect to each other only. The solution must minimize network downtime
for the virtual machines.
What should you do?
A. Remove Switch1 and recreate Switch1 as an internal network.
B. Change the Connection type of Switch1 to Private network.
C. Change the Connection type of Switch1 to Internal network.
D. Remove Switch1 and recreate Switch1 as a private network.
Answer: D

Microsoft자료 70-410덤프 70-410기출문제 70-410 70-410
Explanation:
You cannot change the type of vswitch from external to private when SR-IOV is enabled at vswitch
creation ->you need to recreate the vswitch.

NO.8 You have a server named Server1. Server1 runs Windows Server 2012 R2 and has the File and
Storage Services server role installed.
You attach four 500-GB disks to Server1.
You need to configure the storage to meet the following requirements:
- Storage for an application named Application1 must be provided. Application1 requires 20 GB and
will require a maximum of 800 GB in three years.
- Storage for an application named Application2 must be provided. Application2 requires 20 GB and
will require a maximum of 900 GB in three years.
- The solution must provide the ability to dynamically add storage without requiring configuration
changes to the applications.
- The storage must be available if a single disk fails.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose
two.)
A. From File and Storage Services, create virtual disks by using fixed provisioning.
B. From File and Storage Services, create virtual disks by using thin provisioning.
C. From File and Storage Services, create a storage pool that uses all four disks.
D. From Disk Management, create a new RAID-5 volume that uses all four disks.
E. From Disk Management, create two new mirror volumes that use two disks each.
Answer: A,C

Microsoft인증덤프 70-410시험일정 70-410 70-410 70-410덤프다운 70-410
http://technet.microsoft.com/en-us/library/jj822937.aspx

Pass4Test 에서는 최신버전의 VCAP5-DCD시험에 대비한 고품질 덤프와 70-689시험 최신버전덤프를 제공해드립니다. Pass4Test의 C_TADM53_70덤프의 VCE테스트프로그램과 M2010-719덤프는 한방에 시험을 패스하도록 도와드립니다. 최고품질 1z0-883시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.pass4test.net/70-410.html