Pass4Test는 Microsoft MB6-703인증시험의 촉매제 같은 사이트입니다.Microsoft MB6-703인증시험 관연 덤프가 우리Pass4Test에서 출시되었습니다. 여러분이Microsoft MB6-703인증시험으로 나 자신과 자기만의 뛰어난 지식 면을 증명하고 싶으시다면 우리 Pass4Test의Microsoft MB6-703덤프자료가 많은 도움이 될 것입니다.
Pass4Test의Microsoft MB6-703시험자료의 문제와 답이 실제시험의 문제와 답과 아주 비슷합니다. 우리의 짧은 학습가이드로 빠른 시일 내에 관련지식을 터득하여 응시준비를 하게 합니다. 우리는 우리의Microsoft MB6-703인증시험덤프로 시험패스를 보장합니다.
시험 번호/코드: MB6-703시험 이름: Microsoft Dynamics AX 2012 R3 Trade and Logistics
당신이 구입하기 전에 시도, 100% 합격율 보장
100% 환불보장약속 MB6-703자격증
PDF 및 소프트웨어, 연구와 실천
NO.1 You have an item that uses a storage dimension group. Primary stocking
is disabled for the
group. Item reservations for sales orders are
automatic.
You create a new sales order for the item.
You need to select a
specific batch number for the item.
What should you do?
A. Disable
automatic reservation on the sales order, and then change the batch number in
the
Reservation form
B. Disable automatic reservation on the sales order,
and then lock the batch number in the
Reservation form.
C. Use the
Reservation form to select the batch number, and then place the order on
hold.
D. Use the Reservation form to select the batch number, and then lock
the reservation.
Answer: D
Microsoft
IT자격증시험자료 MB6-703시험후기 MB6-703덤프 MB6-703 MB6-703
IT덤프
Explanation:
Example A customer calls with a request concerning a
load of bricks that they have ordered from
your company. The customer wants
to make sure that the bricks are reserved from the same batch as
the previous
load that they received. When checking, you observe that the bricks are
reserved
automatically with no batch number specified on the sales order line
so you need to make sure that
the reserved quantity has the correct batch
number and that
the reservation is locked with this batch number.
- Select
the sales order of the ordered brick load in the Sales order form and open the
Reservation
form.
- Apply one of the following methods depending on
whether the bricks have been automatically
reserved with the correct batch
number or not. If the batch number is correct, you just need to lock
the
batch number reservation to ensure that the batch number is not changed by an
automated
process. To lock the batch number, do the following:
- To change
the batch number dimension of the reservation, do the following:
NO.2 A
user wants to use a custom filter onthe Arrival overview form.
You need to
explain how to save the filter options to the user's computer.
What should
you tell the user?
A. Use the Personalization form to change the layout, and
then load the Personalization settings in
the Arrival overview form.
B.
Specify a setup name on the Setup tab of the Arrival overview form and save the
current settings.
C. Specify a setup name on the Setup tab of the Inventory
and warehouse management parameters
form and save the current settings.
D.
Create a shipment template, and then apply the template in the Arrival overview
form.
Answer: B
Microsoft MB6-703
IT덤프 MB6-703시험일정 MB6-703
Explanation:
Arrival
overview (form) [AX 2012]
* The overvieb tabConsists of five main
sections:
/ Filter options for the information that is displayed in the
form.
Etc
/ The Setup tab:Setup option for the information that is to be
displayed on the Overview tab.
NO.3 A sale was made, and on one of the
lines of the sales order, another sales group must be given
credit for the
sale and any commission that is generated for that line.
You need to generate
the commission on the relevant sales line to the other sales group.
What
should you use?
A. The sales journal
B. Theline details section of
the sales order
C. The Commission calculation form
D. The Commission
posting form
Answer: C
Microsoft기출문제 MB6-703 MB6-703교육
Explanation:
Commission
calculation
Click Navigation Pane node: Accounts receivable -> Setup ->
Commission -> Commission
calculation.
Go to the Setup tab, specify the
following options:
Etc.
NO.4 You need to create a purchase agreement
between your company and a supplier. The
agreement will give you a 10 percent
discount automatically on an item, after you purchase $10,000
US dollars'
worth of that Item during a 12 month period.
Which Default commitment type
should you use?
A. Product quantity commitment
B. Value commitment
C.
Product value commitment
D. Product category value commitment
Answer:
C
Microsoft시험문제 MB6-703최신버전덤프 MB6-703 MB6-703덤프
Explanation:
There
are four types of commitments:
Product quantity commitment - You purchase a
specific quantity of a product.
Product value commitment - You purchase a
specific currency amount of a product.
Product category value commitment -
You purchase a specific currency amount in a
procurement category. The amount
can be for a catalog item or a non-catalog item.
Value commitment - You
purchase a specific currency amount of any product or in any
procurement
category.
NO.5 You are configuring a new bill of materials (BOM) for a
new product. The product is a set of
speakers.
You add all of the
component items for the product to the BOM lines.
You need to set up the
configuration route for the new product to meet the following
requirements:
The power of the speakers must depend on the speaker
enclosure.
The speaker enclosure must depend on the wiring harness.
What
should you do?
A. Create a default configuration route, and then select the
speaker enclosure item for the speaker.
B. Include the speaker enclosure and
the wiring harness in a configuration rule.
C. Create a new BOM for the
speaker enclosure, and then create a new BOM for the wiring harness.
D.
Select an item from the wiring harness configuration group, and then from the
speaker enclosure.
Answer: B
Microsoft응시료 MB6-703
IT자격증 MB6-703자격증덤프 MB6-703
IT자격증시험 MB6-703 Dump MB6-703
IT자격증시험자료
Explanation:
Example:
We are going to create a bill
of material for the 'FG_ITEM'. We want either 'ITEM_1' &
'ITEM_3' OR
'ITEM_2' & 'ITEM_4' to be selected as components for 'FG_ITEM'. For
this
purpose we will define configuration route and configuration rules for
component selection.
- Open 'Bill of materials' form from Inventory and
warehouse management > Common > Bill of
materials
- Create new BOM
for 'BOM for FG_ITEM' - Add 'ITEM_1', 'ITEM_2' assigning 'Group_1' a
s
Configuration group, and
'ITEM_3' and 'ITEM_4' assigning 'Group_2' as
Configuration group in BOM lines. - Click 'Configuration
route' tab and add
'Group_1' and 'Group_2'. - Select 'Group_1' and click 'Configuration
rules'
Etc.
NO.6 You create a counting journal. The counted quantity
on some lines of the journal is higher or
lower than the on-hand
quantity.
You need to identify which field will be updated in the inventory
transaction when you post the
counting journal.
Which field should you
identify?
A. Quantity
B. Counted
C. On-hand
D. Line
amount
Answer: C
Microsoft IT덤프 MB6-703교육 MB6-703
Explanation:
Field
On-Hand:The on-hand inventory levels of the item for the inventory dimension on
the counting
date.
NO.7 You have a bill of materials (BOM)
item.
Ten percent of one of the BOM components is wasted during the
manufacturing process.
You need to ensure that the cost calculation for the
BOM item is accurate.
What should you do?
A. Set the Variable scrap field
on the component BOM line to 10.
B. Set the Constant scrap field on the
component BOM line to 10.
C. Set the Consumption is field on the component
BOM line to variable.
D. Set the Consumption is field on the component BOM
line to constant.
Answer:
B
Microsoft교육 MB6-703
IT자격증시험 MB6-703강좌 MB6-703 MB6-703시험자료
Explanation:
Specify
constant scrap when you know, or have calculated, that a quantity of bill of
materials (BOM)
items will be lost or rejected during production. For
example, you can apply constant scrap to the
setup of a machine if you know
that material will be always be wasted before a usable product
is
produced.
NO.8 Your company adds a 20 percent markup to all
items.
You need to ensure that users receive a warning message if an attempt
to discount the price of an
item results in less than a 15 percent markup of
the item.
What should you configure?
A. Price details
B. Margin
alerts
C. Price control
D. Internal control
Answer:
B
Microsoft교재 MB6-703 MB6-703최신버전덤프
Explanation:
Field:Min.
contribution margin Select this check box if you want calculations to generate a
warning
message when the profitability percentage of the item is lower than
you want.
Pass4Test 에서는 최신버전의 C2090-305시험에 대비한 고품질 덤프와 HP2-Z29시험 최신버전덤프를 제공해드립니다. Pass4Test의 74-335덤프의 VCE테스트프로그램과 NSE5덤프는 한방에 시험을 패스하도록 도와드립니다. 최고품질 9A0-350시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.