OCP 10G Developer

[1Z0-047] Oracle Database 10g : lntroduction to 10g SQL

[1Z0-147] Oracle Database 10g :PL/SQL 1

[1Z0-146] Oracle Database 10g : Advanced PL/SQL 2

인터넷에는  Oracle 1Z0-146 (Oracle database 11g:advanced pl/sql)시험대비공부자료가 헤아릴수 없을 정도로 많습니다.이렇게 많은 Oracle 1Z0-146 (Oracle database 11g:advanced pl/sql) 부자료중 대부분 분들께서 저희 Pass4Test를 선택하는 이유는 덤프 업데이트가 다른 사이트보다 빠르다는 것이 제일 큰 이유가 아닐가 싶습니다. Pass4Test의 Oracle 1Z0-146 (Oracle database 11g:advanced pl/sql)덤프를 구매하시면 덤프가 업데이트되면 무료로 업데이트된 버전을 제공받을수 있습니다.Oracle 1Z0-146 (Oracle database 11g:advanced pl/sql)시험을 통과하여 자격증을 취득하여 IT 업계에서의 자신의 자리를 지키려면 많은 노력이 필요합니다. 회사일도 바쁜데 시험공부까지 스트레스가 장난아니게 싸이고 몸도 많이 상하겠죠. Pass4Test는 여러분을 위해 최신  Oracle 1Z0-146 (Oracle database 11g:advanced pl/sql)시험에 대비한 Oracle 1Z0-146 (Oracle database 11g:advanced pl/sql)덤프를 발췌하였습니다. Oracle 1Z0-146 (Oracle database 11g:advanced pl/sql)덤프는  Oracle 1Z0-146 (Oracle database 11g:advanced pl/sql)시험의 기출문제와 예상문제가 묶어져 있어 시험적중율이 굉장히 높습니다. 쉽게 시험을 통과하려면 Pass4Test의 Oracle 1Z0-146 (Oracle database 11g:advanced pl/sql)덤프를 추천합니다.

NO.1 View the Exhibit and examine the procedure to create a trigger name based on the table name supplied
to the procedure.
Which three statements are appropriate for protecting the code in the procedure from SQL injection?
(Choose three.)
A. Explicitly validate the identifier length limit.
B. Add AUTHID DEFINER to the definition of the procedure.
C. Use PRAGMA RESTRICT_REFERENCES in the procedure.
D. Filter out control characters in user-supplied identifier names.
E. Use the object ID of the table from the data dictionary to build the trigger name.
Answer: ADE

NO.2 View the Exhibit and examine the structure of the EMPLOYEES table.
Examine the following PL/SQL block:
DECLARE
TYPE EmpList
IS VARRAY(2) OF employees.employee_id%TYPE NOT NULL;
v_employees EmpList := EmpList();
BEGIN
DBMS_OUTPUT.PUT_LINE(v_employees.COUNT);
v_employees.EXTEND;
v_employees(1) := 30;
END;
/
Which statement is true about the outcome on executing the above PL/SQL block?
A. It executes successfully and displays the value 2.
B. It executes successfully and displays the value 0.
C. It generates an error because EXTEND cannot be used for varrays.
D. It generates an error because the declaration of the varray is not valid.
Answer: B

NO.3 Which two statements are true about SecureFile LOB options? (Choose two.)
A. The COMPRESSION HIGH option can be enabled only for CLOBs.
B. The COMPRESSION HIGH option can be enabled for all internal LOBs.
C. The DECRYPT option can be used to remove encryption only if the LOB column is empty.
D. The DECRYPT option can be used to remove encryption from LOB columns that are empty or contain
data.
Answer: BD

NO.4 Examine the code in the following PL/SQL block:
DECLARE
TYPE NumList IS TABLE OF INTEGER;
List1 NumList := NumList(11,22,33,44);
BEGIN
List1.DELETE(2);
DBMS_OUTPUT.PUT_LINE
( 'The last element# in List1 is ' || List1.LAST ||
' and total of elements is '||List1.COUNT);
List1.EXTEND(4,3);
END;
/
Which two statements are true about the above code? (Choose two.)
A. LAST and COUNT give different values.
B. LAST and COUNT give the same values.
C. The four new elements that are added contain the value 33.
D. The four new elements that are added contain the value 44.
Answer: AC

NO.5 In a user session, tracing is enabled as follows:
SQL> EXECUTE
DBMS_TRACE.SET_PLSQL_TRACE(DBMS_TRACE.TRACE_ENABLED_LINES);
PL/SQL procedure successfully completed.
You executed the procedure as follows:
SQL> EXECUTE PROC10
PL/SQL procedure successfully completed.
When you examine the PLSQL_TRACE_EVENTS table, you find that no trace information was
written into it.
View the Exhibit.
What is the reason for this?
A. The PROC10 procedure is created with the invoker's right.
B. The PROC10 procedure is not compiled with the DEBUG option.
C. Tracing is not enabled with the TRACE_ENABLED_CALLS option.
D. The TRACE_ENABLED parameter is set to FALSE for the session.
Answer: B

NO.6 Which two statements are true about associative arrays and varrays? (Choose two.)
A. Only varrays must start with the subscript 1.
B. Only varrays can be used as column types in database tables.
C. Both associative arrays and varrays must start with the subscript 1.
D. Both associative arrays and varrays can be used as column types in database tables.
Answer: AB

NO.7 View the Exhibit to examine the PL/SQL code for the GET_METADATA function. Which statement is
true about the metadata gathered by the function?
A. The end result is the creation of DDL for the TIMECARDS table with all instances of the HR schema
changed to SCOTT.
B. The end result is the creation of an XML document for all tables with all physical, storage, logging, and
other segment attributes.
C. The end result is the creation of DDL for all tables with all instances of the HR schema changed to
SCOTT along with all physical, storage, logging, and other segment attributes.
D. The end result is the creation of DDL for all tables and associated indexes with all instances of the HR
schema changed to SCOTT along with all physical, storage, logging, and other segment attributes.
Answer: A

NO.8 Which statement describes the purpose of the plshprof command?
A. It produces HTML output from raw profiler output.
B. It produces HTML output from profiler tables in the database.
C. It populates profiler tables in the database from raw profiler output.
D. It populates profiler tables in the database from raw profiler output.
Answer: A

NO.9 The database instance was recently started up. Examine the following parameter settings for the
database instance:
NAME TYPE VALUE
------------------------------------ ----------- ----------------------------
result_cache_max_result integer 5
result_cache_max_size big integer 0
result_cache_mode string MANUAL
result_cache_remote_expiration integer 0
.........
You reset the value for the result_cache_max_size parameter by issuing the following command:
SQL> ALTER SYSTEM SET result_cache_max_size = 1056k SCOPE = BOTH;
System altered.
Which statement is true in this scenario?
A. 1056 KB is allocated for the result cache and the result cache is enabled.
B. 1056 KB is allocated for the result cache, but the result cache is disabled.
C. The results for only the queries that have the RESULT_CACHE hint are cached.
D. The results for all the queries except those having the NO_RESULT_CACHE hint are cached.
Answer: B

NO.10 Examine the commands:
CREATE TYPE typ_course_tab IS VARRAY(5) OF VARCHAR2(20)
/
CREATE TYPE typ_course_nst
AS TABLE OF typ_course_tab
/
CREATE TABLE faculty
( faculty_id NUMBER(5),
faculty_name VARCHAR2(30),
courses typ_course_nst)
NESTED TABLE courses STORE AS course_stor_tab
/
INSERT INTO faculty
VALUES (101, 'Jones', NULL);
UPDATE (SELECT courses FROM faculty WHERE faculty_id=101) SET courses =
typ_course_nst(11,'Oracle');
Which statement is true about the execution of these commands?
A. All the commands execute successfully.
B. Only the first two commands execute successfully.
C. Only the first four commands execute successfully.
D. Only the first three commands execute successfully.
Answer: C

NO.11 Which two types of metadata can be retrieved by using the various procedures in the
DBMS_METADATA PL/SQL package.? (Choose two.)
A. report of invalidated objects in a schema
B. report of statistics of an object in the database
C. DDL for all object grants on a table in the database
D. data definition language (DDL) for all objects in a schema
Answer: CD

NO.12 Examine the structure of the EMPLOYEES table in the SCOTT schema.
Name Null? Type
----------------------- --------------- ---------------
EMPLOYEE_ID NOT NULL NUMBER(6)
FIRST_NAME VARCHAR2(20)
LAST_NAME NOT NULL VARCHAR2(25)
SALARY NOT NULL NUMBER(8,2)
COMMISSION_PCT NUMBER(2,2)
DEPARTMENT_ID NUMBER(4)
View the Exhibit and examine the code for the EMP_TOTSAL procedure created by user SCOTT.
Which statement is true regarding the EMP_TOTSAL procedure?
A. It is created successfully, but displays the correct output message only for existent employee IDs.
B. It is created successfully and displays the correct output message for both existent and nonexistent
employee IDs.
C. It generates an error because the %NOTFOUND attribute cannot be used in
combination with a SELECT INTO statement
D. It generates an error because a user-defined exception has to be included whenever
the %NOTFOUND attribute is used in combination with a SELECT INTO statement.
Answer: A

NO.13 Examine the structure of the DEPARTMENTS table.
Name Null? Type
----------------------------- ------------ ----------
DEPARTMENT_ID NOT NULL NUMBER(4)
DEPARTMENT_NAME NOT NULL VARCHAR2(30)
LOCATION_ID NUMBER(4)
View the Exhibit and examine the code that you plan to use for creating a package to obtain the
details of an employee using a host variable on the client side.
In SQL*Plus, you plan to use the following commands:
SQL> VARIABLE x REFCURSOR
SQL> EXECUTE emp_data.get_emp(195,:x)
SQL> PRINT x
Which statement is true about the above scenario?
A. The package executes successfully and passes the required data to the host variable.
B. The package specification gives an error on compilation because cursor variable types cannot be
defined in the specification.
C. The package specification gives an error on compilation because the cursor variable parameter was
specified before you defined it.
D. The package executes successfully, but does not pass the required data to the host variable because
the cursor is closed before the PRINT statement runs.
Answer: D

NO.14 Which two statements correctly describe the features of SecureFiles? (Choose two.)
A. Compression does not entail table or index compression and vice-versa.
B. Encryption stores the encryption keys for the LOB columns inside the database.
C. Encryption stores the encryption keys for the LOB columns outside the database.
D. Compression stores identical data occurring two or more times in the same LOB column as a single
copy for the table.
Answer: AC

NO.15 DATA_FILES is a directory object that contains the DETAILS.TXT text file.
You have the required permissions to access the directory object.
You create a table using the following command:
CREATE TABLE clob_tab(col2 CLOB);
View the Exhibit and examine the PL/SQL block that you execute for loading the external text file into the
table that currently has no rows. The PL/SQL block results in an error.
What correction must be done to ensure the PL/SQL block executes successfully?
A. The L_OUT variable must be initialized to an empty locator.
B. The L_OUT variable has to be declared as a temporary LOB.
C. The A_CLOB variable has to be declared as a temporary LOB.
D. The clause RETURNING col2 INTO a_clob should be added to the INSERT statement to correctly
initialize the locator.
Answer: D